Instruction/ maintenance manual of the product CN3101e Minolta
Go to page of 208
Printer Controller CN3101e User Man ual Printer Controller CN3101e User Manual 2002. 6 4334-7704-02 Copyright 2002 MINOLTA CO., LTD. The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers.
i Welcome This User Manual e xplains the functions and operations of the p rinter controller model CN3 101e for t he Minolta di gital color copier CF20 02/CF310 2. T o ensure that the controller is used correctly , first read this manual carefully and thoroug hly; then, keep it close at hand so yo u can refer to it whene v er it becomes necessary .
Welcome ii Precautions f or Using the Controller Heading Pr ecautions Fo r the U .S.A. Users FCC P art 15-Ra dio Frequenc y De vices This de vice complies wit h Part 15 of the FCC Rules .
Welcome iii Fo r Canada Users Interference-Cau sing Equipment Standard (ICES-003 Issue 3) This Class A digital appara tus comp lies with Canadian ICES-003 .
Welcome iv Fo r users in countries not subject to Class B reg ulations WA R N I N G This is a Class A pro duct. In a domestic en vironment this product may cause radio interferenc e in which case the user m ay be required to take adequate measures.
Welcome v Product Over view The CN3101e controller is optional equipment used for adding printer , scan ner and networ k functions to the CF20 02/CF3102 cop ier .
vi Contents Welc ome About This Manual ............. ................. ................. ........... i Naming of Equip ment ............... ................. ................. ..... i Precautions for Using the C ontroller .............. ..............
Contents vii Advanced Operations 6. Printi ng 6.1 Device Option Setting ............. ................. ................. 47 6.2 Using Easy Set ................... ................. ................. ..... 47 6.3 Displaying Page Layout and Printer Figure .
Contents viii Internet Fax Reception ........ ................. ................. ..... 105 7.7 The Operation of Capturing Images by TWAIN ...... 106 Installing the TWAIN Dr iver ......... ................. ........... 106 Controller Setting .........
1 1. Befo re Usin g the Contr oller 1.1 Operating En vir onment Operating En v i r o nment The printer contr oller operates under the follo wing en vironment.
1. Before Using the Cont roller 2 NO TES • Be sur e to r ead the lates t information (Readme.txt) that contains im port ant informatio n. • T o use the Stor e to HDD, Scan to HDD, and Distribution functions, it is necessary that the optional HDD be mounted on the copier .
3 Setup.
4.
5 2. Conn ecti ng th e Cab le Make the cable connection between the PC and the contro ller by using the appropriate cable fo r the specif ic connection scheme used. If the copi er is to be used in st and-alone en vironment, us e the IEEE1284 (Centronics) or USB cable.
2. Connecting the Cab le 6.
7 3. S ettings Requ ired f or Loca l Co nnecti on T o make a local connection between the PC and printer controller , make the settings by fo llow ing the proced ures gi ven belo w . 3.1 Installing the Printer Driver F or W indows 98, 98SE and Me: The follo wing procedure applies to the installation of the printer driv er for W indo ws 98.
3. Settings Required for Local Connection 8 5. A windo w will appear , prompting you to select the manufactu rer and model o f your printer . Click the “Have Disk..” button on the lo wer right part of the screen. 6. The “Install From Disk” dialog box will appear .
3. Settings Required for Local Connection 9 9. A windo w that prompts y ou to select the port will ap pear . Select “EPUSB1” if the conn ection is m ade th rou gh the USB cable and “LPT 1” if the connection is made through the IEEE1284 cable. Then, click the “Ne x t>” button.
3. Settings Required for Local Connection 10 12. Installation will complete. When all the f iles ha v e b een copied from the CD-R OM, the corresponding icon will be added to the “Printers” windo w .
3. Settings Required for Local Connection 11 F or W indows 2000, NT 4.0, an d XP: The follo wing procedure applies to the installation of the printer driv er for W indo ws 2000. Note that d iffer ent names are used f or the W indows NT us ers and dif ferent cont ents of di splays are g iv en fo r the W indows XP u sers.
3. Settings Required for Local Connection 12 6. A windo w will appear , prompting you to select the manufactu rer and model o f your printer . Click the “Have Disk..” button on the lo wer right part of the screen. 7. The “Install From Disk” dialog box will appear .
3. Settings Required for Local Connection 13 9. A “Printers” lis t will ap pear . Select the printer dri ver to be installed and click the “Ne xt>” button. 10. A windo w that asks you to confirm the printer name will appear . Check the printer name.
3. Settings Required for Local Connection 14 13. As the last step, click the “Finish” button. 14. Installation will complete. When all the f iles ha v e b een copied from the CD-R OM, the corresponding icon will be added to the “Printers” windo w .
3. Settings Required for Local Connection 15 Installation thr ough Plug and Pl ay If the local connection (IEEE12 84 or USB) is made between the PC and the cop ier , the printer dri ver can be installed th rough the “Plug and Play” f unction. For details of ho w to install the print er dr iver , see “3.
3. Settings Required for Local Connection 16 • W indow s 2000 and X P: 1. Connect the USB cable to the copier an d PC with the Power Switch ON. 2. The installation of the prin ter driver through Plug and Play is au tomatically started on the PC. 3. Install the printer d riv er according as instructed b y the “ Add New Hardw are W izard.
17 4. S ettin gs Requ ired for Ne twor k Prin ting This chapt er explai ns the setti ngs that need to be made for netw ork printing. Make the n ecessary s ettings fo r netw ork printing b y following the pr ocedu res g i ven belo w . 1. Referring to “3.
4. Settings Required for Network Printing 18 4.2 T o Mak e the Settings on the Controller Side Network settings on the controller side may be made either from the copier control panel or th rough P ageScope Li ght used on a PC co nnected to the network.
4. Settings Required for Network Printing 19 ■ Accessing P ageScope Light PageScop e Light can be accessed directly u sing a W eb bro wser . 1. Start the W eb b ro wser . 2. T ype the IP addr ess of the controller as follows in th e address box and p ress the Enter key .
4. Settings Required for Network Printing 20 4.3 Windo ws Printing Setting The use of W indo ws Printing enables direct printing ov er the Microsof t network . NO TE T o make the W indow s Prin ting setting, it is necessary to insta ll the NetBEUI pr otocol in t he PC.
4. Settings Required for Network Printing 21 Settings mad e on the Prin ter Driver side • W indow s 98, 98SE and Me: 1. Click the “Start” b utton and, from the menu that will then appear , select “Settings” – “Printers.” Select the icon of the printer that has been installed; then, right-click it and choose “Proper ties.
4. Settings Required for Network Printing 22 4.4 Settings for Printing thr ough LPR The follo wing explain ho w to make settings for printin g through LPR in different OSs. Settings m ade on the c ontr oller side Set the IP address in the co ntroller .
