Instruction/ maintenance manual of the product CCSF30XX-100 MiLAN
Go to page of 7
*Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network. Part Number Port One - Copper Port Two - Duplex Fiber-Optic CCSCF3011-100 75 ohm coax (BNC) ST, 1300 nm multimode 2 km (1.2 miles)* CCSCF3013-100 75 ohm coax (BNC) SC, 1300 nm multimode 2 km (1.
2 CCSCF30xx-10x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 * Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network. (TX) = transmit (RX) = receive ** CCSCF3029 -100 and - 101 are intended to be installed in the same network.
4 CCSCF30xx-10x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Install the Slide-In-Module CAUTION: Wear a grounding device and observe electrostatic discharge precautions when installing the CCSCF30xx-10x slide-in-module media converter.
CCSCF30xx-11x 6 Oper ation After installation, the media converter should function without operator intervention. Use the status LEDs to monitor the media converter operation in the network. SDC Green on The coax link is up. Green flashing The coax link is in loop-back mode.
8 CCSCF30xx-10x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Cable Specifications -- Continued CCSCF3039-100 1300 nm multimode Fiber-optic Transmitter Power: min: -19.0 dBm max: -14.0 dBm Fiber-optic Receiver Sensitivity: min: -30.
10 CCSCF30xx-10x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Bit Error T est Unit Fiber Copper C opper Local Converter Remote Converter Bit Error T est Unit Remote De.
Trademark Notice All trademarks and registered trademarks are the property of their respective owners. Copyright Restrictions © 2001, 2004 - 2005 Transition Networks.
An important point after buying a device MiLAN CCSF30XX-100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MiLAN CCSF30XX-100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MiLAN CCSF30XX-100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MiLAN CCSF30XX-100 you will learn all the available features of the product, as well as information on its operation. The information that you get MiLAN CCSF30XX-100 will certainly help you make a decision on the purchase.
If you already are a holder of MiLAN CCSF30XX-100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MiLAN CCSF30XX-100.
However, one of the most important roles played by the user manual is to help in solving problems with MiLAN CCSF30XX-100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MiLAN CCSF30XX-100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
