Instruction/ maintenance manual of the product KM410 Miele
Go to page of 16
Installation Instr uctions KM 400 Electr ic Cooktop KM 402 / KM 403 F r y er KM 408-1 Contact Gr ill KM 410 / KM 411 Electr ic Barbecue T o pr event accidents and machine damage, read these instructions before installation or use.
2.
IMPORT ANT SAFETY INSTR UCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety distance above the appliances .
Note to the installer: Please leave this instruction book with the consumer for the local electrical inspector’ s use. Installation The minimum distances given in these Installation Instructions must be observed in order to ensur e safe operation. Failure to do so incr eases the risk of fire.
Cooktops should not be installed above a dishwasher , washer , dryer , freezer or r efrigerator . The high temperatures radiated downwar ds from the cooktops could damage these appliances. This equipment has not been designed for maritime use or for use in mobile installations such as aircraft or r ecreational vehicles.
KM 400 / KM 408-1 a Clamps b Please allow an additional 3 / 4 " (18 mm) depth below the cooktop for clearance of the power cord. Appliance dimensions 6.
KM 402 / KM 403 a Clamps Appliance dimensions 7.
KM 410 / KM 411 a Clamps Appliance dimensions 8.
Cutting out the countertop All Miele combisets have the same length and width. Make sure that ther e is enough room beneath the countertop to allow for the depth of the various appliances. When installing a KM 402 / KM 403 or KM 410 / KM 411 remember to allow clearance for the drain valve that will be located in the cabinet beneath the appliances.
Laying out the support bars and clamps a Clamps b Support bars This illustration shows the layout for 3 combisets, their respective support bars, b , and the 14 spring clamps, a , requir ed for correct installation.
Securing the support bars W ood or Corian counter tops ^ Arrange the bars, b , as shown in the illustration ^ Drill 1 / 16 " (1.5 mm) pilot holes through the brackets and secure them using the supplied screws. ^ Fill the gap, c , between the bars and the countertop using the supplied silicon sealant.
Locking the appliance into place Make sure the cooktops ar e aligned correctly befor e setting them into the countertop. Once the spring clamps are engaged, a special tool is requir ed to release the cooktop fr om the clamps. ^ Guide the power cord thr ough the cut out and connect the appliance to the electrical supply .
Important The cooktop must not be permanently sealed into the countertop when installed. The sealing strip under the edge of the cooktop provides a suf ficient seal for the countertop. If the cooktop is sealed into position, the countertop or the appliance may be damaged if the cooktop needs to be removed for maintenance or service.
, W ARNING: Disconnect the appliance from the main power supply before servicing. T o r educe the risk of electric shock, make sure that the appliance is properly gr ounded after installation. T o guarantee the electrical safety of this appliance; continuity must exist between the appliance and an effective gr ounding system.
15.
Alterations rights reserved / 0705 M.-Nr . 05 060 863 / 01 e n-U S.
An important point after buying a device Miele KM410 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Miele KM410 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Miele KM410 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Miele KM410 you will learn all the available features of the product, as well as information on its operation. The information that you get Miele KM410 will certainly help you make a decision on the purchase.
If you already are a holder of Miele KM410, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Miele KM410.
However, one of the most important roles played by the user manual is to help in solving problems with Miele KM410. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Miele KM410 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