4. Settings Required for Network Printing 23 4.5 Settings for Printing using IPP Settings m ade on the c ontr oller side If IPP (Internet Printing Protocol) is used, make the following settings on PageS cope Light. (P rinting can b e done with th e default settings.
4. Settings Required for Network Printing 24 Furthermore, make settings as they relate to IPP printin g. 1. Click the “Print” tab and then s elect “IPP .” 2. Make the following settings. Printer Name : Set the printer name. Setting v alue : 127 alphanum eric characters or less Printer Location : Set the installed si te of the printer .
4. Settings Required for Network Printing 25 Settings mad e on the Prin ter Driver side • W indow s 2000 and X P: 1. Click the “Start” b utton and, from the menu that will then appear , select “Settings” – “Printers.” Start the printer addition wizard and s elect “Network printer .
4. Settings Required for Network Printing 26 4.6 Print Service Setting in NetW are ■ Prin t sett ings o n the P C from wh ich p rinti ng is e ffect ed The contro ller supports the follo wing en vironment. ■ NetW are Serv er Setting Pr ocedur e • NetW are 3.
4. Settings Required for Network Printing 27 16. S elect “Queues Serviced b y Printer” and press “En ter .” 17. S elect “CN3101e” created in s tep 12 from the “Def ined printer” list and press “Enter .” 18. Press “Insert” to display the “ A vailable Queue” list of the printer .
4. Settings Required for Network Printing 28 connected in the acti ve connection column..
4. Settings Required for Network Printing 29 • NetW are 3. 2 remote pr inter mode settings 1. Log on to the NetW are server , in which PServer is to be re gistered, by the Sup ervis or r ight. 2. Star t Pconsol e . 3. Select “Print Queue Information ” from “ A vailable Option s” and then press “Enter .
4. Settings Required for Network Printing 30 22. Using PageS cope Light , set the cont roller as de tailed belo w and restart i t. Details of Setting: Enable NetW are : Enable Frame T ype : Auto Detect (Select the frame type according to the network en vironment.
4. Settings Required for Network Printing 31 • NetW are 4.x NDS prin t ser ver mode settings 1. Log on t o the NDS T ree by the Administrator r ight. 2. Start NW ADMIN. 3. Select the container object, either Or ganization or Organ izational Unit, that of fers the print serv ice and select “Print Service Quick Setup” fro m the tool menu.
4. Settings Required for Network Printing 32 Print Server Password : ( Set o nly when the password is set on the NetW are serv er side.) Preferred NDS Conte xt : Name of the conte xt to which PServe r is connected Preferred NDS T ree : Name of the tree to which PServer logs on Print Queue Scan Rate : 1 (Change as necessary .
4. Settings Required for Network Printing 33 • NetW are 4.x NDS r emote p rinter mode settings 1. Log on t o the NDS T ree by the Administrator r ight. 2. Start NW ADMIN. 3. Select the container object, either Or ganization or Organ izational Unit, that of fers the print serv ice and select “Print Service Quick Setup” fro m the tool menu.
4. Settings Required for Network Printing 34 Print Server Password : ( Set o nly when the password is set on the NetW are serv er side.) Preferred NDS Conte xt : Name of the conte xt in which PServe r is loaded Preferred NDS T ree : Name of the tree in which PServer is load ed Print Queue Scan Rate : 1 (Change as necessary .
4. Settings Required for Network Printing 35 • NetW are 5.x NDS prin t ser ver mode settings * T o use the p rint serv er mode, it is necessary that the IPX protoco l ha ve been loaded in the NetW are server . 1. Log on t o the NDS T ree by the Administrator r ight.
4. Settings Required for Network Printing 36 Print Server Password : ( Set o nly when the password is set on the NetW are serv er side.) Preferred NDS Conte xt : Name of the conte xt to which PServe r is connected Preferred NDS T ree : Name of the tree to which PServer logs on Print Queue Scan Rate : 1 (Change as necessary .
4. Settings Required for Network Printing 37 • NetW are 5.x Novell Distributed Print Service (NDPS) setting s * Before making settings for NDPS , make sure that the NDPS Broker and NDPS Manager ha ve been created and loaded.
4. Settings Required for Network Printing 38 10. S et the IP address set in th e controller for the hos t address, type “Print” in “Printer name,” and press “Finish ” to v alidate the settings. 11. The printer dri ver registration screen will then appear .
4. Settings Required for Network Printing 39 • Client Prin t Settin g Click “Star t” – “Settings” – “Printers” and then dou ble-clic k the “ Add Printer” icon. Refer to the network in the destination port setting and specify the queu e name pre viously created (NDPS printer n ame).
4. Settings Required for Network Printing 40 4.7 Operation Chec ks after Installation of Driver T est Printing from Client PC A test pag e is printed to ch eck to see if th e printer driv er has been prop erly installed. 1. Click the “Start” b utton and, from the menu that will then appear , select “Settings” – “Printers.
41.
5. Unin stalling the Drive r 42 5. Unin st alling th e Driver 5.1 Uninstalling the Driver 1. Click the “Start” b utton and, from the menu that will then appear , select “Settings” – “Printers.” 2. Click the icon of the pr int er to be deleted .
43 Advanced Operations.
44.
45 6. Printin g This chapter e xplains printing o perations that can be set from the printer dri ver . How to Dis play the Printer Driver Pr operty Sheet There are two a pproaches av ailable for use to display the p roperty sheet. (Each of fers dif ferent ranges of settings that can be incorporated.
6. Prin ting 46 Follo wi ng giv e an ov erview of each function a vailable f rom diff erent tabs. For details of th e “Job Management” tabs, see “8. Job Managem ent.” ☞ p.121 T ab Name Function Name Description Setup N-up Print two or more pa ges on a sheet of paper .
6. Printing 47 6.1 Device Option Setting Options installed on th e copier are enabled from the pr int er dri ver . Setting Procedure 1. Start the printer d riv er and select the “Dev ice Option Setting” tab . 2. From the “Installable Op tions” list, select the device to be installed and click the “A d d ” b u t t o n .
6. Prin ting 48 6.3 Displaying Page Lay out and Printer Figu r e • Page Lay out sho ws a simpli fied i mage of a printed page. • Printer Figure sho ws the devices mo unted on the cop ier . MEMO P age Layout allows you to check how a print ed page will look like before actually printin g it.
6. Printing 49 6.4 Effecting N-up Printing N-up pr inting refers to the func tion that pri nts a docu ment consist ing of tw o or more pages on a sheet of paper . It comes in handy f or prin ting a lar ge v ol ume of data and reducing the number of printed page s.
6. Prin ting 50 6.5 Printing Pages with W atermarks Specific te xt is printed in the background. Setting Procedure 1. Select the “Setup” tab . 2. From the li st of “W atermark,” select the desired te xt to be put i n the backgro und as a watermark.
