Instruction/ maintenance manual of the product mil-s2400s MiLAN
Go to page of 4
90000396_ C MIL-S2400S User ’ s Guide The MIL-S2400S switch is a twenty four port switch that can be used to build high-performance switched workgroup networks. This switch is a store-and-forward device that offers low latency for high-speed networking.
Regulatory Approval - FCC Class A - UL 1950 - CSA C22.2 Number 950 - CE EN55022 Class A EN55024 Canadian EMI Notice This Class A digital apparatus meets all the requirement s of the Canadian Interference-Causing Equipment Regulations.
T roubleshooting This section is intended to help you solve the most common prob- lems on the MIL-S2400S switch. Incorrect connections • Faulty or loose cables Look for loose or obviously faulty connections. If they appear to be OK, make sure the connections are snug.
Hardware Description Front Panel The Front Panel of the MIL-S2400S switch consists of 24 10/100Base-TX RJ-45 ports The LED Indicators are also located on the front panel of the switch. RJ-45 Ports (Auto MDI/MDIX) : 24 10/100 auto-sensing for 10Base-T or 100Base-TX connections.
An important point after buying a device MiLAN mil-s2400s (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MiLAN mil-s2400s yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MiLAN mil-s2400s - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MiLAN mil-s2400s you will learn all the available features of the product, as well as information on its operation. The information that you get MiLAN mil-s2400s will certainly help you make a decision on the purchase.
If you already are a holder of MiLAN mil-s2400s, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MiLAN mil-s2400s.
However, one of the most important roles played by the user manual is to help in solving problems with MiLAN mil-s2400s. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MiLAN mil-s2400s along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
