Instruction/ maintenance manual of the product MIL-S16000T MiLAN
Go to page of 16
MIL-S16000T 16-Port 1000BASE-T Gigabit Ethernet Switch USER GUIDE.
Regulatory Approval - FCC Class A - UL 195 0 - CSA C22.2 No. 950 - EN60950 - CE - EN55022 Class A - EN55024 Canadian EMI Notice This Class A digital apparatus meets all the requirement s of the Can adian Interference-Causing Equipment Regulations.
Table of Contents 1. Introduction Gigabit Ethernet T echnology Switching T echnology Features Package Content s 2. Hardware Description Front Panel Rear Panel LED Indicators 3. Hardware Inst allation Desktop Installation Rack mounted Installation Power On 4.
1. Introduction Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing the same packet structure, format, and support for CSMA/CD pr otocol, full duplex, flow co.
to users on a local area network. A s witch increases capacity and decreases network loading by making it possible for a local area network to be divided into different segments which do not compete with each other for network transmission capacity, giving a decreased load on each.
Package Contents Unpack the content s of the package and verify them against the checklist below . MIL-S16000T Gigabit Ethernet Switch AC Power Cord Rack Mount Ear s Four Adhesive Rubber Feet User's Guide W arranty Card If any item is missing or damaged, please cont act your local dealer for service.
2. Hardware Description Front Panel The front panel of the Gigabit Ethernet S witch consists of 16 1000BASE-T Gigabit Ethernet ports and the LED Indicators for t he unit, which displays the conditions of the Gigabit Ethernet Switch and the status of the network.
LED Indicators The LED indicators of the Gi gabit Ethernet Switch provide a real-time indication of system operating statuses. There are three LED-indicato rs for each Gigabit Ethernet port and one Power LED for the Unit.
3. Hardware Installation Desktop Installation Set the switch on a sufficiently large fl at space with a power outlet nearby. The surface where you put your switch shoul d be clean, smooth, le vel, and sturdy. Provide enough clearance around the switch to allow attachment of cables, power cord and air circulation.
Rack-mounted Installation The MIL-S16000T comes with a rack-moun ted kit and can be mounted in an EIA standard size, 19-inch rack. The Switch ca n be placed in a wiri ng closet with other equipment. Perform the following steps to rack mount the switch: A.
Power On Connect the power cord to the power so cket on the rear panel of the Switch. Connect the other end of the cord to an appr opriate power outlet. Press the power On/Off switch to the on position and check the power in dicator on the front panel to see if power is properly supplied.
4. Technical Specifications General Specifications S tandards: IEEE 802.3ab 1000BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3 10BASE-T IEEE 802.3x Flow Control Protocol: CSMA/CD Data T ransfer Rate: 10Mbps.
Performance Specifications T ransmission Method: S tore-and-forward RAM Buffer: 272K Bytes per device Filtering Address T able: 4K MAC address per device Packet Filtering/Forwarding Rate: Full wire sp.
Appendix A: Regulatory Information FCC Warning This equipment has been tested a nd fou nd to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. Th ese limits are designed to provide reasona bl e protection against harmful interferen ce when the equipment is operated in a commercial environment.
condition is not achieved due to uneven mechani cal loading. d) Circuit Overloading- Consid eration should be given to the connection of the equipment to the supply circuit and the ef fect that overloading of ci rcuits might have on over current protection a nd supply wiring.
90000425 Rev A 13.
An important point after buying a device MiLAN MIL-S16000T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MiLAN MIL-S16000T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MiLAN MIL-S16000T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MiLAN MIL-S16000T you will learn all the available features of the product, as well as information on its operation. The information that you get MiLAN MIL-S16000T will certainly help you make a decision on the purchase.
If you already are a holder of MiLAN MIL-S16000T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MiLAN MIL-S16000T.
However, one of the most important roles played by the user manual is to help in solving problems with MiLAN MIL-S16000T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MiLAN MIL-S16000T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
