Instruction/ maintenance manual of the product HC1100 Mitsubishi Electronics
Go to page of 37
HC100 HOME THEA TER DLP™ PROJECT OR MODEL HC100 User Manual FRANÇAIS ENGLISH This User Manual is important to you. Please read it before using your projector.
EN-2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EN-3 ENGLISH Contents Declaration of Conformity Model Number : HC100 T rade Name : MITSUBISHI ELECTRIC Responsible party : Mitsubishi Digital Electronics America, Inc. 9351 Jeronimo Road, Irvine, CA 92618 U.S.A T elephone number : +1-(949) 465-6000 This device complies with Part 15 of the FCC Rules.
EN-4 Important safeguards Please read all these instructions regarding your pro- jector and retain them for future reference. Follow all warnings and instructions marked on the projector. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated.
EN-5 ENGLISH WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer.
EN-6 Preparating your projector Cables Power supply parts Remote control parts Power cord (two) (246C483-10, 246C383-20) Remote control (290P130-10) R03 (Size-AAA) battery (two) RS-232C cable (246C508.
EN-7 ENGLISH Overview 3 2 1 57 10 9 8 6 4 2 1 3 4 8 5 6 7 9 1 FOCUS ring 2 ZOOM ring 3 Control panel 4 Air outlet grille 5 Remote control sensor (Front) 6 Air inlet grille 7 Air outlet grille 8 T ermi.
EN-8 ON DV I PC COMP COLOR TEMP AUT O POSITION ASPECT GAMMA A.P . C.T . VIDEO S-VIDEO POWER OFF COMPUTER D VI-D (HDCP) COMPONENT VOLUME ENTER MENU 1 2 3 4 5 6 7 8 14 15 13 12 11 9 10 1 2 3 Preparating.
EN-9 ENGLISH Using the remote control 30 ˚ 30 ˚ 30 ˚ 30 ˚ 20 ˚ 10 ˚ 20 ˚ 10 ˚ 20 ˚ 20 ˚ Operational range of the remote control • Keep the remote control photo-sensor out of direct sunlight or fluorescent lamp light. • Keep the remote control photo-sensor at least 2 m away from fluorescent lamps.
EN-10 Setting up your projector W A A=B B Setting up the screen Install the screen perpendicularly to the projector . If the screen can not be installed in such a way , adjust the projection angle of the projector .
EN-11 ENGLISH C B DD A 40 102 32 81 24 61 32 81 18 46 3.0 8 50 1.3 61 1.5 8.8 22.4 60 152 48 122 36 91 48 122 27 69 4.5 11 76 1.9 92 2.3 13.2 33.6 70 178 56 142 42 107 56 142 32 80 5.3 13 89 2.3 108 2.7 15.4 39.2 80 203 64 163 48 122 64 163 36 91 6.0 15 102 2.
EN-12 V iewing video images A. Connecting the projector to video equipment Preparations: • Make sure that the power of the projector and that of the video equipment are turned off.
EN-13 ENGLISH COMPONENT VIDEO IN P B /C B Y P R /C R P B /C B Y P R /C R 1 2 COMPONENT VIDEO IN 3 4 COMPONENT VIDEO IN 1 3 4 2 Connecting to a Video player, etc. 1. Connect one end (yellow) of the supplied audio/video cable to the VIDEO terminal of the projector .
EN-14 V iewing video images (continued) Connecting to video equipment having a DVI-D terminal Y ou can project high-quality images by connecting the DVI-D terminal of this projector to video equipment having a DVI-D output terminal.
EN-15 ENGLISH C. Projecting images Preparation: • Remove the lens cap. • T urn on the power of the connected video equipment. 1. Confirm the POWER indicator lights up red.
EN-16 V iewing video images (continued) To stop projecting: 8. Press the POWER button on the projector or the OFF ( ) button on the remote control. • A confirmation message is displayed. • T o cancel the procedure, leave the projector for a while or press the MENU button.
EN-17 ENGLISH Setting the aspect ratio Y ou can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the setting according to the type of the input video signal. How to change the settings: With the remote control: 1.
EN-18 COMPONENT VIDEO IN 2 1 COMPONENT VIDEO IN 2 1 V iewing computer images A. Connecting the projector to a computer Preparation: • Make sure that the power of the projector and that of the computer are turned off. • When connecting the projector to a desktop computer , disconnect the RGB cables that are connected to the monitor .
EN-19 ENGLISH C. Projecting images Preparation: • Remove the lens cap. • T urn on the power of the connected computer . 1. Confirm the POWER indicator lights up red.
EN-20 AUTO POSITION button When the image supplied from the computer is displaced, carry out the following procedure. 1. Display a bright image (such as a full-screen display of the Recycle Bin window). 2. When the screen saver has been enabled, disable it.
EN-21 ENGLISH A UT O , NTSC , P AL , SECAM , 4.43NTSC , P AL-M , P AL-N , P AL-60 IMAGE CONTRAST 0 - 60 BRIGHTNESS ± 30 sRGB ON , OFF CineRichColor A UT O, 0 - 10 9300K 6500K 5900K USER COLOR TEMP .
