Instruction/ maintenance manual of the product HB-E-TX-8 Milan Technology
Go to page of 10
For assistance in installing, using, or maintaining the TRANSITION Networks LAN Master™ TX8 100BASE-TX 8-Port Hub, contact TRANSITION Networks T echnical Support at: (800) 260-1312 or contact your local distributor .
LAN Master™ TX8 100BASE-TX 8-Port Hub 16 CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network.
T able of Contents 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . 1 The LAN Master™ TX8 Hub . . . . . . . . . . . . . . . . . . . . . . . . .1 LAN Master™ TX8 Hub Features . . . . . . . . . . . . . . . . . . . . . . . .1 Networking the LAN Master™ TX8 Hub .
LAN Master™ TX8 14 1 100BASE-TX 8-Port Hub 1. INTRODUCTION This guide is intended for the system or network administrator responsible for installing and monitoring a TRANSITION Networks LAN Master ™ TX-8 100BASE-TX 8-Port Hub.
LAN Master™ TX8 2 13 100BASE-TX 8-Port Hub Networking the LAN Master™ TX8 Hub Use the LAN Master ™ TX8 100BASE-TX 8 port hub alone to provide eight RJ-45 Fast Ethernet port connections. Cascade two LAN Master ™ TX8 hubs, using the uplink port at the front of the hubs, to provide fourteen RJ-45 Fast Ethernet port connections.
LAN Master™ TX8 12 3 100BASE-TX 8-Port Hub LAN Master™ TX8 Connectors and Status LEDs RJ-45 Connectors Eight (8) 100BASE-TX RJ-45 connectors are located at the front of the LAN Master ™ TX8. The RJ-45 jacks support connection to Category 5 shielded or unshielded 100 ohm twisted pair 100BASE-TX cable.
LAN Master™ TX8 4 11 100BASE-TX 8-Port Hub 2. SITE CONSIDERA TIONS The site for the LAN Master ™ TX8 hub must provide: • AC power outlet for each hub • Adequate ventilation • Standard enviro.
LAN Master™ TX8 10 5 100BASE-TX 8-Port Hub 3. INST ALLA TION NOTE: LAN Master ™ TX8 Link Integrity cannot be disabled. All devices connected to the LAN Master ™ TX8 MUST have link functions enabled. To install the LAN Master ™ TX8: • Unpack the LAN Master ™ TX8 Hub.
LAN Master™ TX8 100BASE-TX 8-Port Hub 6 9 Installing LAN Master™ TX8 in 19-inch Rack NOTE: Optionally, the LAN Master ™ TX8 can be installed on a table or other flat, stable surface. NOTE: The LAN Master ™ TX8 is shipped with attached brackets for standard 19-inch rack installation.
LAN Master™ TX8 100BASE-TX 8-Port Hub 8 7 Optionally Cascading T wo LAN Master™ TX8 Hubs Two LAN Master ™ TX8 hubs can be cascaded using the two connections at the front of each hub that are labelled ‘ Port 8 ’ . To cascade two LAN Master ™ TX8 hubs: 1.
An important point after buying a device Milan Technology HB-E-TX-8 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Milan Technology HB-E-TX-8 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Milan Technology HB-E-TX-8 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Milan Technology HB-E-TX-8 you will learn all the available features of the product, as well as information on its operation. The information that you get Milan Technology HB-E-TX-8 will certainly help you make a decision on the purchase.
If you already are a holder of Milan Technology HB-E-TX-8, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Milan Technology HB-E-TX-8.
However, one of the most important roles played by the user manual is to help in solving problems with Milan Technology HB-E-TX-8. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Milan Technology HB-E-TX-8 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