6. Printing 51 Editing the W atermark Clicking “Edit W atermark” will allow you to edit the font and position of the wate rm ar k. (1) Pre view Disp lays th e pr int i mage. (2) W atermark text Select the desired watermark from the list of existing watermarks.
6. Prin ting 52 Details Setti ng (1) Name T ype the name o f the ne w watermark ( consisting of up to 20 char acters). (2) Stri ng T ype the ch aracter string to be printed as the watermark (consisting of up to 127 characters). (3) T ype Face Select the font of the w atermark from am ong the fonts ins talled in the PC.
6. Printing 53 (8) Angle: Specify the angle of char acters with reference to the pap er . • Fix ed Angle : Standard f ixed angle pro vided b y the printer dri ver . Setting v alues: Horizontal, Diagonal, V ertical, User Setting • User Setting : When User Setting is selected fo r Fix ed Angle, you can set an arbitrary ang le.
6. Prin ting 54 6.6 Effecting Duplex/Booklet P rinting A document can be printed onto both si des of a sheet of paper or into a bookle t format (two f acing pages). This functio n can be used only when the copier is equipped with an Automatic Duplex Unit.
6. Printing 55 6.7 Effecting Staple The Staple function can be used only when the copier is equipp ed with the Finisher FN-8 or FN- 116. 1. Select the “Setup” tab . 2. Clicking “Detail of Output Setting” will open a dialog box for setting details .
6. Prin ting 56 6.8 Effecting Folding Folding is used in combination with Booklet to produce a booklet through center folding and cen ter stapling. It can be used only when the cop ier is equipped with the Finisher FN-8. Setting Procedure 1. Select the “Setup” tab .
6. Printing 57 6.9 Effecting Hole Punch The Hole Punch fun ction can be used only when the co pier is equipped with the Finisher FN-8 . Setting Procedure 1. Select the “Setup” tab . 2. Clicking “Detail of Output Setting” will open a dialog box for setting details .
6. Prin ting 58 6.10 Add ing a Cover or Interleaf A front co ver an d/or a back co ver can b e added to each of your copy sets. When printing on s heets of OHP transparencies, an interleaf can also be inserted between sheets of OHP trans parencies. Setting Procedure 1.
6. Printing 59 6.11 Prin t to Suit the Paper Size The image on the document created with an application can be enlar ged or reduced when printing accor ding to the paper size. Setting Procedure 1. Select the “Paper” tab . 2. Check that “Original Document Size” rep resents the size of the document created with the application.
6. Prin ting 60 6.12 Prin ting on Paper fr om Manual B ypass T ray The Manual Bypas s T ray can be selected as the paper source for p rinting. 1. Select the “Setup” tab . 2. Select “Manual Feed T ray” from the “Pap er Source” list. 3. Click “OK” twice to send the job .
61 7. Sett ings and Operati ons for Sc an Func tions This chapter explains ho w to make settings for and operate the scan functio ns that become usable when the controller is added.
7. Settings and Operations for Scan F unctions 62 7.1 Scan Settings (Basic Settin gs) Make the basic settings for scan funct ions. Setting from PageScope Li ght 1. Start P a geS cop e Light. 2. Enter th e password an d log on t o the Adminis trator mode .
7. S ettings and Oper ation s for S can Fun ctions 63 URL Notif ication URL Notification notifies, b y means o f e-mail, in formation on the location, in which scanned da ta created through a scan function is stored . The scanned data is not attached to the e-mail message.
7. Settings and Operations for Scan F unctions 64 7.2 Scan to PC Scan to PC is the function that transmits image data scanned by the cop ier to the PC using FTP . It is necessary that the FTP serv er application be started o n the PC side. 1. Using P ageScope Li ght, make the settin g for One-T ouch K ey Re gistrat ion or One T i me Re gistration.
7. S ettings and Oper ation s for S can Fun ctions 65 Setting the FTP A pplication It is the function that trans m its data using following settings of FTP .
7. Settings and Operations for Scan F unctions 66 Scan Operation Y ou ha ve the ch oice of two scan o perating procedures a vailable selected accordin g to whether the one-touch key is used to specify the destination or one ti me key is used. ■ Specifyi ng the desti nation using a one-touch k ey: 1.
7. S ettings and Oper ation s for S can Fun ctions 67 Details of Scan Operation Settings ■ Setting the S canning Mode 1. Press the Scan k ey on the copier . 2. Select the “Scan Mode” tab . 3. Set the fo ll o wing ite m s . Scan Size : Set the scanning si ze for the document.
7. Settings and Operations for Scan F unctions 68 ■ Sett ing C heck s It is possible to check the details of sett ings on the copier control panel. • Select the “Mode Check” ke y .
7. S ettings and Oper ation s for S can Fun ctions 69 7.3 Scan to FTP Server Scan to FTP Server is the function that transmits image data scanned b y the copier to the FTP server . 1. Using P ageScope Ligh t, re gister the F TP server s (up to f iv e).
7. Settings and Operations for Scan F unctions 70 5. Press the Start k ey on the copier . This lets the copier scan the do cument and send the scanned data to the FTP server . If the URL notif ication party has been specif ied, the inform ation on the location, in which scanned data is stored, is transmitted by e-mail.
7. S ettings and Oper ation s for S can Fun ctions 71 4. When an empt y f ield, in wh ich no FTP server s ha ve pre viously been r egis tered, is selected, it will bring you to a server registration screen. 5. Set the fo ll o wing ite m s . IP Address : Specify the IP addres s of the FTP serv er .
7. Settings and Operations for Scan F unctions 72 External Server Link : Set “Enable” and double- click the IP ad dress o f the FTP di sp la yed o n t h e ser v er link screen , which w ill access the FTP serv er . The serv er link screen can be displayed by selecting “Filing” – “External Server Link .
7. S ettings and Oper ation s for S can Fun ctions 73 Setting the Proxy Serv e r Make the follo wing settings to use the proxy server . Setting from PageScope Li ght 1. Start P a geS cop e Light. 2. Enter th e password an d log on t o the Adminis trator mode .
7. Settings and Operations for Scan F unctions 74 Scan Operation Y ou ha ve the ch oice of two scan o perating procedures a vailable selected accordin g to whether the one-touch key is used to specify the destination or one ti me key is used. ■ Specifyi ng the desti nation using a one-touch k ey: 1.
7. S ettings and Oper ation s for S can Fun ctions 75 Details of Scan Operation Settings ■ Setting the S canning Mode 1. Press the Scan k ey on the copier . 2. Select the “Scan Mode” tab . 3. Set the fo ll o wing ite m s . Scan Size : Set the scanning si ze for the document.
7. Settings and Operations for Scan F unctions 76 ■ URL Notif ication This function notifies the informatio n on the location, in which scanned d ata is stor e d, by e- mai l.
