Instruction/ maintenance manual of the product T1323C Miele
Go to page of 36
Operating Instructions Condenser Dr y er T 1323 C T o prevent accidents and machine damage read these instructions before installation or use. UV M.-Nr .
IMPORT ANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Before loading the dry er . . .
, W ARNING - T o reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: Read all instructions before using the appliance.
GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, gr ounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug.
a e- "PROGRAMS" b uttons For selecting a drying program. b "OPTIONS" buttons For selecting a drying option. c "DR YNESS" button For selecting the dryness level of finished laundry . d "ST A TUS" display Shows the current cycle of the drying program.
The dryer must be correctly installed and connected before the first use. Please refer to the "Installation Instructions". ^ Before using for the first time clean the drum with a cloth. Before drying, check fabric care labels for special drying instructions.
1. T urn on the dryer and load the laundry ^ Press the "On/Of f" button to turn on the dryer . ^ Press the "Door" button to open the door . ^ Load the laundry loosely into the drum. ^ Make sure the lint filters ar e in place. ^ Close the door with a firm swing - do not push it shut.
Program F abric Note Normal A vailable drying options: T urbo, Gentle, Anti-crease Extra Dry Multi-layer fabrics, mixed loads of sturdy cottons, e.g. jeans, towels. The "Extra dry" program should not be selected for jersey materials. Items may shrink.
3. Select a drying option (if needed) ^ A drying option can be selected or deselected with each press of the button. OPTIONS T urbo Fast drying for sturdy fabrics with increased temperatur e and a reduced program length. Gentle For drying delicate fabrics slowly at a lower temperature.
4. Select the dryness level The dryness level can be selected in the "Normal" and "Wrinkle-free" programs. (The dryness level of the other programs cannot be adjusted.) ^ Press the selection button until the desired indicator illuminates.
6. Start the program ^ Press the "Start/Stop" button. Once the program starts, the current cycle of the program will be indicated in the "ST A TUS" display . 7. At the end of a program The "Anti-crease/End" indicator will light at the end of a program and the buzzer will sound if it was selected.
Canceling or changing a program ^ Press and r elease the "Start/Stop T " button to stop the drying program. T o continue drying: ^ Select the new program by pr essing the e or - button. ^ Select any desired options. ^ Select a dryness level (available in the "Normal" and "Wrinkle-free" programs).
Child lock When activated, the child lock prevents the dryer from being operated by locking the control panel functions. The dryer can be tur ned on but not started. The "Child lock" indicator will flash. The door can be opened. T o activ ate the child lock 1.
Cleaning the lint filter The lint filter must be cleaned after every program. ^ Open the door and remove the lint filter by gently lifting it upwards. ^ Wipe the lint off the filter with your hand (do not use any sharp objects!) ^ Remove the lint from the door frame lint filter with your fingers.
Cleaning the exterior and the control panel , T o reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord befor e perfor ming maintenance. Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the dryer .
Emptying the condensed water container Depending on the installation, the condensed water will either be pumped to a drain or collected in the condensed water container , located in the upper left corner of the machine. The container holds approximately 1 gallon of water .
Quic k Guide Remov e this guide f or easy ref erence Please read all instructions, especially the "Important Safety Instructions", before using the dryer .
1.T urn on the dr yer and load the laundry ^ Press the "On/Of f" button to turn on the dryer . ^ Press the "Door" button to open the door . ^ Load the laundry into the drum. Make sure that ther e is enough space in the drum for clothes to tumble freely .
4. Select the dr yness le vel ^ Press the selection button until the desired indicator illuminates. 5. Select the buzzer (if desired) 6. Star t the program ^ Press the "Start/Stop" button. 7. At the end of a program The "Anti-crease / End" indicator will light.
Program When to use Note Normal Available drying options T urbo, Gentle, Anti-cr ease Extra Dry For laundry to be folded and shelved immediately , e.g. jeans, towels. The "Extra Dry" program should not be selected for jersey materials. Items may shrink.
Cleaning the condenser , T o reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord befor e perfor ming maintenance. ^ Clean the condenser every 6 months.
Rinsing the condenser ^ Rinse the condenser along the left side with warm water . ^ Rinse the condenser from the fr ont with warm water . ^ Check the condenser for visible soiling. Rinse the condenser until clean. ^ Place the condenser lengthwise on a towel to air dry .
Changing the light bulb , T o reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord befor e perfor ming maintenance. ^ Open the door . The bulb cover is located along the upper rim of the drum opening.
What if the dryer will not run? P ossible fault Fix The "Start/Stop" button was not pressed. Make sure the dryer is on. Press the "Start/ Stop" button to begin the dr ying program. The circuit br eaker tripped or the dr yer is unplugged.
What if the "Filter/V ent" fault indicator is lit? P ossible fault Fix The lint filter is clogged. Clean the lint filters. See "Dryer care".
In the event of a fault you cannot fix yourself, please contact the Miele T echnical Service Department U 1-800-999-1360 techserv@mieleusa.com V 1-800-565-6435 service@miele.ca When contacting T echnical Service, please quote the model and serial number of your appliance.
Installation Instr uctions.
Installation, repair and maintenance work should be perfor med by a Miele authorized service technician. Work by unqualified persons could be dangerous and could void the warranty .
Disposal of the packing materials The cardboar d box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. T o prevent suf focation of children, ensure that any plastic wrappings, bags, etc.
The tumble dryer can also be placed on top of a Miele washing machine for a stacked installation. An appropriate stacking kit is requir ed. The stacking kit is available from your Miele dealer or the Miele T echnical Service Department. , Installation of the stacking kit must be perfor med by a Miele authorized technician.
GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, gr ounding will reduce the risk of electric shock by providing a path of least r esistance for electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug.
Front vie w a Power cord with plug b Condensed water container c Control panel d Door e Access panel to condenser f Four height adjustable feet g Optional drain hose: An alternative to using the condensed water container is to drain condensed water into a sink, standpipe or gully .
Installation tips An airflow gap of 3 / 8 " (10 mm) must be provided between the machine and the floor . This air flow gap must not be blocked by a toekick or thick piled carpets.
External water drain When drying is in progress, condensed water is pumped into the condensed water container through the drain hose at the back of the dryer . The condensed water can also be drained directly if the machine is installed near a sink or a stand pipe so that the condensed water container does not have to be emptied.
If the external drain is no longer used , Do not push the drain hose back into the dryer . It could become kinked and damage the dryer . ^ Loop the drain hose up. ^ Use a suitable cable tie to secure the looped hose to the back of the dryer or store the looped hoses behind the dryer .
All rights reserved / 4804 M.-Nr . 06 002 890 / 04.
An important point after buying a device Miele T1323C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Miele T1323C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Miele T1323C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Miele T1323C you will learn all the available features of the product, as well as information on its operation. The information that you get Miele T1323C will certainly help you make a decision on the purchase.
If you already are a holder of Miele T1323C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Miele T1323C.
However, one of the most important roles played by the user manual is to help in solving problems with Miele T1323C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Miele T1323C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
