Instruction/ maintenance manual of the product EW330U Mitsubishi Electronics
Go to page of 60
EX320U/EW330U ENGLISH DLP™ PROJECT OR MODEL EX320U/EW330U User Manual This User Manual is important to you. Please read it before usin g your projec tor .
EN-2 The lightning flash with arrowhea d symbol within an equilateral tria ngle is intended to aler t the user to the presence of unins u- lated "dangerous voltage" wi thin the product ’s encl osure that may be of sufficient magnitude to constitute a risk of electric shock.
EN-3 ENGLISH WA R N I N G • The lens cap is for protecting the lens. If you leave th e lens cap on the lens with the projector turned on , it may be deformed because of heat build-up. Remove the lens cap when you turn on the projector . • One of power cor ds for the U.
EN-4 Content s Important safeguards ......... ............ ........... ............. ........... ........... .............. ........... ........... .... ....... ........... 5 Projecto r exterior view ............. ........... ........... ............ .
EN-5 ENGLISH Import ant safeguards Please read all t hese instructions regar ding your projector and retain them for future reference. Fol low all warnings and instructions marked on the projecto r . 1. Read instructions All the safety and operating instr uctions should be read before the appliance is operated.
EN-6 WA R N I N G : Unplug immediately if there is something wrong with your projector . Do not operate if smoke, stra nge noise or odor comes out of your pro- jector . It may cause fire or electric shock. In this case, unplug immedi - ately and contact yo ur dealer .
EN-7 ENGLISH Projector exterior view 1. External control panel (See "Projector" on page 8 for details.) 2. Lamp cover 3. V ent (heated air exhaust) 4. Quick-release button 5. Lens cover 6. Focus ring and Zoom ring 7. Front IR remote sensor 8.
EN-8 Controls and functions Pr ojector 1. Focus ring Adjusts the focus of the pro jected imag e. See "Fine- tuning the image size and clarity" on page 25 for details. 2. Zoom ring Adjusts the size of the image. See "Fine-tuning the image size and clarity" on page 25 for details.
EN-9 ENGLISH Remote control 1. POWER (ON/ST ANDBY) T oggles the projector betwee n standby mode and on. See "Star ting up the projector" on page 21 and "Shutting down the projector" on page 34 for details. 2. FREEZE Freezes the projected i mage.
EN-10 Using the remote control for the first time Pull the tab before us ing the remote control. Remote control effective range Infra-Red (IR) remote control sensor is located on the front of the pr ojector .
EN-11 ENGLISH Positioning your projector Choosing a location Y our room layout or personal preference will dictate which inst allation location you select.
EN-12 Obtaining a pr eferr ed pr ojected image size The distance from the project or lens to the screen, the zoom setting (if available), and the video format each factors in the projected image size.
EN-13 ENGLISH How to determine the position of th e pr ojector for a given screen size 1. Determine the aspect ratio of your screen, 16:9 or 4:3. If you have a 4: 3 screen, refer to the table labeled "(Standard)" . If you have a 16:9 screen, refer to the table labeled "(16:9)" .
EN-14 Layout of the pr ojector Image size varies de pending on the distance between the screen and the projector . Front pr ojection (S tand ard) EX320U EW330U Screen Distance from t he screen: L Hd Diagonal Size Width: W Height: H Shortest (Wi de) Longest (T ele) inch cm inch cm inch cm inch m inch m inch cm 40 102 32 81 24 61 48 1.
EN-15 ENGLISH (16:9) EX320U EW330U The above figures are approximate and may be slightly diffe re nt from the actual measurement s. Mitsubishi recommends that if you intend to permanently install the .
EN-16 Connection When connecting a signal source to the projector , be sure to: 1. T urn all equipment of f be fore making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. • See the owner ’s guide of each device for details about its connections.
EN-17 ENGLISH Connecting a monitor If you want to view your presentation close-up on a m onitor as well as on the screen, you can connect the MONITOR OUT signal output jack on the projector to an exte rnal monitor following the instructions below: T o connect the proj ector to a monitor: 1.
EN-18 Connecting an HDMI device Y ou should use an HDMI cable when making conn ection between the proj ector and HDMI devices. T o connect the projector to an HDMI device: 1. T a ke an HDMI cable and conne ct one end to the HDMI output port of the video device.
EN-19 ENGLISH The final connection path should be like that shown in th e following diagram: If the selected video image is not displayed af ter the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly .
EN-20 Connecting a composite V ideo source device Examine your V ideo source device to determine if it ha s a set of unused composite V ideo output sockets available: • If so, you can continue with this p rocedure. • If not, you will need to reas sess which method you can use to connect to the device.
EN-21 ENGLISH Operation S tarting up the pr ojector 1. Plug the power cord into the projector and into a wall socket. Turn on the wall socket switch (where fitted). Check that the POWER indicator light on the projector lights orange after power has been applied.
EN-22 Using the menus The projector is equipped with On-S creen Display (OSD) menus for making various adjustments and settings. Below is the overvie w of the OSD menu. Below is an example about how to set the OSD language. 1. Press MENU/EXIT on the projector or remote control to turn the OSD menu on.