7. S ettings and Oper ation s for S can Fun ctions 77 7.4 Scan to HDD Scan to HDD is the fun ction that sa ves image data s canned b y the copier in the us er directory of the hard disk bu ilt in the copier . The image data s ave d in the hard disk can be do wnloaded to t he P C usi ng P ageSc ope Lig ht.
7. Settings and Operations for Scan F unctions 78 MEMO Even if URL N otif ic a tio n h as not b een s e t du ri ng O ne-T ouc h Ke y Re gist r ation or One T ime Re g ist ration on P ageScope Light, it is poss ibl e to specify the URL Notification party fr om the copier contr ol panel.
7. S ettings and Oper ation s for S can Fun ctions 79 • “Public directory” and “user directory” The “directory nam e” can be freely assign ed for “User Directory”.
7. Settings and Operations for Scan F unctions 80 Scan Operation Y ou ha ve the ch oice of two scan o perating procedures a vailable selected accordin g to whether the one-touch key is used to specify the destination or one ti me key is used. ■ Specifyi ng the desti nation using a one-touch k ey: 1.
7. S ettings and Oper ation s for S can Fun ctions 81 Details of Scan Operation Settings ■ Setting the S canning Mode 1. Press the Scan k ey on the copier . 2. Select the “Scan Mode” tab . 3. Set the fo ll o wing ite m s . Scan Size : Set the scanning si ze for the document.
7. Settings and Operations for Scan F unctions 82 ■ URL Notif ication This function notifies the informatio n on the location, in which scanned d ata is stor e d, by e- mai l.
7. S ettings and Oper ation s for S can Fun ctions 83 Downloadin g Scanned Data from the Hard Disk Start P ageScope Ligh t and do wnload the scan ned data. 1. Start P a geS cop e Light. 2. Select “File” – “HDD Directories.” 3. Click the specif ied user directory or PUBLIC.
7. Settings and Operations for Scan F unctions 84 5. A list of files stored is displayed. Select the specifi c file to be do wnloaded and click the “ Acquire Selected File” button. Data list screen File Name : Displays the name of the file stored in the user directory .
7. S ettings and Oper ation s for S can Fun ctions 85 6. Foll o w these procedur es to acquir e the scanned d ata from P ageScope Ligh t. Fo r TIFF and PDF f ormat 1. It opens “Do wnloading f iles...” dialog bo x. 2. Specify the place in which th e files can be do wnloaded, then click “OK” butto n.
7. Settings and Operations for Scan F unctions 86 7.5 Scan to E-mail Scan to E-mail is the fu nction that transmits image data scanned by the copier as a file attached to e-mail. If the size of the file attached to e-mail is limited and if a file size ex ceeds this limit, the f ile may be di vided (in binary unit s) for transmi ssion.
7. S ettings and Oper ation s for S can Fun ctions 87 Contr oller Sett ing ■ E-mail T ransmissi on Setting Set the mail serv er (SMTP server) to enab le mail transmission. Setting from PageScope Li ght 1. Start P a geS cop e Light. 2. Enter th e password an d log on t o the Adminis trator mode .
7. Settings and Operations for Scan F unctions 88 Setting from the copier control panel 1. Enter the Admi nistrator mode. 2. Select “Network set” – “E-mail/I-F ax” – “Send.” 3. Set the S MTP Serv er , T imeout of SMTP Server , and Mail Separatio n.
7. S ettings and Oper ation s for S can Fun ctions 89 ■ Sett ing th e Mail O ption s The subject and m essage o f e-m ail can be s et fo r mail trans mission thro ugh Scan to E-mail. Setting from PageScope Li ght 1. Start P a geS cop e Light. 2. Enter th e password an d log on t o the Adminis trator mode .
7. Settings and Operations for Scan F unctions 90 Scan Operation Y ou ha ve three w ays to choose from to perform t he scan op eration depending on whether the destinatio n is set with a one- touch key or a one time ke y , or set through direct input from the copier control pa nel.
7. S ettings and Oper ation s for S can Fun ctions 91 ■ Dir ect Input The address us ed in Scan to E-mail can be dir ectly input from the contro l panel of the copier , instead of using the o ne-touch ke y or one time k ey . 1. Press the Scan k ey on the copier .
7. Settings and Operations for Scan F unctions 92 Details of Scan Operation Settings ■ Setting the S canning Mode 1. Press the Scan k ey on the copier . 2. Select the “Scan Mode” tab . 3. Set the fo ll o wing ite m s . Scan Size : Set the scanning si ze for the document.
7. S ettings and Oper ation s for S can Fun ctions 93 ■ Sett ing C heck s 1. Select the “Mode Check” k ey . 2. Select the “Send” tab to check the settings made for Scan to E-mail. 3. Select the “Subject/From” tab to check the data set for “SUBJECT” and “FR OM” (sender’ s address).
7. Settings and Operations for Scan F unctions 94 7.6 Internet F ax Internet Fa x is the function that tr ans mits the imag e d ata captur ed through s cannin g as a f ile attached to e-mail. It dif fers from Scan to E-mail in that the f ormat of the attached f ile is standard ized.
7. S ettings and Oper ation s for S can Fun ctions 95 1. Using PageScope Light, make the settings for mail t ransmission, mail receptio n, mail options, and prin ting for the Internet F ax receiv ed data. ☞ p.96 2. Using P ageScope Li ght, make the settin g for One-T ouch K ey Re gistrat ion or One T i me Re gistration.
7. Settings and Operations for Scan F unctions 96 Contr oller Sett ing ■ Inter net F ax T ransmission Se tting T o make the settings, use the same screen as that u sed for setting for Scan to E-m ail. (The same transmiss io n set tings are made for Scan to E-mail and Internet Fax.
7. S ettings and Oper ation s for S can Fun ctions 97 Mail Check : Set whether to make a periodic check of the contents of the mail serv er or not. If “No” is selected, mail is not recei ved. Setting v alues : Y es, No 1-60 min. Port Number : Set the port number of the POP3 server .
7. Settings and Operations for Scan F unctions 98 Settin g the Internet F AX Opti ons The subject and mess age of e-mail can be s et for mail transmission through I nternet Fax . Setting from PageScope Li ght 1. Start P a geS cop e Light. 2. Enter th e password an d log on t o the Adminis trator mode .
7. S ettings and Oper ation s for S can Fun ctions 99 ■ Sett ing for Prin ting E -ma il /In te rnet F A X Set for printin g for internet F AX recei ved data. Setting from PageScope Li ght 1. Start P a geS cop e Light. 2. Enter th e password an d log on t o the Adminis trator mode .
7. Settings and Operations for Scan F unctions 100 Setting from the copier control panel 1. Enter the Admi nistrator mode. 2. Select “Network set” – “E-mail/I-F ax” – “Print.” 3. The same items as those with Pa geScop e Light can be set.
