Instruction/ maintenance manual of the product MIL-S8000T Milan Technology
Go to page of 13
MIL-S8000T 8-Port 1000BASE-T Gigabit Ethernet Switch USER GUIDE.
Regulatory Approval - FCC Class A - UL 195 0 - CSA C22.2 No. 950 - EN60950 - CE - EN55022 Class A - EN55024 Canadian EMI Notice This Class A digital apparatus meets all the requirement s of the Can adian Interference-Causing Equipment Regulations.
Table of Contents 1. Introduction Gigabit Ethernet T echnology Switching T echnology Features Package Content s 2. Hardware Description Front Panel Rear Panel LED Indicators 3.
1. Introduction Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing the same packet structure, format, and support for CSMA/CD protocol, full duplex, flow con.
to users on a local area network. A s witch increases capacity and decreases network loading by making it possible for a local area network to be divided into different segments which do not compete with each other for network transmission capacity, giving a decreased load on each.
Package Contents Unpack the content s of the package and verify them against the checklist below . MIL-S8000T Gigabit Ethernet Switch External Power Adapter Four Adhesive Rubber Feet User's Guide W arranty Card If any item is missing or damaged, please cont act your local dealer for service.
2. Hardware Description Front Panel The front panel of the Gigabit Ethernet Swit ch consists of LED Indicators, which display the conditions of the Gigabit Ethernet Switch and the status of the network.
LED Indicators The LED indicators of the Gi gabit Ethernet Switch provide a real-time indication of system operating statuses. There are three LED-indicato rs for each Gigabit Ethernet port and one Power LED for the Unit. POWER The Power LED indicator is solid green when the Gigabit Ethernet Switch is receiving power.
3. Hardware Installation Desktop Installation Install the MIL-S8000T Gigabit Ethernet Switch in a location that conforms to the acceptable operation te mperature and humidity ranges (see Technical Specifications). It is recommended that the site be free from strong electromagnetic source, vibration, dust, and direct sunlight.
4. Technical Specifications General Specifications S tandards: IEEE 802.3ab 1000BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3 10BASE-T IEEE 802.3x Flow Control Protocol: CSMA/CD Data T ransfer Rate: 10Mbps.
Performance Specifications T ransmission Method: S tore-and-forward RAM Buffer: 256K Bytes per device Filtering Address T able: 8K MAC address per device Packet Filtering/Forwarding Rate: Full wire sp.
Appendix A: Regulatory Information FCC Warning This equipment has been tested a nd fou nd to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. Th ese limits are designed to provide reasona bl e protection against harmful interferen ce when the equipment is operated in a commercial environment.
90000426 Rev A 10.
An important point after buying a device Milan Technology MIL-S8000T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Milan Technology MIL-S8000T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Milan Technology MIL-S8000T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Milan Technology MIL-S8000T you will learn all the available features of the product, as well as information on its operation. The information that you get Milan Technology MIL-S8000T will certainly help you make a decision on the purchase.
If you already are a holder of Milan Technology MIL-S8000T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Milan Technology MIL-S8000T.
However, one of the most important roles played by the user manual is to help in solving problems with Milan Technology MIL-S8000T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Milan Technology MIL-S8000T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
