Instruction/ maintenance manual of the product M7310N Mitel
Go to page of 30
3300 CITELlink Gateway for 7000 Series Norstar Phones M7310N Phone User Guide.
NOTICE The information contained in this docume nt is believed to be accurate in all respects but is not warranted by M ITEL N ETWORKS J Corporation. The information is subject to change without notice and should not be construed in any way as a commitme nt by M ITEL N ETWORKS or any of its affiliates or subsidiaries.
-i- Contents ABOUT YOUR PHONE 1 Conventions 2 Using Your Norstar Phone with the 3300 CITELlink Gateway 3 TIPS FOR YOUR COMFORT AND SAFETY 3 Don't cradle the handset! 3 Protect your hearing 3 CUST.
-ii- CALL HANDLING 11 Hold 11 Transfer 12 Conference 12 Conference Split 12 Add Held 13 Swap 13 Call Forward 14 Call Forward - Remote 15 Call Forward - End Chaining 15 Call Forward - Forced 16 Call Fo.
-1- ABOUT YOUR PHONE The Mitel Networks 3300 CITELlink Gate way allows your Nortel Networks™ Norstar phone to work on a Mitel Networks 3300 Inte g rated Communications Platform (3300 ICP).
-2- Phone buttons Phone status indicators Conventions The following conventions are used in this user guide: z Fixed-functions keys are identified by bold uppercase letters (for example, TRANS/CONF ). z Softkeys are identified by bold letters and th e word "softkey" (for example, "Press the Yes softkey.
-3- Using Your Norstar Phone with the 3300 CITELlink Gateway Please note the following differences in the way your phone now operates: z You can program speed call numbers, personal keys as well as enable/disable features using SUPERKEY . To navigate through the menus, use the YES and NO softkeys.
-4- CUSTOMIZING YOUR PHONE Ringer Control To adjust the Ringer Volume while the phone is ringing: z Press + or - . To adjust the Ringer Pitch or Vo lume while the phone is idle: 1. Press SUPERKEY . 2. Press the No softkey until "Ringer Adjust?" appears.
-5- Feature Keys To display information abou t a key: 1. Press SUPERKEY . 2. Press a personal key or REDIAL . 3. Press SUPERKEY . To re-program a personal key: Note: Use the personal keys with indicato rs (see page 2) for features that need an indicator (s uch as Do Not Distur b or Call Forward).
-6- MAKING AND ANSWERING CALLS Make a call 1. Lift the handset. 2. If you want to use a Non-Prime Li ne, press a Line Ap pearance key. 3. Dial the number, - OR - Press a Speed Call key. - OR - Press REDIAL . Answer a call z Lift the handset. - OR - Press the flashing Line appe ar ance key and lift the handset.
-7- Phonebook For each letter in the name, press the appropriate key on the keypad until the letter is shown in the display; for example, if the le tter C is required, press the digit 2 three times. Use the softkey to correct errors. If the next letter in a name is on the same key as the pr evious letter, press the softkey before proceeding.
-8- Speed Call Keys You may use Speed Call Keys to make a call or to send a string of digits during a call (press a Speed Call Key during a call to send a multi-digit password, for instance). To dial a stored Speed Call number: 1. Lift the handset. 2.
-9- Speed Call - Personal Note: Personal Speed Call lists must be configured by the Administrator. To store a personal Speed Call number: 1. Lift the handset.
-10- Handsfree Operation To use Handsfree Operation to make calls: 1. If you want to use a Non-Prime Li ne, press a Line Ap pearance key. 2. Dial the number. 3. Communicate by using the sp eaker and the microphone. To use Handsfree Operation to answer calls: 1.
-11- Auto-Answer To enable or disable Auto-Answer: 1. Press SUPERKEY . 2. Press the No softkey until "Auto Answer?" appears. 3. Do one of the following: To enable Auto-Answer, press the TurnOn softkey. To disable Auto-Answer, press the TurnOff softkey.
