Instruction/ maintenance manual of the product KM5822 Miele
Go to page of 68
Operating and installation instructions Ceramic hobs KM 5801 KM 5813 / KM 5816 KM 5822 To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time.
2.
Guide to the appliance .............................................5 Models ...........................................................5 KM 5801 .......................................................5 KM 5813 / KM 5816 ..............................
Safety features ...................................................3 5 Safety lock / System lock ...........................................3 5 Stop and Go ......................................................3 6 Safety switch-off ...................
Models KM 5801 abcd Single circle zones e Control panel Guide to the appliance 5.
KM 5813 / KM 5816 a Double circle zone bd Single circle zones c Extended cooking zone e Control panel Guide to the appliance 6.
KM 5822 a Double circle zone bd Single circle zones c Extended cooking zone e Control panel Guide to the appliance 7.
Control panel Guide to the appliance 8.
Sensors for a Switching the hob on and off b Numerical keypad - For setting the power level - For setting the time c Safety lock d Switching on the outer circle of a double circle/extended zone (depen.
Cooking zones Zone KM 5801 C in cm Rating in watts for 230 V y 18.0 1800 w 14.5 1200 x 21.0 2200 z 14.5 1200 Total: 6400 Zone KM 5813 / KM 5816 C in cm Rating in watts for 230 V y 12.0 / 21.0 750 / 2200 w 14.5 1200 x 17.0 / 17.0 x 26.5 1500 / 2400 z 14.
This appliance complies with all relevant local and national safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time.
Safety with children ~ Use the safety lock to prevent children operating the appliance or altering the settings. ~ Keep children away from the appliance at all times. It is not a toy! To avoid the risk of injury, do not allow them to play with it or use the controls.
Technical safety ~ Before installation, check the appliance for visible signs of damage. Do not install and use a damaged appliance. It could be dangerous.
~ Do not connect the appliance to the mains electricity supply by a multi-socket adapter or an extension lead. These do not guarantee the required safety of the appliance (e.g. danger of overheating). ~ Do not use the hob if it is faulty, or if the ceramic surface is cracked, chipped or damaged in any way.
~ Do not flambé under a cooker hood. The flames could set the cooker hood on fire. ~ Do not use the appliance as a resting place for anything else. When the appliance is switched on either deliberately or by mistake, or when there is residual heat present, there is the risk of metal objects heating up, with a danger of burning.
~ When using an electrical appliance, e.g. a hand-held food blender, near the appliance, ensure that the cable of the electrical appliance cannot come into contact with the hot appliance. The insulation on the cable could become damaged, giving rise to an electric shock hazard.
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and should be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children.
Please stick the extra data plate for the appliance supplied with this documentation in the space provided in the "After sales service, data plate" section of this booklet. Cleaning for the first time ^ Remove any protective wrapping and adhesive labels.
Single circle cooking zones have one heating element, whilst double circle (vario) cooking zones and extended zones have two. Depending on model, the heating elements may be separated by an isolating ring.
How the hob is operated The hob is equipped with electronic sensor controls which react to finger contact. To operate the hob, touch the relevant sensor. Each time you touch a sensor, an audible tone sounds. In order to set or alter a power level or the time, the cooking zones and the timer must be "active".
Switching on The hob must be switched on before any of the zones can be used. Do not leave the appliance unattended whilst it is being used. To switch the hob on ^ Touch the s sensor. 0 will appear in each of the cooking zone displays. If no further entry is made, the hob will switch itself off after a few seconds for safety reasons.
Power level range The appliance is delivered with 9 power levels programmed in. If you wish to fine tune a setting, you can extend the power level range (see "Programming"). The intermediate setting will be represented by an illuminated dot next to the number.
Auto heat-up When Auto heat-up has been activated, the cooking zone switches on automatically at the highest power setting and then switches to the continued cooking setting selected. The heat-up time depends on which continued cooking setting has been chosen (see chart).
Continued cooking setting* Heat-up time in minutes and seconds (approx.) 1 1:2 0 1 . 2:0 0 2 2:4 5 2 . 3:2 5 3 4:0 5 3 . 4:4 5 4 5:3 0 4 . 6:1 0 5 6:5 0 5 .
Switching the outer circle of a double circle / extended zone on and off When cooking with larger pans, the outer circle of a double circle/extended zone (see "Guide to the appliance") can be switched on to provide an extended cooking area.
Switching off and residual heat indicators Switching off a cooking zone ^ Touch the sensor for selecting the cooking zone you want twice. A 0 will flash in the cooking zone display for a few seconds. If the cooking zone is still hot, the residual heat indicator will then appear in the display.