7. S ettings and Oper ation s for S can Fun ctions 101 ■ Dir ect Input 1. Press the Scan k ey on the copier . 2. Select “Direct.” 3. Select “I-F AX.” 4. Using ke ys on the control panel and 10-Ke y Pad, type the e-m ail address of the destination.
7. Settings and Operations for Scan F unctions 102 Details of Scan Operation Settings ■ Setting the S canning Mode 1. Press the Scan k ey on the copier . 2. Select the “Scan Mode” tab . 3. Set the fo ll o wing ite m s . Scan Size : Set the scanning si ze for the document.
7. S ettings and Oper ation s for S can Fun ctions 103 ■ Spe cifyin g the Docu men t Set the typ e of the documen t to be scanned. 1. Press the Scan k ey on the copier . 2. Select the “Document Set” tab . 3. Set the fo ll o wing ite m s . Original Direction : Set the placement direction of the documen t.
7. Settings and Operations for Scan F unctions 104 2. Select the “Subject/From” tab to check the data set for “SUBJECT” and “FR OM” (sender’ s address). 3. Select the “Contents” tab to check the message of the e-mail. ■ Erro r Message For [E-mail Address (Reply-T o:)] (Ref.
7. S ettings and Oper ation s for S can Fun ctions 105 Internet F ax Rece ption Internet Fax data (e-mail) transmitted fro m another de vice that complies wit h Internet F ax can be recei ved. The recei ved Internet F ax e-mails on the mail serv er are collecti vely re triev ed from the mail server and tempor arily stor ed in the copier .
7. Settings and Operations for Scan F unctions 106 7.7 The Operation of Capturin g Images by TW AIN TW A IN is the inter face that allo ws images c aptured by a specif ic de vice to be inp ut through a co mputer of a dif ferent platform. It is appl ied to control the s canner of the copier so as to capture scanned images in applications.
7. S ettings and Oper ation s for S can Fun ctions 107 Setting from the copier control panel 1. Enter the Admi nistrator mode. 2. Select “Network set” – “T wain.” 3. The P anel lock timeout for TW AIN can be set. Capturing Images by TW AIN ■ Sett ing th e Doc u men t 1.
7. Settings and Operations for Scan F unctions 108 Pixel T yp e : Specif y the type of data to be captured. Setting v alues : Full Color , Gray Scale, Black & White Place : Set ho w the document is to be scanned. Setting v alues : Glass, ADF Duple x : Select whether t he document to be scanned is two- side d or n ot.
7. S ettings and Oper ation s for S can Fun ctions 109 Retr ie ving Scan ners • Broadcast: Retrie ves scan ners b y the broadcast protocol. IP Port Base : Specify the IP Port B ase to be ret riev ed. Broadcast : Executes retriev al. • Multicasting : Retriev es scanners by the multicasting protocol.
7. Settings and Operations for Scan F unctions 110 7.8 Advance Registration of Destinations When using the scan functio n, it is con venient if the destination is registered through the copier co ntrol panel in adv ance. P ageScope Light is used to reg ister the destination .
7. S ettings and Oper ation s for S can Fun ctions 111 Job T ype : An icon corr esponding to the job typ e regi stered is displayed . Destination Name : Displ ays the destination name registered. Butto ns Apply : V alidates the change o f the inde x name.
7. Settings and Operations for Scan F unctions 112 6. When “Group” is s elected, the destination to be ne wly regis tered for one-touch key regi stration can be s et as group transmission . 7. Clicking the “Next” button will display the items to be set for each job type.
7. S ettings and Oper ation s for S can Fun ctions 113 • When File (Scan T o PC) is selected Destination Name : Specify the name of the des tination to b e re gistered for one-t ouch ke y . Setting v alue : 12 alphanumeric characters or less IP Address : Set the desti nation IP addr ess of the P C, on which the FTP application is runnin g .
7. Settings and Operations for Scan F unctions 114 E-mail Address (Reply-T o:): Set the e-mail address of the sender . Setting v alue : 72 alphanumeric characters or less MEMO When inputting two or mor e a ddresses, put comma between the addr ess.
7. S ettings and Oper ation s for S can Fun ctions 115 One T ime Registra tion Settings fo r One T ime Regi str ation are made us ing P ageSco pe Light. Thi s functi on dif fers from One-T ouch K ey Registration in that, when the transmission task is ex ecuted, these settings are gone.
7. Settings and Operations for Scan F unctions 116 4. Click th e One T ime Regi stration b ox. 5. Select the appropriate job ty pe. 6. Clicking the “Next” button will display the items to be set for each job type.
7. S ettings and Oper ation s for S can Fun ctions 117 File T ype : Select the f ile format in which the scanned image is to be s tor e d. Setting v alues : TIFF , PDF , JPEG Color Mode : Select the color , in which the document is scan ned. Setting values : Auto Co lor , Gray Scale, B/W , Full Color Background Remo v e : Set background remo val.
7. Settings and Operations for Scan F unctions 118 • When File (Scan T o HDD) is selected Destination Name : Specify the name of the des tination to b e re gistered for one time us e. Setting v alue : 12 alphanumeric characters or less User Directory : The list displays the u ser directory that has been re gistered.
7. S ettings and Oper ation s for S can Fun ctions 119 Erase : Select the erase type. Setting v alues : No, Left Erase, T op Erase, Frame Er ase Set the erase width in mm o r 1/16”.
7. Settings and Operations for Scan F unctions 120.
121 8. Job Ma nagement 8.1 Print Job Management This chapt er expl ains print j ob management. Specifying Operation f or Job It is possible to specif y the oper atio n for the job in the copier by setting the printer dri ver .
8. Job Manage ment 122 Setting the default user name: 1. Select the “Device Option Setting” tab . 2. T ype the def ault user name in “Def ault User Name” of “Job Owner” (up to 255 alphanumeric characters).
8. Job Manage ment 123 Printing Pages with a Distrib uti on Number T o identify each print job, a distrib ution number can be printed in the backgr ound. The option al HDD and 2 56-MB memory must be moun ted on the copier . 1. Select the “Job Management” tab .
8. Job Manage ment 124 Pr oof and Print When a print cycle is run with Proof and Print set, onl y the f irst copy will be printed, while the rest of the copies will be sto red in memory . The rest will not be printed un til the job is unlocke d by th e copier contr ol panel.
8. Job Manage ment 125 Store to Memory If Store to Memory is set for a print job to b e printed and the job is transmitted, the job is stored in the memory of the copier and is not printe d. The settin g must be canceled from the copier co ntrol panel to ef fect printing of the job .
