Instruction/ maintenance manual of the product JAZZ-800 Miranda Camera Co
Go to page of 114
DENSITÉ series JAZZ-800 Universal Signal Processor Guide to Installation and Operation M874-9900-100 1 Aug 2007 Miranda Technologies Inc . 3499 Douglas-B.-Floreani St-Laurent, Québec, Ca nada H4S 1Y6 Tel. 514-333- 1772 Fax. 514-333-9828 www.miranda.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 Safety Compliance Information Safety Compliance This equipment complies with: - CSA C22.2 No. 60950-1-03 / Safet y of Information Techno logy Equipment, Including Electrical Busi ness Equipment.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 Table of Contents 1 JAZZ-800 Universal Signal Processor ...................................................................................... 1 1.1 Introduction ............................................
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 External Reference 2 Menu ...................................................................................................... ................. 87 External Reference 2 Menu ..............................
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 1 1 JAZZ-800 Universal Signal Processor 1.1 Introduction The JAZZ-800 brings lege ndary Teranex image quali t y to the Broadcasting world.
GUIDE TO INSTALLATION AND OPERATION 2 | JAZZ-800 1.2 Overview Filters and Algorithms PixelMotion™ De-interlacing PixelMotion de-interlacing of video originated mate ria l produces perfect prog ressive frames in preparation for further processi ng.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 3 Supported Format Conversions The JAZZ-800 support s the following format conversions: Input Output Input Output 480i59.94 480i59.94 576i50 576i50 720p59.94 720p50 1080i59.94 1080i50 720p59.94 480i59.94 720p50 576i50 720p59.
GUIDE TO INSTALLATION AND OPERATION 4 | JAZZ-800 Packages The JAZZ-800 is available in the followin g prod uct configurations: Single Channel Configurations (1 in Æ 1 out) JAZZ-810-P Single channel Up/Down/Cross co nverter & synch ronizer.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 5 Options These options are available for the JAZZ-80 0.: Options Channel Configuration Upgra d es JAZZ-810-UG-820 Upgrade from single cha nnel to 1½ Channels. JAZZ-810-UG-830 Upgrade from single cha nn el to Dual Channels.
GUIDE TO INSTALLATION AND OPERATION 6 | JAZZ-800 1.3 Applications Up-/Do wn-conversion In situations where the highest image quality up- or down-conversi on is necessary, Miranda’s JAZZ-800 uses pro.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 7 Frame-rate conversions generally invo lve changing the numb er of lines and fields (or fram es) per second in an image. Examples of standards conversions in clu de: 480i59.94 to 576i50 720p59.94 to 1080i50 1080i59.
GUIDE TO INSTALLATION AND OPERATION 8 | JAZZ-800 1.4 Quick Start Installation Getting assistance with the JAZZ-800 This manual will help in the operation of the Mirand a JAZZ-800. It provides an overview of features and procedures to acc o mpli sh all of the tasks this product can perf orm.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 9 2. Remove the Control Panel and place it on a flat, stable surface. 3. Remove the f oam insert that held the Control Panel.
GUIDE TO INSTALLATION AND OPERATION 10 | JAZZ-800 Attaching the Control Panel 5. On the re ar of the Control Panel, locate the mu lti-pin conne ctor and the three ball-pin conne ctors. 6. On the front of the JAZ Z-800 chas sis, locate th e multi-pin connector and the three ball-pin mating connecto rs.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 11 Control Panel.
GUIDE TO INSTALLATION AND OPERATION 12 | JAZZ-800 Control Panel Logic Note: Input/Output channel selection driv es the state of all other sections of the control panel and the MENUTREE. There are two primary states for t he control panel b utton/LED logic.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 13 Rear Panel.
