Instruction/ maintenance manual of the product 5440 Minolta
Go to page of 13
MINOL T A ® MA GICOL OR 5430 • 5440 • 5450 CARTRIDGE REMANUF A CTURING INSTR UCTIONS © 2007 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show comp atibility only .
UNINET IMAGING INC . • MINOLT A ® MAGICOLOR 5430 CARTRIDGE REMANUF ACTURING INSTRUCTIONS MINOL T A ® MAGICOLOR 5430 TONER CARTRIDGE SIDE VIEW WITH END CAP SHOWN BACK VIEW OPPOSITE SIDE VIEW © 2007 UniNet Imaging Inc. All Trademark names are property of their respective owners.
UNINET IMAGING INC . • MINOLT A ® MAGICOLOR 5430 CARTRIDGE REMANUF ACTURING INSTRUCTIONS SEP ARA TING THE CARTRIDGE 1. Locate the cartridge end cap of the car tridge. Using a phillips screwdriv er , remov e the sev en highlighted screws that hold the cartridge together .
UNINET IMAGING INC . • MINOLT A ® MAGICOLOR 5430 CARTRIDGE REMANUF ACTURING INSTRUCTIONS SEP ARA TING THE DRUM UNIT 5. The drum unit (top) and de veloper unit (bott om) are joined together . 6. Locate the gear train side of the drum unit. Remo ve the OPC contact (highlight ed).
UNINET IMAGING INC . • MINOLT A ® MAGICOLOR 5430 CARTRIDGE REMANUF ACTURING INSTRUCTIONS 9. Release the com pression spring on the opposite side of the drum unit (drive gear side).
UNINET IMAGING INC . • MINOLT A ® MAGICOLOR 5430 CARTRIDGE REMANUF ACTURING INSTRUCTIONS 15. Once the scre w has been remov ed, turn the suppor t count er clockwise until it comes to a st op. This will unlock the suppor t and allow y ou to remov e it completely .
UNINET IMAGING INC . • MINOLT A ® MAGICOLOR 5430 CARTRIDGE REMANUF ACTURING INSTRUCTIONS REMOVING THE COR ONA WIRE ASSEMBL Y 19. R emov e the corona wire b y pushing it to wards the opening on the gear train side. This will allow y ou to lift one side of it for easy remov al.
UNINET IMAGING INC . • MINOLT A ® MAGICOLOR 5430 CARTRIDGE REMANUF ACTURING INSTRUCTIONS 22. Remo ve the wiper blade in the manner sho wn. CLEANING THE W ASTE HOPPER 23. Hopper shown with wiper blade complet ely removed. Dump the wast e toner from the hopper and clean thor oughly using compressed air .
UNINET IMAGING INC . • MINOLT A ® MAGICOLOR 5430 CARTRIDGE REMANUF ACTURING INSTRUCTIONS 25. Once the corona wire is aligned with the cartridge, Push it with your finger tips until it is back into its original place. INST ALLING THE OPC 26. Before inserting the OPC, make sure its gears are facing in the correct position.
UNINET IMAGING INC . • MINOLT A ® MAGICOLOR 5430 CARTRIDGE REMANUF ACTURING INSTRUCTIONS 29. Assemble the two halv es by first inser ting the driv e gear . 30. Once that has been accomplished join the two halv es and inser t the pin on the gear train side.
UNINET IMAGING INC . • MINOLT A ® MAGICOLOR 5430 CARTRIDGE REMANUF ACTURING INSTRUCTIONS 33. Once the two halv es are assembled, continue installing the gear train and springs as shown. REMOVING THE OEM CHIP 34. Locate the OEM chip on the inner portion of the end cap (shown).
UNINET IMAGING INC . • MINOLT A ® MAGICOLOR 5430 CARTRIDGE REMANUF ACTURING INSTRUCTIONS 36. Af t ermarket chip installed. 3 7 . Install the drum contact as shown. ASSEMBLING THE END CAP 38. Once the chip has been installed, you can pr oceed with installing the inner section of the end cap.
UNINET IMAGING INC . • MINOLT A ® MAGICOLOR 5430 CARTRIDGE REMANUF ACTURING INSTRUCTIONS 40. Install the outer end cap. 4 1. Secure the end cap with the seven scre ws. NOTES © 2007 UniNet Imaging Inc. All Trademark names are property of their respective owners.
An important point after buying a device Minolta 5440 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Minolta 5440 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Minolta 5440 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Minolta 5440 you will learn all the available features of the product, as well as information on its operation. The information that you get Minolta 5440 will certainly help you make a decision on the purchase.
If you already are a holder of Minolta 5440, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Minolta 5440.
However, one of the most important roles played by the user manual is to help in solving problems with Minolta 5440. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Minolta 5440 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