8. Job Manage ment 126 8.2 Job Operations on PageScope Light The status of the job being proces sed by the c opier can be check ed on P ageScope Light. It is also possible to delete or otherwise operate a job. Print job list This lists the jo bs being pr ocessed for printing.
8. Job Manage ment 127 • Detailed i nformation displayed Di vision ID : Sho w s the access nu mber [1 to 998] if the Copy T rack fu nction is acti ve. Error Information : Displays the status of the job in detail. If the job status is “Printin g S topped (Error),” it shows the details of the warning.
8. Job Manage ment 128 Print job history This lists the jo bs which have been processed for printing. Displ ay Pr ocedure 1. Start P a geS cop e Light. 2. From the “Job” tab, select “ Job History” – “Print.” Descriptions o f Cont ent s of Display Result : Dis plays the result of execution of the job .
8. Job Manage ment 129 Destination : Dis plays the exit port of the job . When FN -116 is mo un ted : [T op T ray , Elev ator T ray , Third T ray] When FN-8 is mounted : [Elev ator T r ay , Saddle Stack T ray] Receiv ed T ime : Dis plays the time-of-day when the job was registere d with the de vice.
8. Job Manage ment 130.
131 9. Tro ublesho oting 9.1 Unable to Print This chapt er expl ains the tr oubleshooting procedures f or possib le malfunctio ns. Perform the troub leshooting procedures giv en below when the copier is unable to print e ven if you ex ecute a prin t command from your PC.
9. Tr oublesho oting 132 If the problem persists after all these procedures hav e been performed, read the User Manual of the cop ier . Symptom Possib le Caus e Action Conti nuation from pre vious page ( Pri n tin g does not start despite the completion of print ing setup on the PC.
9. Tr oublesho oting 133 9.2 Unable to Make Correct Settings / Unable to Print Exactly as Set Perform these troubles hoo tin g procedu res if yo u cann ot mak e proper settings in the print dri ver or when the prin t results do not represent what has been s et.
9. Tr oublesho oting 134 Symptom Possible C ause Action The watermark cannot be printed. The wat ermark is not correctly set. Check the watermark s etting. The watermark density is set to a low le vel. Check the “S hading” sett ing. W atermark m ay not be printed i n graphics applications .
9. Tr oublesho oting 135 Symptom Possible C ause Action Unable to specify Punch. Hol e Punch canno t be specified together with Booklet, OHP , Thick2, and/or Thic k3.
9. Tr oublesho oting 136 Symptom Possible C ause Action Distribution Number cannot be specif i ed. T o spec ify Di stri bution Number , an optional HDD and an optio nal 256-MB memory must be mounte d on the copier . The function can be s pecified when “HDD” is added to “De vice Option” of the printer dr i v er .
137 Append ixes A. Product Inf ormation This produ ct has been appro ved b y WH QL. Item Deta il Remar k CPU MPC8240 -200 MH z The copi er CPU is use d. RAM 32MB (on copi er board) + 128MB (me m ory that co me s w ith th e contr oller) Printe r Emulati on PC L5c Host Interfac e IEEE12 84 (C ompati ble, Nibb le, ECP) USB (version 1.
Appe ndi xes 138 B. How to Use PageScope Ligh t What is Pa ge Sc ope L i ght ? PageScope Light is a device management utility built into the controller . From a PC on the netwo rk, start a W eb brows er and access Pa geScope Light. Then, controller settings can be changed.
Appe ndi xes 139 Initial Screen Components The screen that is dis played immediately after Pag eScope Light has been accessed consists of the following components. This screen is generally referred to as the user mode screen and can be vie wed by an yone.
Appe ndi xes 140 (3) T abs Display s the categ ories to be controlled b y PageScope Light. •S y s t e m •J o b • File •P r i n t • Scan (4) Menu Displays information and s ettings in the selected tab . The menu items dif fer according the specif ic tab selected for use.
Appe ndi xes 141 Entering the Administrator Mode The opera ting mode can be sw itched between t he User mode and A dministr ator mode. T o make system settings, it is necessary to enter the Administrator mode. T ype the admi nistrator pas sword of t he copier in the Adm inistrato r’ s Code box and then click the “Log-in” b utton.
Appe ndi xes 142 1. User Mode Checking Copier Status • Checking P aper Source Status Displ ay Pr ocedure Click the “System” tab an d then select “Detail” – “Input T ray .” Screen Description Input Tr ay : Sho ws th e names o f the trays.
Appe ndi xes 143 Paper T ype : Sho ws the type of t he paper loaded. Normal, Thic k 1, Thick 2 , Thick 3, En velope, Label, Po st Card, O HP , Normal 2nd -Side, Thick 1 2nd-Side, Th ick 2 2nd- Side, Thi ck 3 2nd-S ide, Post Card Seco nd Sid e For Du plex If paper attrib utes hav e been set, Normal (Specialty , etc.
Appe ndi xes 144 • Checking Exit T ray Status Displ ay Pr ocedure Click the “System” tab an d then select “Detail” – “Output T ray .” Screen Description Output Tray : Sho ws the names of the trays of the op tion mounted on the copier .
Appe ndi xes 145 • Checking Hard Disk Status Displ ay Pr ocedure Click the “System” tab and then select “Detail” – “Head Disk” Screen Description T otal Space : Shows the space av ailable for use of the hard disk mounted in the co pier .
Appe ndi xes 146 • Checking Net work S tatus Displ ay Pr ocedure Click the “System” tab an d then select “Detail” – “Interf ace Info” Screen Description Interface In fo T ype : Sho w s the type o f the netw ork to be us ed. Ethernet 10 Base-T/100Base-TX IP Address : Sho ws the IP address that h as been set.
Appe ndi xes 147 • Che cking Cons umab les an d Sup plie s Stat us Displ ay Pr ocedure Click the “System” tab an d then select “Detail” – “Consumables” Screen Description Imaging Unit ( C) : Sho ws the information concer ning each Imaging Unit.
Appe ndi xes 148 Ready , Near End of Life, En d of Life Fusin g Unit : Sho w s the in formation concerning th e Fusing Un it. Ready , Near End of Life, En d of Life T ransfer Roller : Shows the information concerning the T ransfer Roller Unit.
Appe ndi xes 149 Meter Count • Meter Count Displ ay Pr ocedure Click the “System” tab an d then select “Detail” – “Meter Count” Screen Description Copy /Prin ter Copy Black co unter : Shows the count of black copies of the copy ou tput counter controlled b y the copier .
Appe ndi xes 150 Copy + Printer Black counter: Sho w s the coun t of black co pies and print ed pages of the cop y and printed ou tput counter cont rolled by the copier . Copy + Printer Color counter: Sho w s the coun t of color copies and prin ted pages of the cop y and printed ou tput counter cont rolled by the copier .