GUIDE TO INSTALLATION AND OPERATION 14 | JAZZ-800 Setup Detail Enhance & Sharpness There is a known issue with the default setting for De tail Enhance & Sharpne ss that cause the output image to be soft. To correct this set the Detail Enhance slider to ‘0’ and the Sharpness s lider to ‘63’.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 15 2 Inst allation Rear Panel (From Left to Right) Standard Connections 1. PS1 – Mains input 1 a. 90-1 10V @ 60Hz / 200-220V @ 50Hz, Auto Detect 2. PS2 – Mains input 2 a. 90-1 10V @ 60Hz / 200-220V @ 50Hz, Auto Detect 3.
GUIDE TO INSTALLATION AND OPERATION 16 | JAZZ-800 Digital Video Input/Output & Refer ence Input 1. Referen ce Input 1 a. 1x BNC, SD analo g blackburst, HD tri- level sync (interlaced or progres sive) 2. Referen ce Input 2 a. 1x BNC, SD analo g blackburst, HD tri- level sync (interlaced or progres sive) 3.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 17 Analog & AES Audio Connection (NO TE: Requires Analog & AES Audio Option Boar d) 1. Analog Audio Input/Output a) High Density Molex LFH Connector 2.
GUIDE TO INSTALLATION AND OPERATION 18 | JAZZ-800 3 Operations This section describes the control panel for the JA ZZ-800 Universal Video Processo r. The pan el can o perate in one of two modes, local or remote. Local Control (Full) In the Local Control mode, the panel is physi cally mount ed to the JAZZ-800 frame and controls this one unit.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 19 • Bi-Color LED’s (Qty 49) o The LED’s are red, green, blue tri- color LED’s, wired as bi-col or o All LED’s in Section 6 to 10 are configured as bi-color LCD Display The JAZZ-800 Control Panel sup port s the following.
GUIDE TO INSTALLATION AND OPERATION 20 | JAZZ-800 Control Panel Logic Note: Section 1, Input/Output channel selection drives t he state of all other sectio ns of the co ntrol pan el and the MENUTREE. There are two primary states for t he control panel b utton/LED logic.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 21 Input/Output – Section 1 Input IN 1 (Button) – Allows the user to configure vid eo processing cha nnel 1 input.
GUIDE TO INSTALLATION AND OPERATION 22 | JAZZ-800 Output OUT 1 (Button) – Allows the user to config ure processing channel 1 output. The first press will place the system into the Active mode (solid.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 23 Video Select – Section 2 SDI 1 (Button) – Assigns the SDI 1 Input to the currently selected input ch annel or SDI 1 output to the currently selected output channel. After select ing, pre ss the ROTARY ENCODE R to accept.
GUIDE TO INSTALLATION AND OPERATION 24 | JAZZ-800 Format / Frame-rate Select – Section 3 480/576 (Button) – If an input channel is selected, on first pre ss the system sets the selected input to 480 lines. On second press, the input is set to 576 lines.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 25 50 (Button) - Sets the fra me rate of the currently selected input or output to 50Hz. After selecting, press the ROTARY ENCODER to ac cept.
GUIDE TO INSTALLATION AND OPERATION 26 | JAZZ-800 Aspect – Section 4 ANA (Button) - Sets the aspect ratio of the selected pro ces sing channel to Anamorphic.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 27 FLEX (Button) - Sets the aspect ratio o f the selected processi n g channel to Flexview. After selecting, press the ROTARY ENCODER to acc ept.
GUIDE TO INSTALLATION AND OPERATION 28 | JAZZ-800 Audio Select – Section 5 SDI 1 (Button) – Assigns the embed ded audio from the S DI 1 to the currently sele cted input or output channel.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 29 Graphical User Interface (GUI) and Menu Controls – Section 6 Display Controls (8 Buttons around display) - Assigned based on curre nt MENUTREE page .
GUIDE TO INSTALLATION AND OPERATION 30 | JAZZ-800 Vid Proc (Video Processing) – Section 7 VID LEV (Button) – Takes you to the VIDEO LEVEL control on the Proc Amp Menu of the M ENUTREE. The ROTARY ENCODER will then be used to adjust the VIDEO LEVEL.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 31 R-Y (Button) – Takes the user to the R-Y LEVEL control on the Proc Amp Menu of the MENUTREE. The ROTARY ENCODER will then be used to adjust the R-Y LEVEL.
