Instruction/ maintenance manual of the product MIL-S800 Milan Technology
Go to page of 12
MIL -S800 User ’s Guide 8 port 10/100BASE- TX Switch.
Regulatory Approval - FCC Class A - UL 195 0 - CSA C22.2 No. 950 - EN60950 - CE - EN55022 Class B - EN55024 Canadian EMI Notice This Class A digital apparatus meets all the requirement s of the Canadian Interference-Causing Equipment Regulations.
T able of Contents C h a p t e r 1 . I n t r o d u c t i o n Pg 1 1-1 General Description……………………………………. Pg. 1 1-2 K ey Features……………………………………………… Pg. 1 1-3 P ackage Contents……………………………………… Pg.
1 Chapter 1 Introduction 1-1 General Description The MIL-S800 switch provides eight auto-sensing 10/ 100Mbps RJ45 Ethernet port s. This high performance, low cost, wire speed desktop switch is ideal for any network where 8 ports are needed, for a solution to an enterprise need or for a home network.
2 1-3 P ackage Contents Y our p ackage contents should include the following p arts: • One 8-port Auto-sensing switching Hub • One DC power adapter • This User ’s Guide • Four rubber feet with adhesive pads • T wo magnets • W arranty card Figure 1.
3 1-4 Har dware Description The Front Panel The front panel cont ains power and LED Indicators. Figure 2. Front p anel view of the MIL- S800 Front p anel LED Indicators Per Device Power 100M (Link on 100Mbps) LNK/ACT (Link/Activity) Per Port FDX/COL (Full Duplex/Collision) For LED details, please refer to Chapter 2, LED Descriptions.
4 Chapter 2 Hardware Installation 2-1 Quick Installation • The MIL-S800 should be placed in a well-ventilated room with proper temperature and humidity . • Do not place the unit near water . • The maximum distance between the port to the st andard network interface is 100 meters.
5 2-2 LED Descriptions Figure 5. Front p anel view of LED indicator s The following table list s the LEDs and their function..
6 Chapter 3 Network Application 3-1 Stand Alone The application of a simple st andalone switch i s illustrated b elow . The maximu m distance betwe en the switch and the workstation is 100 meters.
7 Chapter 4 Troubleshooting • Power If the power indicator is not on after the power cord is plugged in, check the power outlet or power cord. If you lose power after the switch has been operating for some time, check for loose power connections, power losses or surges at the power outlet.
8 Chapter 5 Product Specification 5-1 General Specification S tandard Compliance IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet Number of Ports 8 10/100Mbps Auto-sensing RJ-45 ports.
9 90000377_F.
An important point after buying a device Milan Technology MIL-S800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Milan Technology MIL-S800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Milan Technology MIL-S800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Milan Technology MIL-S800 you will learn all the available features of the product, as well as information on its operation. The information that you get Milan Technology MIL-S800 will certainly help you make a decision on the purchase.
If you already are a holder of Milan Technology MIL-S800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Milan Technology MIL-S800.
However, one of the most important roles played by the user manual is to help in solving problems with Milan Technology MIL-S800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Milan Technology MIL-S800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