– Most suitable The best pans for use on a ceramic hob are those with a thick base which is very slightly concave when cold. When heated, the base flattens to rest evenly on the hob, optimising the conduction of the heat.
– Check that the diameter of the pan base is wide enough for the cooking zone so that heat is not lost unnecessarily. too small suitable – Use a pan lid whenever possible to minimise heat loss. uncovered covered – Select a smaller pan when cooking small quantities.
The hob must be switched on to use the timer. The timer can be used for two different functions: – to set the minute minder – to set a cooking zone to switch off automatically. You can select a time from 1 minute ( 01 ) to 9 hours ( 9^ ). A time of up to 99 minutes is set and displayed in minutes.
Minute minder To set the minute minder time Minutes Example: You want to set 15 minutes. ^ Switch the hob on. ^ Touch the m sensor. 00 will appear in the timer display. The 0 on the right will flash. Enter the tens first and then the units. ^ Touch the number on the numerical keypad which corresponds to the tens position (1 in this case).
Hours Whole hours are set by touching the relevant number on the numerical keypad. Half hours are set by touching the area between the relevant two numbers. Example: You want to set 2 hours 30 minutes. ^ Switch the hob on. ^ Touch the m sensor. 00 will appear in the timer display.
To change the minute minder time ^ Touch the m sensor. ^ Set the time you want, as described above. To delete the minute minder time ^ Touch the m sensor until 00 appears in the timer display.
To switch a cooking zone off automatically You can set a time at the end of which a cooking zone will switch off automatically. All the cooking zones can be programmed at the same time.
To use both timer functions at the same time The minute minder and automatic switch-off functions can be used at the same time. If you have programmed in one or more switch-off times, and would like t.
Safety lock / System lock Keep children away from the hob for their own safety. Your appliance is equipped with a safety lock to prevent the hob and the cooking zones being switched on or any settings being altered. The safety lock is activated when the hob is switched on.
Stop and Go Your appliance has a Stop and Go feature which, when activated, reduces the power of all cooking zones in use to power level 1 . When Stop and Go activated, the cooking zone power levels and the setting of the timer cannot be altered and the hob can only be switched off.
Safety switch-off Safety switch-off with an over-long cooking time If one of the cooking zones is heated for an unusually long period of time (see chart) and the power level is not altered, the hob will switch itself off automatically and the relevant residual heat indicator will light up.
Overheating protection Each zone is equipped with overheating protection (internal temperature limiter). This switches off the heating elements in the cooking zone before the ceramic surface overheats.
For Miele branded cleaning and conditioning products see "Optional accessories". , Do not use a steam cleaning appliance to clean this appliance. The steam could reach electrical components and cause a short circuit. The appliance should be cleaned after each use.
Do not use washing-up liquid to clean the ceramic surface. Washing-up liquid will not remove all soiling and deposits. It will form an invisible coating which will cause permanent discolouration of the ceramic surface. Clean the hob regularly with a suitable ceramic hob cleaner.
You can change the default settings of programme options (see chart). Several settings can be altered in succession. After programming mode has been called up, P (Programme) and S (Status) will appear in the timer display. On hobs with 3 cooking zones, an additional indicator will appear at the rear left.
Programme* Status** Setting P0 0 Demonstration mode and factory default settings S 0 Demonstration mode on (after the hob is switched on, " dE " will appear in the timer display for a few seconds. S1 Demonstration mode off S 9 Factory default settings reinstated P0 2 Power level range S0 9 power levels/settings (1, 2, 3 .
Programme* Status** Setting P0 7 System lock S0 Manual activation of the system lock S 1 Automatic activation of the system lock P0 8 Auto heat-up S 0 Off S1 On P1 1 Outer circle of the front left coo.
With the help of the following notes, minor faults in the performance of the appliance, some of which may result from incorrect operation can be put right without contacting the Service Department.
Problem Possible cause Remedy After the hob is switched on " dE " appears in the timer display for a few seconds. The cooking zones do not heat up. The appliance is in demonstration mode. Deactivate demonstration mode (see "Programming").
Problem Possible cause Remedy The hob switches off while it is in use, an F flashes in the timer display and a tone sounds. One or more of the sensors have been covered, e.g. by finger contact, food boiling over or by an object such as an oven glove. Clean the control panel or remove the obstruction (see "Safety switch-off").
