Instruction/ maintenance manual of the product MIL-S801XX MiLAN
Go to page of 14
User’s Manual for MIL-S801XX.
Regulatory Approval - FCC Class A - UL 1950 - CSA C22.2 Number 950 - EN60950 - CE - EN55022 Class A - EN55024 Canadian EMI Notice This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.
C ontents 1. Introduction 1 Features 2 Package Contents 2 2. Hardware Description 4 Front Panel 4 MIL-S801XX 9 port switch with SC fiber port 4 MIL-S801XX 9 port switch with SC (Single-mode) fiber por.
1. Introduction MiLAN’s MIL-S801XX switch with a fiber port is a compact desktop size switch, which is an ideal solution for many network users. It provides wire-speed, Fast Ethernet switching function that allows high- performance, low-cost connections.
Features • Eight 10/100Mbps Fast Ethernet UTP switch ports • One 100Mbps multi-mode port (SC, ST, MT-RJ, VF-45) or single-mode SC port • One DIP-switch to select fiber port full-duplex or half-d.
2. Hardware Description This Section mainly describes the hardware of the MIL-S801XX switch . The switch is compact (10 inches) with eight 10/100BASE-TX UTP ports plus one 100BASE-FX fiber port. The physical dimensions of the MIL-S801XX switch are: 250mmx 132mmx 37mm (L 9.
MIL-S801XX switch with ST fiber port Figure 2-3. The Front Panel of the MIL-S801XX switch with ST fiber port MIL-S801XX switch with MT-RJ fiber port Figure 2-4. The Front Panel of the MIL-S801XX switch with MT-RJ fiber port MIL-S801XX switch with VF-45 fiber port Figure 2-5.
LED Indicators The following table provides descriptions of the LED statuses and meaning. They provide a real-time indication of systematic operation status. Power On Green Power On On Green The port is successfully connecting with the device. Blinks The port is receiving or transmitting data.
Rear Panel The 3-pronged power plug is located at the Rear Panel of the 9-Port switch as shown in Figure 2-6. The switch will work with AC in the range 100-240V AC, 50-60Hz. Figure 2-6 The Rear Panel of the MIL-S801XX switch Desktop Installation Set the switch on a sufficiently large flat space with a power outlet nearby.
3.Network Application This section provides two samples of network topology in which the switch is used. In general, the MIL-S801XX switch is configured for use as a desktop or segment switch. The MIL-S801XX switch networks PCs, workstations, and servers to each other by connecting these devices directly to the switch.
Segment Application Any of the RJ-45 ports on the MIL-S801XX switch can connect with other switches or Hubs to interconnect small workgroups to form larger switched networks. You can also use fiber ports to connect switches. The distance between two switches via fiber cable can be up to 2Km or up to 60Km (SC single-mode fiber connector).
4.Trouble Shooting This troubleshooting section is intended to help you solve the most common problems on the MIL-S801XX switch. The switch can be easily monitored through panel indicators to assist in identifying problems. This section describes common problems you may encounter and where you can find possible solutions.
5.Technical Specifications This section provides the specifications for the MIL-S801XX switch Specifications Standards Compliance IEEE 802.3 10BASE-T Ethernet, IEEE 802.
A Division of Digi International.
An important point after buying a device MiLAN MIL-S801XX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MiLAN MIL-S801XX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MiLAN MIL-S801XX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MiLAN MIL-S801XX you will learn all the available features of the product, as well as information on its operation. The information that you get MiLAN MIL-S801XX will certainly help you make a decision on the purchase.
If you already are a holder of MiLAN MIL-S801XX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MiLAN MIL-S801XX.
However, one of the most important roles played by the user manual is to help in solving problems with MiLAN MIL-S801XX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MiLAN MIL-S801XX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