Appe ndi xes 151 Online Sup po rt Information • Online Sup po r t Inf orm ation Displ ay Pr ocedure Click the “System” tab and then select “Online Assistance” Screen Description Contact : Sho w s the contact, to which y ou can direct your inquiri es abou t the product.
Appe ndi xes 152 Print job list • Print job list Displ ay Pr ocedure Click the “Job” tab and then select “ A cti ve Job” – “Prin t” Screen Description Job Name : Disp lays the User Name specified o n the printer dri ver . Status : Ind icates the status of the job .
Appe ndi xes 153 Destination : Dis plays the exit port of the job . When FN -116 is mo un ted : [T op T ray , Elev ator T ray , Third T ray] When FN-8 is mounted : [Elev ator T r ay , Saddle Stack T ray] File Name : Displays the nam e of the job . Number of Pages : Display s the number of pages per one copy set of the job .
Appe ndi xes 154 • Scanner job list Displ ay Pr ocedure Click the “Job” tab and then select “ A cti ve Job” – “Scan ” Screen Description Status : Ind icates the status of the job . [Scanning, S canning St opped, Separat e Scanning Stopped, Scanning S topped (Error ), T ransfering] Job T ype : Displays the type of the job .
Appe ndi xes 155 • Print job hi story Displ ay Pr ocedure Click the “Job” tab and then select “Job History” – “Print” Screen Description Result : Dis plays the result of execution of the job .
Appe ndi xes 156 Destination : Dis plays the exit port of the job . When FN -116 is mo un ted : [T op T ray , Elev ator T ray , Third T ray] When FN-8 is mounted : [Elev ator T r ay , Saddle Stack T ray] Receiv ed T ime : Dis plays the time-of-day when the job was registere d with the de vice.
Appe ndi xes 157 • Scanner jo b history Displ ay Pr ocedure Click the “Job” tab and then select “Job History” – “Scan” Screen Description Result : Displays the result o f ex ecution of the job . [Job Completed, Job Deleted by Error , Job Deleted by User] Job T ype : Dis pl ays the meth od of delivery fo r the job .
Appe ndi xes 158 File • HDD Directories Displ ay Pr ocedure Click the “File” tab and then select “HDD Directories” Screen Description User directo ry : Click to display a list of f iles contained in the directory . A password is necessary for all but PUBLIC.
Appe ndi xes 159 • Fil list Displ ay Pr ocedure Click the “File” tab and then select “HDD Directories” Screen Description Data list screen File Name : Displays the name of the file stored in the user directory . Receiv ed T ime : Dis plays the time-of-day when the f ile was stored in the user dir ectory .
Appe ndi xes 160 • External server link status Displ ay Pr ocedure Click the “File” tab and then select “External Server Link” Screen Description Server Add ress : Displays the FTP server , which has been set “ON” to “External Serv er Link,” of all the FTP serv ers registered in the Administrator mode.
Appe ndi xes 161 Print • Setting Pri nter Displ ay Pr ocedure Click the “Print” tab and then select “Default Set” – “Setting” Screen Description Paper Size : Select the default paper size selected when the controller receiv es a print job that does not sp ecify any s pecific paper s ize.
Appe ndi xes 162 Output : Select the defau lt double-si ded print funct ion selected when a de vice recei v es a print job that does not specify an y specif ic do uble-si ded p rint fun ction.
Appe ndi xes 163 • PCL Setting Displ ay Pr ocedure Click the “Print” tab and then select “Default Set” – “PCL Setting” Screen Description Fon t Number : Set the def ault font number . Setting v alues : 0 to 45 Symbol Set : Set the default symbol set.
Appe ndi xes 164 • Font I nformation Displ ay Pr ocedure Click the “Print” tab and then select “Fon t Information” Screen Description Sho w the PCL font List.
Appe ndi xes 165 • Report T ype Displ ay Pr ocedure Click the “Print” tab and then select “Report T ype” Screen Description Configuration : I nsert a check mark into the box to print the printer controll er setup page. PCL Demo Page : In sert a check mark into the box to print th e PCL demo page.
Appe ndi xes 166 Scan • One T o uc h Key Regist rati on Displ ay Pr ocedure Click the “Scan” tab and then select “One T o uch Ke y Regis tration” Screen Description Index name : Displays the name of the inde x set. It can be selected and renamed.
Appe ndi xes 167 • One T ime Registration Displ ay Pr ocedure Click the “Scan” tab and then select “One T i me Re gistration” Screen Description Job T ype : An icon correspo nding to the j ob type regist ered for one time regist ration is displayed.
Appe ndi xes 168 2. Adminis trat or Mode System • User’ s Choice 1 Displ ay Pr ocedure Click the “System” tab an d then select “User’ s Choice” – “User’ s Choice1” Screen Description Date/T ime Set : Set the date and time-of-day .
Appe ndi xes 169 Sleep T ime : Set the sleep time of the copier . Setting v alue : 15 to 240 ( min.) Auto Clear Mode : If “Y es” is set, the copier d etermines, when the optional P lug-In Coun ter or the m agnetic card of the Data Controller is removed, that a ne w user is about to use it, thus clearing the settings.
Appe ndi xes 170 • User’ s Choice 2 Displ ay Pr ocedure Click the “System” tab an d then select “User’ s Choice” – “User’ s Choice2.” Screen Description Priority Exit Tray : Set the exit tray that is gi ven priority when FN-1 16 is moun ted.
Appe ndi xes 171 2in1/4i n1/Bookl et Cop y Zoom: Set the function that automatically selects the zoom rati o whe n 2in1 or 4 in1 is s ele cted . Setting v alues : Y es, No Sleep : Set the Sleep function. Setting v alues : Y es, No Screen Pattern : Set the screen pattern f or PC print output.
Appe ndi xes 172 • Setting the Br owser Displ ay Pr ocedure Click the “Print” tab and then select “Preference” Screen Description Refresh Rat e : Set the screen r efresh rat e of Pa geScope Light. Setting v alue : 30 to 7200 (sec.) Language : Set the display lan guage of P ageScope Li ght.
Appe ndi xes 173 • Online Sup port Function Displ ay Pr ocedure Click the “Scan” tab and then select “Online Assistance.” Screen Description Contact : T ypes the contact, to wh ich you can direct your inquiri es abou t the product.
Appe ndi xes 174 File • HDD Directories Displ ay Pr ocedure Click the “File” tab and then select “HDD Directories.” Screen Description Data list screen File Name : Displays the name of the file stored in the user directory . Receiv ed T ime : Dis plays the time-of-day when the f ile was stored in the user dir ectory .
Appe ndi xes 175 • HDD File Life Displ ay Pr ocedure Click the “File” tab and then select “File S torage Life.” Screen Description File Storage Life : Specify the per iod of storage of files in the hard disk.