-12- Transfer To Transfer an active call: 1. Press TRANS/CONF . 2. Dial the number of the third party. 3. Do one of the following: To complete the Tr ansfer, hang up. To announce the Tr ansfer , wait for an answe r, consult, and h ang up. To cancel the Transfer, press CANCEL .
-13- Add Held To move a call on Hold to another line appearance: 1. Press an available line key. 2. Press the Addheld softkey. 3. Press the flashing line key. To add a call on Hold to an exis ting conversation or conference: 1. Press the Addheld softkey.
-14- Call Forward Call Forward lets you redirect incoming calls to an alternate number. Always redirects all incoming calls regardless of the state of yo ur phone. B-Int redirects internal calls wh en your phone is busy, an d B-Ext redirects external calls when your phone is busy.
-15- Call Forward - Remote To forward calls from a remote st ation to your current location: 1. Press SUPERKEY . 2. Press the No softkey until "Call Fo rwarding?" appears. 3. Press the Yes softkey. 4. Press the Next softkey until "I Am Here" appears.
-16- Call Forward - Forced To force an incoming call to be forwarded: z Press the Forward softkey. Call Forward - Override To override Call Forward and ring a station: 1. Lift the handset. 2. Dial *1* . 3. Dial the exte nsion number. Messaging - Advisory To turn Messaging - Advisory on: 1.
-17- Messaging - Callback To leave a message waiting indication on a phone when you hear busy or ringback tone: z Press MESSAGE or the Callback softkey. To respond to a message waitin g condition on your phone: 1. Press MESSAGE . 2. If a password is required, di al your password and press th e Enter softkey.
-18- To set, change, or clear a password (up to 7 digits, not including 0): 1. Press SUPERKEY . 2. Press the No softkey until "Set Pa ssword?" appears. 3. Press the Yes softkey. 4. Do one of the following: To enter a new password, enter your password.
-19- USING ADVANCED FEATURES Account Codes To use Forced Account Codes: 1. Lift the handset. 2. Dial the Account Code digits. 3. Press # . To enter an Account Code during a call: 1. Press SUPERKEY . 2. Press the Yes softkey. 3. Dial the Account Code digits.
-20- Campon To Campon to a busy station: z Press the Wait soft key. To retrieve a call when you hear Campon tone: z Press the Trade softkey. Do Not Disturb To activate or deactivate Do Not Disturb: z Press the Do Not Disturb feature key. - OR - z Press SUPERKEY .
-21- Paging To use Paging: 1. Lift handset. 2. Press the Pager feature key. 3. Dial the Paging zone number (if required). 4. Make the announcement. Direct Paging Direct Paging allows you to page a party through their phon e speaker.
-22- Reminder To program a Reminder: 1. Press SUPERKEY . 2. Press the No softkey until "Timed Reminder?" appears. 3. Press the Yes softkey. 4. Enter the time in 24-hour format. 5. Press the Save softkey. To view, change, and/or cancel a pending Reminder: 1.
-23- Group Paging / Meet Me Answer Group Paging allows you to page a group of telephones through their built-in speakers. You can belon g to as many as three pa g in g g roups with one g roup designated as your "prime" gr oup.
-24- Record a Call This feature uses your voice ma il system to record your phone conversations. Note: You may be required by law to in form the other party that you are recording the conversation. For specific instructions, co nsult your system administrator.
-25- Tag Call Tag Call allows you to "tag" any threat ening call that you re ceive. Using this tag, your system administ rator can identify the sour ce of the malicious call and provide this information to approp riate personel or authorities.
®,™ T rademark of Corporation © Copyright 200 4 , Corporation All rights reserved Mitel Networks Mitel Networks.
An important point after buying a device Mitel M7310N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mitel M7310N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mitel M7310N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mitel M7310N you will learn all the available features of the product, as well as information on its operation. The information that you get Mitel M7310N will certainly help you make a decision on the purchase.
If you already are a holder of Mitel M7310N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mitel M7310N.
However, one of the most important roles played by the user manual is to help in solving problems with Mitel M7310N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mitel M7310N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