EN-23 ENGLISH Utilizing the password function For security purposes and to help prevent unauthorized us e, t he projector in cludes an option for setting up password security . The password can be set through the On-Scree n Display (OSD) menu. For details of the OSD menu operation, please refer to "Using the menus" on page 22 .
EN-24 Password: __ __ __ __ __ __ Keep this number i n a safe place. 5. Confirm the new password by re-entering the new password. 6. Y ou have successfully assigned a new password to the pr ojector . Reme mber to ente r the new password next time the projector is started.
EN-25 ENGLISH Adjusting the projected image Adjusting the projection angle The projector is equipped with 1 quick- rel ease adjuster foot and 1 rear adjuster foot. These adjusters cha nge the image height and projection angle. T o adjust the projector: 1.
EN-26 Corr ecting keystone Keystoning refers to the situation where the projected image is notic eably wider at either the top or bottom. It occurs when the projector is not pe rpendicular to the screen. T o correct this, besides adjusting the he ight of the projector , you will need to manually correct it following on e of these ste ps.
EN-27 ENGLISH Selecting the aspect ratio The 'aspect rati o' is the ratio of the image width to the image height. Most an alog TV and computers are in 4:3 ratio, and digital TV and DVDs ar e usually in 16:9 ratio.
EN-28 5. Full : Scales an image to full screen size (16:10). The image is projected to fit all over scre en. (EW330U only) 4:3 picture 16:9 pi cture 16:10 picture.
EN-29 ENGLISH Optimizing the image Selecting a pictur e mode The projector is preset wi th several predefined picture modes so that you can choose one to suit your ope rating environment and i nput signal picture type. T o select a operation mode that su its your need, you can follow one of the following steps.
EN-30 Fine-tuning the image quality in user modes According to the detected signal type, there are some user-def inable f unctions available when User 1 or User 2 mode is selected.
EN-31 ENGLISH 3D Color Management In most installa tion situations, color manage ment will not be necessary , such as in classroom, meeting room, or lounge room situations where lights remain on, or where building external windows allow daylight into the room.
EN-32 Setting the pr esentation timer The presentation time r can i ndicate the presentation time on the screen to help you achieve better time management wh en giving presentations.
EN-33 ENGLISH Hiding the image In order to draw the audience's full attention to the presenter , you can use BLANK on the projector or remote control to hide the screen image . Press any key on the projector or remote control to restore the image.
EN-34 1. Repeat steps 1-2 above. 2. Press to highlight Volume and press / to select a desired sound level. Standby Audio Out Selecting On enables the function. The projector can output an Audio input signal when it is in standby mode and Audio input and Audio out jack is co rrectly connected to devices.
EN-35 ENGLISH 3D W atching 3D Conten t Y ou can enjoy 3D Conten t with this pro jector . In order to watch 3D Content, you need to have the following items: 1. Field-seque ntial 3D video contents 2. DLP Link active ele ctr onic shutter glasses (Field-sequential: The system which displays alte rn ately t he image fo r the left eye and the right eye.
EN-36 • 3D image may not appear on the screen depending on the PC performance such as graphics board, memory , or CPU. • The signals in the below tabl e can be displayed with viewing 3D Contents on the projector . If a different signal is fed, the projector shows no 3D content s even with the 3D option set to On in the DISPLAY menu.
EN-37 ENGLISH Supervising and controlling by computer W ith a proper LAN cable connection a nd LAN Control settings, you can operate the projector from a computer using a web browser or PJLink™ application wh e n the computer and the proje ctor are con nected to th e same loca l area network.
EN-38 Contr olling the pr ojector r e mo tely thr ough a web browser (e-Contr ol™) Once you have the correct IP address for the projector and the projector is on or in st andby state, you can use any computer that is on the sam e local area network to control the proje ctor .
EN-39 ENGLISH iv . Once set, access to the remote network operation page on this projector has been password-protecte d. T o enable this function, check the box in front of "Enable" and type in your desired password in the New Password column and confirm the new passw ord by re-entering the new password at the Confirm column.
EN-40 • For the specifications of PJLink™, access to the W eb site of Ja pan Business Mach ine and Information Syste m Industries Association (JBMIA). (h ttp://pjlink.jbmia.or .jp/english) • This projector is fully compliant to the specifications of JBMIA PJLink™ Cl ass 1.
EN-41 ENGLISH • The PJLink "INPT?" will be replied only when the source is displayed on scree n. When there is no signal, only "Unavailable Ti me!" will be answered.
EN-42 Menu operation Menu system Please note that the on-screen display (OSD) menu s vary acco rding to th e signal type selected. Main menu Sub-menu Options 1. DISPLAY Wall Screen Off/Light Yellow/Pink/Light Green/Blue/ Blackboard Aspect Ratio A uto/Real/Full (EW330U only)/4:3/16:9 Keystone Position Phase H.