EN-22 CONTRAST IMAGE 0 BRIGHTNESS 0 6200K 0 COLOR AUTO 0 SVGA60 OFF AUTO TINT 0 SHARPNESS COLOR TEMP. GAMMA MODE sRGB CineRichColor opt. IMAGE REVERSE OFF AUTO POWER ON OFF AUTO POWER OFF KEYSTONE ON INSTALLATION ON BACK COLOR OFF BLUE SVGA60 SPLASH SCREEN 0 opt.
EN-23 ENGLISH 3. FEATURE menu ITEM SETTING FUNCTION MENU POSITION 2 positions Use to change the position of the menu. CINEMA MODE AUTO The film mode will be automatically activated when a film source signal is inputted. OFF The film mode will not be activated.
EN-24 Adjusting projected images To adjust the brightness (CONTRAST and BRIGHTNESS): Y ou can make adjustments for the brightness of the projected image using the menu. (See Page 21 for menu setting.) 1. Display the IMAGE menu. 2. Select CONTRAST or BRIGHTNESS by pressing the { or } button.
EN-25 ENGLISH To adjust the tone of white (COLOR TEMP.): Y ou can select a preset color temperature (white tone) using the menu. (See Page 21 for menu setting.) 1. Display the IMAGE menu. 2. Select COLOR TEMP . by pressing the { or } button. 3. Select your desired color temperature by pressing the { or } button.
EN-26 This projector automatically and properly projects video signals supplied from the computer . However , some video signals may not be projected, depending on the type of the computer . In such a case, press the AUTO POSITION button. (See Page 20.
EN-27 ENGLISH MENU ACCESS SVGA60 opt. LOCK UNLOCK OK OK PASSWORD CONFIRM O K CANCEL MENU ACCESS SVGA60 opt. LOCK UNLOCK OK OK PASSWORD O K CANCEL Password function This projector is equipped with the password func- tion that is designed for wrong operation by children and restriction on operation by other than specified users.
EN-28 Replacing the lamp This projector is equipped with a lamp to project images. This lamp is a consumable. It may burn out or its brightness may decrease during use. In such cases, replace the lamp with a new one as soon as possible. Be sure to replace the lamp with a new lamp separately sold that is exclusive to this projector .
EN-29 ENGLISH (c) (a ) (b) (c) To replace the lamp: 1. Reverse the projector gently . 2. Loosen the screw (a) using a Phillips screwdriver (+), and remove the lamp cover (b). 3. Loosen the screws (c) using a Phillips screwdriver (+). 4. Pull up the handle.
EN-30 61 245 310 100 5 COMPONENT VIDEO IN Asking for installation To view images projected by the ceiling- mounted projector from the front: When the projector is installed on the ceiling, the special ceiling mount bracket, which is separately sold, is required.
EN-31 ENGLISH POWER Off Steady red Blinking red / green ST A TUS Off Off Blinking orange Blinking green Steady red Off Steady or Blinking Solution • Connect the power cord to the projector . • Plug the power cord into a wall outlet. • If any objects are blocking the air inlet or outlet grille, remove them and carry out the following.
EN-32 T roubleshooting (continued) Images are not displayed correctly. Problem Projected images are shaking. Projected images are displaced. Projected images are distorted. Projected images are dark. Projected images are blurred. White dots are seen on projected images.
EN-33 ENGLISH Others Problem The exhaust vents emit warm air . No audio is output. The menu can't be used. “ TEMPERA TURE!! ” is displayed. The mark appears. The remote control doesn't function easily or at all. The buttons on the control panel (except for the POWER button) don ’ t function.
EN-34 Indicators POWER Steady red Steady green Steady green ST A TUS Off Blinking green Steady green CONDITION Stand-by Lamp stand-by (about 1 minute) The power is on. (Normal condition) NOTE The POWER button cannot be used to switch between on and off.
EN-35 ENGLISH Specifications The specifications and outside appearance of the projector are subject to change without prior notice. Type Model Display Technology Projection lens Light-source lamp Imag.
EN-36 TV60, 480i(525i) – 15.73 59.94 854 x 480 TV50, 576i(625i) – 15.63 50.00 854 x 480 1080i 60 (1 125i 60) – 33.75 60.00 854 x 480 *2 1080i 50 (1 125i 50) – 28.13 50.00 854 x 480 480p (525p) – 31.47 59.94 854 x 480 *2 576p (625p) – 31.25 50.
North America MESCA (Mitsubishi Electric Sales Canada Inc.) http://www .mitsubishielectric.ca Information T echnologies Group, 4299 14th A venue, Markham, Ontario L3R 0J2, Canada Sales Phone :+1-(905) 475-7728 Fax :+1-(905) 475-7958 E-mail :projectors@mitsubishielectric.
An important point after buying a device Mitsubishi Electronics HC1100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mitsubishi Electronics HC1100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mitsubishi Electronics HC1100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mitsubishi Electronics HC1100 you will learn all the available features of the product, as well as information on its operation. The information that you get Mitsubishi Electronics HC1100 will certainly help you make a decision on the purchase.
If you already are a holder of Mitsubishi Electronics HC1100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mitsubishi Electronics HC1100.
However, one of the most important roles played by the user manual is to help in solving problems with Mitsubishi Electronics HC1100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mitsubishi Electronics HC1100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