Problem Possible cause Remedy The sensors are over-sensitive or do not react at all. The sensitivity level of the sensors has changed. Make sure that there is no direct light (from the sun or from an artificial source) falling onto the hob and that the surrounding area is not too dark.
You can test the power level of a cooking zone by measuring how long it takes to bring a specific amount of water to the boil. The pan (and lid) must be stainless steel or enamel. The diameter of the pan must match the cooking zone, and be flat-bottomed or slightly concave.
C Cooking zone in cm Rating in watts for 230 V Quantity of water in litres Time* in minutes 10.0 600 0.5 11.0 12.0 700 / 750 1.0 13.0 14.5 1000 / 1100 1.0 9.0 14.5 1200 1.0 8.5 14.5 1350 1.0 8.0 17.0 1500 1.5 9.5 18.0 1250 1.5 11.0 18.0 1700 / 1800 1.
Miele offer a comprehensive range of useful accessories as well as cleaning and conditioning products for your appliance. These products can be ordered online: or from Miele (see back cover for contact details) Ceramic and stainless steel hob cleaner 250 ml Removes heavy soiling, limescale deposits and aluminium residues.
The appliance must only be installed and connected to the electricity supply by a suitably qualified and competent person in strict accordance with current national and local safety regulations. Fit the wall units and extractor hood before fitting the hob to avoid damaging the appliance.
Safety distance above an interim shelf It is not necessary to fit an interim shelf underneath the hob. If an interim shelf is fitted underneath the hob, a minimum safety distance of 110 mm must be maintained between the top of the worktop and the top of the interim shelf.
Safety distances to the sides and back of the hob Ideally the hob should be installed with plenty of space on either side. There may be a wall at the rear and a tall unit or wall on one side (right or left) (see illustrations). a Minimum distance of 50 mm between the back of the worktop cut-out and the rear edge of the worktop.
Safety distance when installing the appliance near a wall with additional niche cladding A minimum safety distance must be maintained between the worktop cut-out and any niche cladding to protect it from heat damage. If the niche cladding is made from a combustible material (e.
Hob with frame or bevelled edges Seal between the hob and the worktop The sealing strip under the edge of the top part of the appliance provides a sufficient seal for the worktop. The hob must not be sealed with sealant (e.g. silicone). This could result in damage to the hob or the worktop if the hob ever needs to be removed for servicing.
KM 5801 a Spring clamps b Casing depth c Building-in depth including mains connection box. Mains connection cable, L = 1440 mm d Front Building-in dimensions 56.
KM 5813 a Spring clamps b Casing depth c Building-in depth including mains connection box. Mains connection cable, L = 1440 mm d Front Building-in dimensions 57.
KM 5816 a Spring clamps b Casing depth c Building-in depth including mains connection box. Mains connection cable, L = 1440 mm d Front e Safety bracket Building-in dimensions 58.
KM 5822 a Spring clamps b Casing depth c Building-in depth including mains connection box. Mains connection cable, L = 1440 mm d Front Building-in dimensions 59.
The exact positions of the spring clamps, and the safety brackets for hobs with bevelled edges, are shown in the building-in dimensions for the particular hob. Hobs with bevelled edges: The sealing strip will ensure that the hob sits securely in the cut-out.
Granite and marble worktops You will require double-sided tape and silicone (not supplied). ^ Fix the spring clamps (or safety brackets for hobs with bevelled edges) in place using double-sided tape c . The spring clamps must rest on the top edge of the cut-out and the safety brackets must be flush with the top edge of the cut-out.
Installing the hob ^ Feed the hob connection cable down through the cut-out. ^ Position the hob on the spring clamps. ^ Using both hands, press down evenly on the sides of the hob until it clicks into position. When doing this, make sure that the seal under the hob sits flush with the worktop on all sides.
All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current local and national safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous.
The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system, which complies with current local and national safety regulations.
In the event of any faults which you cannot remedy yourself, or if the appliance is under guarantee, please contact: – Your Miele dealer, or – the Miele Service Department (see back cover for address). Please note that telephone calls may be monitored and recorded to improve our service.
66.
67.
Alteration rights reserved / 0811 M.-Nr. 07 570 890 / 02.
An important point after buying a device Miele KM5822 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Miele KM5822 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Miele KM5822 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Miele KM5822 you will learn all the available features of the product, as well as information on its operation. The information that you get Miele KM5822 will certainly help you make a decision on the purchase.
If you already are a holder of Miele KM5822, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Miele KM5822.
However, one of the most important roles played by the user manual is to help in solving problems with Miele KM5822. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Miele KM5822 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