GUIDE TO INSTALLATION AND OPERATION 32 | JAZZ-800 Logo / Presets – Section 8 TSG MENU (Button) – Takes the user t o the Video Test Generator Menu of the MENUT REE.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 33 Audio Active & System Status – Section 9 AUDIO STATUS (LED’s 1 – 16) – Shows the status of the audio cha nnels for the currentl y selected video processing channel.
GUIDE TO INSTALLATION AND OPERATION 34 | JAZZ-800 REF1 (LED) – Shows the status of the sign al on External Refe rence Input 1 LED Color State Mode Comments Red Flashing All Reference 1 and the outp .
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 35 Panel – Section 10 NOTE: REM/TALLY status has GPI interface (GPI pins 7 and 8) for ON-AIR indication PANL LOCK (Button) – Locks th e Local Control Panel. To activate the PANEL LO CK, press and hold t he button for 2 seconds.
GUIDE TO INSTALLATION AND OPERATION 36 | JAZZ-800 4 MENUTREE Main Menu The Main Menu is the top menu in the JAZZ-800 MENUTREE. It provides access to the top level functions in the MENUTREE.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 37 Video Menu • INPUT – Not functional / Future expansion • PROC – Takes the user to the Proc Amp Setting Menu • ENH – Allows the user to adj.
GUIDE TO INSTALLATION AND OPERATION 38 | JAZZ-800 Proc Amp Menu PROC – Takes the user to the Video Processing Am plifier Men u VIDEO – Adjust the VIDEO LEVEL for the selected video processing channel. To adjust, turn the ROTARY ENCODER on the cont rol panel.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 39 Proc Amp Menu (continued) HUE – Adjust the HUE PHASE for the selected video pr ocessing channel. To adjust, turn the ROTA RY ENCODER on the cont rol panel. Press the DEFAUL T soft button to go back to the default value.
GUIDE TO INSTALLATION AND OPERATION 40 | JAZZ-800 Proc Amp Menu (continued) R-Y – Adjust the R-Y LE VEL for the selected video processi ng channel. To adjust, turn the ROTARY ENCODER on the cont rol panel. Press the DEFAUL T soft button to go back to the default value.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 41 Proc Amp Menu (continued) RESET – Resets all PROC AMP LEVELS to their default values • YES – Will reset all proc amp levels (video gain, black level, hue, saturation, R-Y level, and B-Y level) back to their default values.
GUIDE TO INSTALLATION AND OPERATION 42 | JAZZ-800 Enhance ENH – Adjust the DETAIL ENHANCE setting for the sele cted vide o processing channel. To adjust, turn the ROTARY ENCODER on the control panel. Press the DE FAULT soft button to go back to the default value.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 43 Aspect Ratio Menu ASPECT – Takes the user to the Variable Aspect Rat io Conversion Menu • H SIZE – Not functional / Future expansion • V SIZE .
GUIDE TO INSTALLATION AND OPERATION 44 | JAZZ-800 Aspect Ratio Menu (con ti nued) H TRIM – Adjust the HORIZONTAL TRI M of the image fo r the selected video processing channel. To adj ust, turn the ROTARY ENCODER on the control pan el. Press the DEFAULT soft button to go back to the defa ult value.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 45 Aspect Ratio Menu (con ti nued) RESET – Resets all Variable Aspect Ratio settings to their default values • YES – Will reset all variable aspect ratio conver sion settings (H&V Size, H&V Position, and H&V Trim) back to their default values.
GUIDE TO INSTALLATION AND OPERATION 46 | JAZZ-800 Zoom/Crop Z/C – Enables ZOOM/CROP. This mode will zoom the image by 3-pixels/3-lines and then crop it by 3- pixels/3-lines. It is useful for eliminating edge e ffect caused by processing the edge s of the image.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 47 Test Generator Menu Test – Takes the user to the Video Test Generator Menu • CIR – Selects the Circle Test Pattern. • 75% – Selects the 75% Color Bars Test Pattern. • GRAY – Selects the Gray Field Test Pattern.