Appe ndi xes 176 Print • Local Interface Setting Displ ay Pr ocedure Click the “Print” tab and then select “Local I/F .” Screen Description Parallel Inter face : Set the communication metho d. Setting values : C ompa tib le, Nibble, ECP I/O T imeout : Set the communication timeout.
Appe ndi xes 177 • IPP Setting Displ ay Pr ocedure Click the “Print” tab and then select “IPP .” Screen Description Printer Name : T ype in a name to identify the prin ter during IP P printing. Printer Local : T ype in the location of the printer .
Appe ndi xes 178 Scan • Setting the Fil e Format Displ ay Pr ocedure Click the “Scan” tab and then select “Scan” Screen Description • Scan Device Nam e : The characters set for this parameter is appended before the name of the image file cr eated with the scan funct ion.
Appe ndi xes 179 NetW ork • TCP/IP Settin g Displ ay Pr ocedure Click the “Network” tab and then select “Common Setting” – “TCP/IP” Screen Description IP Address : Set the IP address of th e controller . Subnet Mask : Set the subn et mask for the network to be connected.
Appe ndi xes 180 • IPP Setting Displ ay Pr ocedure Click the “Network” tab and then select “Common Setting” – “IPP .” Screen Description Enab le IPP : Set the IP P fun ction. Setting v alues : Enable, Disable Accept IPP Jobs : Set the IPP reception function.
Appe ndi xes 181 • NetW are S etting Displ ay Pr ocedure Click the “Network” tab and then select “Common Setting” – “NetW are Conf igurat ion.” Screen Description Enable NetW are : Set the NetW are printing. Setting v alues : Enable, Disable Frame T ype : Set the frame type .
Appe ndi xes 182 Preferred NDS T ree : Set the preferred NDS tree name for NetW are. Setting v alue : 63 alphanumeric characters or less Print Queue Scan Rate : Set the print queue scan r ate for NetW are. The default v alue is 1 sec. Setting v alue : 1 to 65535 sec.
Appe ndi xes 183 • NetW are Status Displ ay Pr ocedure Click the “Network” tab and then select “Common Setting” – “NetW are Status.” Screen Description NetW are Server : Dis plays the NetW are server name. Queue Name : Displays the queue name of the NetW are server .
Appe ndi xes 184 • W in dows Printing Setting Displ ay Pr ocedure Click the “Network” tab and then select “Common Setting” – “W indows Conf igurat ion.” Screen Description Enable W indo w s Pr int ing Serv i ce: Set the W indo ws pr inting serv ice.
Appe ndi xes 185 • E-mail/Internet F AX Reception S ettin g Displ ay Pr ocedure Click the “Network” tab and then select “E-mail/Internet F AX” – “Recei ve.” Screen Description POP3 Server : Set the IP address of the POP3 serv er . POP3 Login Name : Set the logon name of the POP3 serv er .
Appe ndi xes 186 • E-mail/Internet F AX T ransmissio n Setting Displ ay Pr ocedure Click the “Network” tab and then select “E-mail/Internet F AX” – “Send.” Screen Description SMTP Server : S et the IP address of the SMTP server . Port Number : Set the port num ber of the SMTP serv er .
Appe ndi xes 187 • Setting the Mail Optio ns Displ ay Pr ocedure Click the “Network” tab and then select “E-mail/Internet F AX” – “E-mail.” Screen Description Subject : T ype the title of the e-mail. Setting v alue : 64 characters Description : T ype the messag e of the e-ma il.
Appe ndi xes 188 • Setting the Internet F AX Options Displ ay Pr ocedure Click the “Network” tab and then select “E-mail/Internet F AX” – “Internet F AX.” Screen Description Subject : T ype the title of the e-mail. Setting v alue : 64 characters Description : T ype the messag e of the e-ma il.
Appe ndi xes 189 • Setting fo r P rintin g E-mail/Inter net F AX Displ ay Pr ocedure Click the “Network” tab and then select “E-mail/Internet F AX” – “Print.” Screen Description T ext Print : Set whether to print an E-mail message recei ved by the copier .
Appe ndi xes 190 • Setting the (Proxy ) FTP Ser ver Displ ay Pr ocedure Click the “Network” tab and then select “FTP Server” – “FTP Server Conf igurat ion.” Screen Description Proxy IP Addres s : When a proxy serv er is to be used, set the IP address of the p roxy serv er .
Appe ndi xes 191 • Registering FT P S ervers Displ ay Pr ocedure Click the “Network” tab and then select “FTP Server” – “FTP Server Re gistration.
Appe ndi xes 192 IP Address : Specify the IP addres s of the FTP serv er . Login Name : Specify th e name with whic h to log on t o the FTP serv er . Setting v alue : 32 alphanumeric characters or less Pas sword : Specify th e password wi th which to log on to the FTP ser ver .
Appe ndi xes 193 • TW AIN Setting Displ ay Pr ocedure Click the “Network” tab and then select “TW AIN Coufiguration ” Screen Description Operation Lock T ime : Set the operation lock time o f the control panel to enable TW AIN operations from the PC.
Appe ndi xes 194 C. Incompatible Function Combinations ■ Function Limi tation Matrix Blank : selectable combination × : not selectable comb ination Media T ype Output Plain Paper Thick Paper 1 Thic.
Appe ndi xes 195 ■ Limitatio n between P aper Size and Funct ions Blank : selectable combination × : not selectable comb ination Paper Source Media T ype Output Setting T ray1 (Multi-purpo se tray).
Appe ndi xes 196 Add the foll o wing Opt ions in the co lumn “Installed Optio ns” by depressing “Device Option Setting ” T ab, and the functio n(s) shown in the right columns can be selected . The follo wing combin atio n of functions in the left and right column can not be selected at the same time.
197 INDEX INDEX A Adm inist r ato r Mod e 141 B Booklet Prin tin g 54 C Connecting the Networ k Cable 5 Cover 5 8 D Duplex P rinting 54 Duplex/ Booklet Print ing 54 E Easy Set 45 Energy Save Mode Time.
INDEX 198 P PageScope Light 138 Printer Figure 45 Printing P ages with Watermarks 50 Proof a nd Prin t 121, 1 24 Publ ic di recto ry 79 R Regis ter i n g FTP S erver s 70 S Scan to E-mail 86 Scan to F.
Printer Controller CN3101e User Man ual Printer Controller CN3101e User Manual 2002. 6 7664-4334-02 Copyright 2002 MINOLTA CO., LTD. The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers.
An important point after buying a device Minolta CN3101e (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Minolta CN3101e yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Minolta CN3101e - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Minolta CN3101e you will learn all the available features of the product, as well as information on its operation. The information that you get Minolta CN3101e will certainly help you make a decision on the purchase.
If you already are a holder of Minolta CN3101e, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Minolta CN3101e.
However, one of the most important roles played by the user manual is to help in solving problems with Minolta CN3101e. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Minolta CN3101e along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
