Instruction/ maintenance manual of the product MAC-558IF-E Mitsubishi Electronics
Go to page of 12
1 INST ALLA TION GUIDE.
2 Setting information MAC -558IF-E address(MAC) MAC -558IF-E serial number(ID) MAC -558IF-E code(PIN) Indoor unit model name Indoor unit serial number Outdoor unit model name Outdoor unit serial numbe.
3 Once registered you will be able to control your heat pump with your smartphone, tablet or online using an internet connection (for a list of compatible devices please visit the Mitsubishi Electric website).
4 The following steps explain how to connect the MAC -558IF-E Adaptor to a Mitsubishi Electric Heat P ump. Wi-Fi Control: Installation Instructions Information for installers EQUIPMENT REQUIRED FOR IN.
5 Run the cables down the back of the unit with the other cables. T uck cabling away and secure. Reassemble the indoor unit and restore power to the system. Check that the MAC -558IF-E Adaptor is flashing. The install has now been completed. The adaptor is now able to be connected to the user ’s router .
6 Wi-Fi Control: Installation Instructions Information for users The following steps explain how to connect the MAC -558IF-E Adaptor to a router . KEY (LED LIGHTS): ON OFF FLASHING Check Wi-F i and WPS are enabled on your router . The connection procedure varies depending on your router – refer to your router manual for more information.
7 When LED 1 remains solid for 5 seconds the adaptor is connecting to your router . Next, the bottom light (LED 3) will start flashing as it connects to the internet. This may continue for up to 10 minutes. When LED 1 and LED 3 flash alternately the unit is successfully connected to the internet.
8 Safety Instructions • Read all safety instructions before using the W i-Fi Adaptor . • This installation manual contains important safety information. Be sure to comply with the instructions. • After installing the Wi-Fi Adaptor , provide this installation manual to the user .
9 Caution (Improper handling may have consequences, including injury or damage to house.) • T o prevent damage from static electricity , touch a nearby metal body to discharge static electricity from yourself before touching the Wi-Fi Adaptor . • Static electricity from the human body may damage the Wi-Fi Adaptor unit.
10 LED pattern Description LED1 LED2 LED3 Power is ON or software downloaded (0.5-sec interval) (0.5-sec interval) (0.5-sec interval) ALL settings reset WPS activated (PBC) (0.
11 Main causes that WPS failed are as follows: Communication distance (from the Wi-Fi Adaptor to access point), access point settings (encryption, authentication, limit of connections, etc.) Refer to the router ’s instruction manual for more information.
12 Mitsub ishi Electric N ew Zealand www .mitsubishi-electric.co.nz/wifi WELLINGTON HEAD OFFICE 1 Parliament Street PO Box 307 72 Lower Hut t 5040 Phone 0800 639 434 Fax ( 04) 560 9 133 Helpl ine openi ng hours 8.30am - 5 .00pm weekd ays Mitsub ishi Electric Aus tralia ww w .
An important point after buying a device Mitsubishi Electronics MAC-558IF-E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mitsubishi Electronics MAC-558IF-E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mitsubishi Electronics MAC-558IF-E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mitsubishi Electronics MAC-558IF-E you will learn all the available features of the product, as well as information on its operation. The information that you get Mitsubishi Electronics MAC-558IF-E will certainly help you make a decision on the purchase.
If you already are a holder of Mitsubishi Electronics MAC-558IF-E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mitsubishi Electronics MAC-558IF-E.
However, one of the most important roles played by the user manual is to help in solving problems with Mitsubishi Electronics MAC-558IF-E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mitsubishi Electronics MAC-558IF-E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