GUIDE TO INSTALLATION AND OPERATION 48 | JAZZ-800 Test Generator Menu (continued ) CIR – Selects the Circle Test Pattern. • ON – Turns ON the Circle Test Pattern on the output of the selected video processi ng channel. • OFF – Turns OFF the Circle Test Pattern on the output of the sele cted video processing cha nnel.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 49 Test Generator Menu (continued ) GRAY – Selects the Gray Field Test Pattern. • ON – Turns ON the Gray Field Test Pattern on the ou tput of the selected video processin g channel. • OFF – Turns OFF the Gray Field Test Pattern on the output of the selected vide o processing channel.
GUIDE TO INSTALLATION AND OPERATION 50 | JAZZ-800 Test Generator Menu (continued ) RGB – Selects the RGB Test Pattern. • ON – Turns ON the RGB Test Pattern on the output of the sele cted video processing chan nel. • OFF – Turns OFF the RGB Test Pattern on the output of the selected video processi ng channel.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 51 Audio Menu AUDIO – Takes the user to the Audio menu • LEVEL – Takes the user to the Audio Level adjustment menu • PHASE – Takes the user to .
GUIDE TO INSTALLATION AND OPERATION 52 | JAZZ-800 Audio Level Menu LEVEL – Allows the user to adjust the AUDIO LEVEL for each audio channel in the currentl y selected video processing channel.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 53 Audio Level Adjustment – by Audio Groups • 1 – Adjusts the audio level for the channels in G roup 1 (channels 1 – 4) • 2 – Adjusts the aud.
GUIDE TO INSTALLATION AND OPERATION 54 | JAZZ-800 Audio Level Adjustment – by Audio Pairs • 1/2 – Adjusts the audio level for the channel s in Pair 1/2 (channels 1 & 2) • 3/4 – Adjusts t.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 55 Audio Level Adjustment – by Audio Channels • 1 – Adjusts the audio level for channel 1 • 2 – Adjusts the audio level for channel 2 • 3 –.
GUIDE TO INSTALLATION AND OPERATION 56 | JAZZ-800 Audio Level Adjustment – by Audio Channels (continued ) • 8 – Adjusts the audio level for channel 8 • 9 – Adjusts the audio level for channe.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 57 Audio Level Adjustment – by Audio Channels (continued ) • 15 – Adjusts the audio level for chan nel 15 • 16 – Adjusts the audio level for chan nel 16 Audio Level (Channels 15-16) – Adjusts the audio l evel of the individual ch annels.
GUIDE TO INSTALLATION AND OPERATION 58 | JAZZ-800 Audio Phase Menu PHASE – Allows the user to adjust the audio phase for each a udio channel in the curre ntly selected video processing channel. Audio Phase Adjustment – All Chann e ls ALL – Adjusts the audio p hase on all audio channels in the cu rre ntly selected video processing cha nnel.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 59 Audio Phase Adjustment – by Audio Groups • 1 – Adjusts the audio phase for the ch annels in Group 1 (cha nnels 1 – 4) • 2 – Adjusts the au.
GUIDE TO INSTALLATION AND OPERATION 60 | JAZZ-800 Audio Phase Adjustment – by Audio Pairs • 1/2 – Adjusts the audio phase for the cha nnel s in Pair 1/2 (channels 1 & 2) • 3/4 – Adjusts .
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 61 Audio Phase Adjustment – by Audio Channels • 1 – Adjusts the audio phase for ch annel 1 • 2 – Adjusts the audio phase for ch annel 2 • 3 .
GUIDE TO INSTALLATION AND OPERATION 62 | JAZZ-800 Audio Phase Adjustment – by Audio Channels (co ntinued) • 8 – Adjusts the audio phase for ch annel 8 • 9 – Adjusts the audio phase for ch an.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 63 Audio Phase Adjustment – by Audio Channels (co ntinued) • 15 – Adjusts the audio phase for channel 15 • 16 – Adjusts the audio phase for channel 16 Audio Phase (Channels (15-16)) – Adjusts the audi o phase of the individual channels.