EN-43 ENGLISH Note that the me nu items are availabl e when the projector de tects at least one valid signa l. If there is no equipment connected to the projector or no signal de tected, limited menu items are accessible.
EN-44 Description of each menu FUNCTION DESCRIPTION Wall Screen Corrects the projected picture’ s colo r when the projection surface is not white. See "Using W all Screen" on page 31 for details. Aspect Ratio There are four options to set the im age's aspect ratio depe nding on your input signal source.
EN-45 ENGLISH FUNCTION DESCRIPTION Setting Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. S ee "Selecting a picture mode" on page 29 for details. Brightness Adjusts the brightness of the image.
EN-46 FUNCTION DESCRIPTION Presentation T imer Reminds the presenter to finish the presentation within a certain time frame. See "Setting the presentation timer" on page 32 for details. Language Sets the languag e for the On-Screen Display (OSD) menu s.
EN-47 ENGLISH FUNCTION DESCRIPTION Security Settin gs Change password Y ou will be asked to ente r the current password b efore changing to a new one. Power on lock See "Utilizing the password function" on page 23 for details.
EN-48 Maintenance Car e of the projector Y our projector needs little maintenance. The only thing you need to do on a regul ar basis is to keep the lens clean. Never remove any parts of the projec tor except the lamp. Contact your deal er if other parts need replacing .
EN-49 ENGLISH Lamp information Getting to know the lamp hour When the projector is in operation, the duration (in hours) of lamp usage is automatica lly calculated by the built-in timer .
EN-50 Timing of r eplacing the lamp When the lamp indicator lights up red or a message appears suggesting it is time to replace th e lamp, please install a new lamp or consult your dealer . An ol d lamp may cause a malfunction in the projector and in some instances the lamp may explode.
EN-51 ENGLISH Replacing the lamp Spare lamp for EX320U/EW330U: VL T -EX320LP • Be sure to replace the lamp with a new lamp sep arately sold that is exclusive to this projector .
EN-52 13. Restart the projector . Do not t urn the power on with the l amp cove r removed . Resetting the lamp timer 14. After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM SET UP: Advanced > Lamp Settings menu. Press MODE/ENTER .
EN-53 ENGLISH • Do not reset if the lamp is not new or replaced as this could cause damage. • This projector uses a lamp that cont ains mercury . Disposal of the lamp or the projector with the lamp may be regulated due to environment al considerations.
EN-54 Indicators Light St atus & Description Power Te m p Lamp Power events Orange Off Off Stand-by mode Green Flashing Off Off Powering up Green Off Off Normal operation Orange Flashing Off Red • The projector needs 90 seconds to cool down as it wa s abnormally shut down without the normal cooling down process.
EN-55 ENGLISH T roubleshooting The projector does not turn on. No picture Blurred image Remote control does not work The password is incorrect The LAN function cannot be used Cause Remedy There is no power from the power cable. Plug the power cord into the AC inlet on the projector, and plug the power cord into the power outlet.
EN-56 Specifications Pr ojector specifications All specifications are subject to change without notice. General Product name DLP™ Projector Model name EX320U EW330U Optical Resolution 1024 x 768 XGA 1280 x 800 WXGA Display system 1-CHIP DMD Lens F/Number F = 2.
EN-57 ENGLISH Dimensions 282 mm (W) x 92 mm (H ) x 229 mm (D) (Not including protrusion) T iming chart Supported timing for PC input * The projector only supports the timi ng (720 x 400) with 5 lines (R, G , B, H, V). * EX320U dose not support the timing of WXGA_120.
EN-58 Supported timing for HDMI (HDCP) input * EX320U dose not support the timing of WXGA_120. Resolution Mode V ertical Frequency (Hz) Horizontal Frequency (kHz) Clock (MHz) 720 x 400 720x400_70 70.087 31.469 28.3221 640 x 480 VGA_60 59.940 31.469 25.
EN-59 ENGLISH Supported timing for Component-YP b P r input Displaying a 1080i(1 125i)@60Hz or 1080i(1 125i)@50Hz signal may result in slight image vi brat ion. Supported timing for V ideo and S-V ideo inputs What’ s included in the box Replacement part Signal Format Horizontal Frequenc y (kHz) V ertical Freq uency (Hz) 480i(525i)@60Hz 15.
EN-44 Mitsubishi Projector W arranty , Sales Support and Ser vice Information North Amer ica MDEA (Mitsubishi Digital Electronics America, Inc.) Presentation Products Division 9351 Jeronimo Road Irvine CA 92618, USA For Warranty Registration, visit: http://www .
An important point after buying a device Mitsubishi Electronics EW330U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mitsubishi Electronics EW330U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mitsubishi Electronics EW330U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mitsubishi Electronics EW330U you will learn all the available features of the product, as well as information on its operation. The information that you get Mitsubishi Electronics EW330U will certainly help you make a decision on the purchase.
If you already are a holder of Mitsubishi Electronics EW330U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mitsubishi Electronics EW330U.
However, one of the most important roles played by the user manual is to help in solving problems with Mitsubishi Electronics EW330U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mitsubishi Electronics EW330U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
