Instruction/ maintenance manual of the product MLH-H 1130 Milan Technology
Go to page of 9
Installation Guide MIL-H1120 4-P ort Ethernet SOHO Hub MIL-H1130 8-P ort Ethernet SOHO Hub.
Introduction The MIL-H1100 family of small SOHO Ethernet hubs brings unmatched flexibility to LAN environments . These hubs provide your netw ork with multiple wiring connections for up to 4 or 8 unshielded twisted pair (UTP) ports.
Before going any fur ther , examine the package and make sure that y ou have all of the items listed below: · 4- or 8-port Ether net hub · Installation Guide · P ower adapter If you are miss ing any of these items, contact y our dealer immediately .
Caution: Before you begin the installation, c heck the A C power line v oltage used in your area. The AC power adapter that w as included with your hub should match the pow er supply voltage used in your area. Using an A C power adapter with an incorrect AC v oltag e ma y damag e y our hub.
10Base-T Station to Hub Connection Use the following procedure to connect a 10Base-T Ethernet station to the hub. · Make sure that the hub's slide switc h is selected to NORMAL mode for the 1st port. · Connect one end of the cable to the 1st port of the hub and the other end to the station, as shown in Figure 3.
LED Indicators Figure 5 shows the LED indicators , which indicate the link status of eac h of the por ts , whether the hub is receiving pow er and whether there is network acti vity .
Specifications Standards IEEE802.3 10Base-T Network Interface and Cable Specifications RJ-45 ports for use with 10Base-T cabling Maximum Segment Lengths 10Base-T (UTP) 100 meters maximum Indicators P ower LED Collision LED Link/activity per port Physical Dimensions 4-port hub: 100.
Humidity: operating, 10% to 90% RH External Power A dapter V oltage/frequenc y: Input: 120 V AC @ 60 Hz or 230 V AC @ 50 Hz Output: 7.5 VDC @ 500 mA (4-port) 7.
T o Contact M iLAN T echnology F or prompt response when calling for ser vice infor mation, ha ve the following information ready: · Product serial number and rev · Date of purchase · V endor or place of purchase Y ou can reach MiLAN T echnolog y tec hnical suppor t at: E-mail: support@milan.
An important point after buying a device Milan Technology MLH-H 1130 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Milan Technology MLH-H 1130 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Milan Technology MLH-H 1130 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Milan Technology MLH-H 1130 you will learn all the available features of the product, as well as information on its operation. The information that you get Milan Technology MLH-H 1130 will certainly help you make a decision on the purchase.
If you already are a holder of Milan Technology MLH-H 1130, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Milan Technology MLH-H 1130.
However, one of the most important roles played by the user manual is to help in solving problems with Milan Technology MLH-H 1130. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Milan Technology MLH-H 1130 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