GUIDE TO INSTALLATION AND OPERATION 64 | JAZZ-800 Audio Delay Menu DELAY – Takes the user to audio d elay menu. • AUTO – Selects the Auto delay mode.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 65 Audio Delay Menu (continued) MANUAL – Allows the audio to be manually adjusted. • Audio Delay (uS) – Takes the user to the micro se co nd adjust.
GUIDE TO INSTALLATION AND OPERATION 66 | JAZZ-800 Audio Delay Menu (continued) Audio Delay (mS) – Adjusts the audi o delay in the curre nt ly selected video processing channel in millisecond increment s. To adjust, turn the rotary enc oder on the control panel.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 67 Audio Test Menu 750Hz – Enables a 750Hz audio ton e for the selected audio cha nne l(s) 1.5KHz - Enables a 1.
GUIDE TO INSTALLATION AND OPERATION 68 | JAZZ-800 Audio Test Tone – by Audio Groups • 1 – Enables the selected audio test tone for the cha nnels in Group 1 (chann els 1 – 4) • 2 – Enables .
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 69 Audio Test Tones – by Audio Pairs • 1/2 – Enables the selected audio te st tone for the ch an nels in Pair 1/2 (channels 1 & 2) • 3/4 – .
GUIDE TO INSTALLATION AND OPERATION 70 | JAZZ-800 Audio Test Tones – by Audio Chan ne ls • 1 – Enables the selected audio test tone for cha nnel 1 • 2 – Enables the selected audio test tone .
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 71 Audio Test Tones – by Audio Chan ne ls (continued) • 8 – Enables the selected audio test tone for cha nnel 8 • 9 – Enables the selected audi.
GUIDE TO INSTALLATION AND OPERATION 72 | JAZZ-800 Audio Test Tones – by Audio Chan ne ls (continued) • 15 – Enables the selected audio te st tone for ch annel 15 • 16 – Enables the selected audio te st tone for ch annel 16 Audio Test Tone (Channels 15-16 ) – Enables the selected audio test tone for the sele cted channel.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 73 Advanced Menu ADV – Takes the user to the Advanced menu • NR – Takes the user to the Noise Re duction menu • SOURCE – Takes the user to the .
GUIDE TO INSTALLATION AND OPERATION 74 | JAZZ-800 Noise Reduction Menu NR – Takes the user to the Noise Re duction Menu The Noise Reducer is a motion adapti ve temporal recu rsive filter that works well in removing ra ndom and Gaussian noise. Ea ch pixel is labeled as m otion, no mo tion, or noise.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 75 Noise Reduction Menu (continued ) NR Bias – Adjusts the Noise Reduction Bias level. To adjust, turn the rotary encoder on the front panel. • The range of adjustment is -6dB to +6dB. • The default setting is 0dB.
GUIDE TO INSTALLATION AND OPERATION 76 | JAZZ-800 Noise Reduction Menu (continued ) RED – Enables/Disable s the noi se reduction Red overlay • ON – Enables the Noise Reduction, Re d Overlay. In this mode, pixels that are interpreted as in motion will be colored red.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 77 Source Menu SOURCE – Takes the u ser to the Source Menu • Auto - Select this mode if the source material is a mixture of film and video. This mode select s a compromise algorithm tha t will look for film- and video-based material.
GUIDE TO INSTALLATION AND OPERATION 78 | JAZZ-800 Aperture Menu APER – Takes the user to the Aperture Menu When performing a frame rate conversi on, the interpolation aperture is us ed to set the characteristics of the filter used to create the synthetic information in a frame ra te conversion.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 79 Preset Menu PRESET – Allows the user to save and recall system se ttings to system memory . The PRESETS will capture all current settings for the system. • PRESET1 • PRESET2 • PRESET3 • PRESET4 • PRESET5 • PRESET6 • DEFAULT – The DEFAULT PRESET is used as t he power-on PRESET.
GUIDE TO INSTALLATION AND OPERATION 80 | JAZZ-800 Preset Menu (continued) PRESET1 – Saves the current system settings to PR ESET1 or Recalls the stored values from PRESET1 RECALL – Recalls the use.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 81 5 Configuration Set-up Menu – Page 1 SETUP – Takes the user to the SETUP menu • REF 1 – Takes the user to the External Reference 1 Menu • RE.
GUIDE TO INSTALLATION AND OPERATION 82 | JAZZ-800 External Reference 1 Menu REF 1 – Takes the user to the External Reference 1 Menu • INPUT – Selects the current input video source as the refere.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 83 External Reference 1 Menu (continue d) Black – Sets analog blackburst as the re ference for video processing chann el 1. • PIXEL - Adjusts the Pixel timing of the output re lative to the analog blackburst referen ce fo r video processing channel 1.
GUIDE TO INSTALLATION AND OPERATION 84 | JAZZ-800 External Reference 1 Menu (continue d) LINE - Adjusts the Line timing of the output relative to the analog blackbu rst reference for video processing channel 1. To adjust, turn the rotary encoder o n the control panel.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 85 External Reference 1 Menu (continue d) TRI-I – Sets HD tri-level sync (interlace d) as the reference for video pro cessing channel 1. • PIXEL - Adjusts the Pixel timing of the output relative to the HD tri-level sync (interlaced) reference for video processing channel 1.
GUIDE TO INSTALLATION AND OPERATION 86 | JAZZ-800 External Reference 1 Menu (continue d) LINE - Adjusts the Line timing of the output relative to the HD tri-level sync (interlaced) reference for video processing channel 1. To adjust, turn the rotary en coder on the control panel.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 87 External Reference 1 Menu (continue d) PIXEL - Adjusts the Pixel timing of the output relative to the HD tri-level sync (progressive) reference for video processing channel 1. To adjust, turn the rotary encoder on the control panel.
GUIDE TO INSTALLATION AND OPERATION 88 | JAZZ-800 External Reference 2 Menu REF 2 – Takes the user to the External Reference 2 Menu Note: Refer to External Reference 1 Menu (page 77 ) for details.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 89 Ancillary Data Menu ANC – Takes the user to the Ancillary Data Menu • TC – Takes the user to the Timecode M enu • CC – Takes the user to the.
GUIDE TO INSTALLATION AND OPERATION 90 | JAZZ-800 Timecode Menu TC – Takes the user to the Timecode M enu • TC OUT – Selects the line on which time code will be inserted in an SD output. • TC GEN – Not functional / Future expansion TC OUT – Selects the line on which time code will be inserted in an SD output.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 91 Closed Caption Menu CC – Takes the user to the Closed Capti on menu • HD IN • HD OUT • DET FLD 2 • CC – Enab les Closed C aption suppo rt HD IN – Used to select the location of the closed ca ption information in the incoming HD signal.
GUIDE TO INSTALLATION AND OPERATION 92 | JAZZ-800 Closed Caption Menu (continued ) HD OUT - Used to select the location for inse rting the closed caption information in the output HD signal. To adjust, turn the rotary encoder on the control pan el. Pr ess the DEFAULT soft button to go back to the default value.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 93 Closed Caption Menu (continued ) CC – Enables C losed Caption process ing • ON – Enables Closed Cap tion support • OFF – Disables Closed Ca .
GUIDE TO INSTALLATION AND OPERATION 94 | JAZZ-800 Setup Menu – Page 2 MORE – Takes the user to additional Setup menus • KEY – Used to enter the System Access Key • DISPLAY – Not functional.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 95 Key (License Key) Menu KEY – Used to enter the “Access” or License Key to configure the JAZZ-800 for the purcha sed features and options.
GUIDE TO INSTALLATION AND OPERATION 96 | JAZZ-800 Remote IP Address Menu RMT IP – Used to enter the IP address of the chassi s that you wish to connect to with a remote control panel.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 97 IP Address Menu IP – Set the IP address for the JAZZ-800 chassis • DHCP – Assign an IP address to the JA ZZ-8 00 chassis using Dyna mic Host Con.
GUIDE TO INSTALLATION AND OPERATION 98 | JAZZ-800 IP Address Menu (continued) STATIC IP – Allows the IP address of the JAZZ-800 chassis to be manually entered • LEFT – Moves the cursor left, one.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 99 Control Panel IP Address Menu PNL IP – Set the IP address for the JAZZ-800 Local Control Panel • DHCP – Assign an IP address to the JA ZZ-8 00 L.
GUIDE TO INSTALLATION AND OPERATION 100 | JAZZ-800 Control Panel IP Address Menu (continued ) STATIC IP – Allows the IP address of the JAZZ-800 Local Control Panel to be manually entered • LEFT .
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 101 6 System Messages System Messages – Non-critical Alerts A non-critical system fault indicating t hat there is a problem with one or more of the internal fans. A non-critical system fault indicating that there is a temperature problem in the chassis.
GUIDE TO INSTALLATION AND OPERATION 102 | JAZZ-800 System Message – Critical Alerts A critical system fault indicating that there is a problem with the communication between t he Audio option board and the main cha ssis.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 103 A critical system fault indicating that the re is a problem with the internal temperature of the chassis. A critical system fault indicating that there is a problem with the communication between t he Video option board and the main chassis .
GUIDE TO INSTALLATION AND OPERATION 104 | JAZZ-800 7 S pecifications VIDEO INPUT SD- & HD-SDI Input (2): • SD/HD-SDI, 10-bit serial digital input at 270Mb/s per SMPTE-259-C or 20-bit serial digi tal input at 1.485Gb/s per SMPTE 29 2-1997, SD audio embe dding per SMPTE 272M or HD audio embeddin g per SMPTE-299 • Formats SD: 480i59.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 105 PROCESSING FEATURES Video Proc Amp • Video gain – adjustable +/- 6dB, default = 0 • Black Level – adjustable +/- 30mV, defa ult = 0 • Hue .
GUIDE TO INSTALLATION AND OPERATION 106 | JAZZ-800 Delay • The processing delay for all application is 4 frames. • The JAZZ-800 has the abil ity to adjust the audi o delay from -100mS to +5 seconds .
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 107 Appendix A – Cable & Pin-out s Analog Audio I/O Break-Out Cable Connecto r: Molex LFH LFH Pos Signal Description XLR (Female) LFH Pos Signal De.
GUIDE TO INSTALLATION AND OPERATION 108 | JAZZ-800 AES Audio I/O Break-Out Cable (Balanced) Connecto r: Molex LFH LFH Pos Signal Description XLR (Female) LFH Pos Signal Description XLR (Male) 1 Channe.
GUIDE TO INSTALLATION AND OPERATION JAZZ-800 | 109 AES Audio I/O Cable (Unbalanced) Connector: Molex LFH Mtx 50 LFH Pos Signal Description BNC Connecto r LFH Pos Signal Description BNC Connecto r 1 Ch.
GUIDE TO INSTALLATION AND OPERATION 110 | JAZZ-800 Appendix B – Preset Files The following table details the param ete rs that are captured in the user presets.
An important point after buying a device Miranda Camera Co JAZZ-800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Miranda Camera Co JAZZ-800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Miranda Camera Co JAZZ-800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Miranda Camera Co JAZZ-800 you will learn all the available features of the product, as well as information on its operation. The information that you get Miranda Camera Co JAZZ-800 will certainly help you make a decision on the purchase.
If you already are a holder of Miranda Camera Co JAZZ-800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Miranda Camera Co JAZZ-800.
However, one of the most important roles played by the user manual is to help in solving problems with Miranda Camera Co JAZZ-800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Miranda Camera Co JAZZ-800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
