Instruction/ maintenance manual of the product KM 5773 Miele
Go to page of 52
Operating and Installation Instructions Ceramic Cooktop with Induction KM 5773 To prevent accidents and appliance damage, read these instructions before installation or use.
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Guide to the cooktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Cooktop .............................
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Frequently asked questions .
READ THE OPERATING INSTRUCTIONS CAREFULLY BEFORE USING THE COOKTOP WARNING - This appliance is intended for residential cooking only. When using your appliance follow basic safety precautions includin.
Use ~ Only use the cooktop for residential cooking, and for the purposes described in this manual. Other uses are not permitted and can be dangerous. ~ Persons who lack physical, sensory or mental abilities, or experience with the appliance should not use it without supervision or instruction by a responsible person.
Injury prevention ~ Children should not be left unattended in an area where the cooktop is in use. Never allow children to sit or stand on any part of the cooktop. Caution: Do not store items of interest to children in cabinets above the cooktop. Children climbing on the cooktop to reach these items could be injured.
~ Do not heat unopened containers. Built-up pressure may cause the container to burst and result in injury. ~ Before removing pots and pans be sure to turn off the burners. ~ To prevent burns and breathing difficulty, allow the cooktop to cool before cleaning.
Damage protection ~ Never place hot pots or pans on the touch controls, this may damage the electronics. ~ Do not drop anything on the ceramic surface of the cooktop. Even lightweight objects may cause damage. ~ Do not use pots or pans with pronounced edges or ridges on the ceramic cooktop.
Appliance safety ~ In the event of any damage to the appliance, it must be turned off immediately and disconnected from the main power supply. Contact Miele’s Technical Service Department. Do not use the appliance until it has been repaired. Ensure power is not supplied to the appliance until repair work is completed.
Cooktop abde Burners with single booster c Burner with double booster Guide to the cooktop 10.
Control panel Touch controls a Booster On/Off b Power level c Burner On/Off d Timer On/Off, switch between functions and select a burner f Child Safety Lock g Cooktop On/Off Indicators e Child Safety .
Burner display a Booster indicator b Display: - = Burner is ready for use 0 = Burner is turned on 1 to 12 = Power level # = Residual heat ß = Missing or unsuitable cookware (see "Induction".
Timer display a Indicator for relevant burner, e.g. rear right burner b Time display Burner data Burner minimum to maximum diameter * Rating in watts 208 V** 240 V** y 6 5 / 16 "-9 " 16 -23 .
How it works An induction coil is located under each burner. When a burner is switched on, this coil creates a magnetic field which impacts directly on the base of the pan and heats it up. The burner itself is heated indirectly by the heat given off by the pan.
Noises When using an induction burner, the following noises can occur in the pan, depending on what it is made of and how it is constructed. – Higher power settings may cause a buzz. This will decrease or cease altogether when the power setting is reduced.
Cookware Suitable pans include: – stainless steel pans with a magnetic base – enameled steel pans – cast iron pans Unsuitable pans: – stainless steel pans without a magnetic base – aluminum .
Clean the cooktop ^ Before using for the first time, clean the appliance with a damp cloth and dry with a soft cloth. Heat the cooktop Metal components of the cooktop have a protective coating which may give off a slight odor the first time the appliance is heated.
Automatic reset To ensure the cooktop functions properly the touch controls will automatically reset: – when the cooktop is connected to the power supply, – if there is an interruption to the power supply, and – during use in response to changing light conditions.
Touch controls The control panel is equipped with electronic sensors. They respond to a finger touch. To operate the burners, simply touch the corresponding sensor area(s). Each time a command is registered, a signal will be heard. Be sure to touch only the desired sensor area and keep the control panel clean and clear.
Settings Use for Power level * standard factory settings (12 power levels) extended** settings (23 power levels) Melting butter, chocolate, etc. Dissolving gelatine 1-2 1-2 . Thickening sauces containing egg yolk and/or butter Warming small quantities of food/liquid Cooking rice Thaw frozen vegetables (blocks) 3 3-3 .
Auto-heat When Auto-heat has been activated, the burner switches on automatically at the highest setting and then switches to the continued power level which was selected. The "heat-up" time depends on which continued power level has been chosen (see table).
To activate Auto-heat ^ Turn the burner on. ^ Touch the - sensor until the desired power level is displayed, e.g. 3 . 12 segments will light in the lighting circle during the auto-heat time. After the auto-heat time has elapsed only the number of segments will light which correspond to the selected power level.
Booster function Each burner is equipped with a booster function to temporarily increase the power level. When the booster function is on, the burners increase to power level 12 for 10 minutes. This boost is intended for quickly bringing large quantities of water to the boil, e.
Single booster (all burners) ^ Touch the s On/Off touch control for the desired burner. ^ Select the " B " touch control for the relevant burner. I appears in the display, the indicator for the booster function and all segments in the lighting circle light.
Turning off a burner ^ Touch the s On/Off touch control for the desired burner. The display will show - for a few seconds. If the burner is still hot the residual heat indicator will show. Turning off the cooktop ^ Touch the s On/Off control for the cooktop.
The cooktop has a timer which can be used to: – time any activity in the kitchen. – automatically switch-off one (any) burner. The functions above can also be used simultaneously.
Automatic switch-off Use this function to turn a burner off automatically. The automatic switch-off can be used for several burners at the same time. ^ Turn the desired burner on and select a power level. ^ Select the m touch control until the indicator light for that burner flashes.
Combi mode The timer and automatic switch-off functions can be used at the same time. If you are using the automatic switch-off function and would like to use the timer as well: ^ Touch the m sensor until the indicator light for the programmed burner(s) lights steadily and 00 appears in the display.
Child Safety Lock Keep children away from the cooktop for their own safety. The cooktop has a Child Safety Lock to prevent children from turning on the burners or changing the settings. The Child Safety Lock can be activated while the cooktop is on or off.
Stop and Go Your appliance has a Stop and Go feature which, when activated, reduces the power of all burners that have been switched on. If you then deactivate the feature, the burners will automatically return to the previous level. If the feature is not de-activated, the cooktop will turn off after 1 hour.
Safety cut-out feature The cooktop is on too long The cooktop has a safety cut-out feature in case it is not turned off after use. If one of the burners is heated for an unusually long period of time (see table), and the power level settings are not adjusted, the cooktop will turn itself off automatically and the residual heat indicator will light.
Overheating protection The induction coils and the cooling element of the electronic are fitted with a overheating protection feature. This prevents the induction coils and cooling element from overheating.
Do not use a steam cleaner to clean this appliance. Steam could penetrate electrical components and cause a short circuit. Pressurized steam could cause permanent damage to the surface and to components. Do not use any sharp pointed objects which could damage the seal between the ceramic surface, the surrounding frame and the countertop.
The cooktop's default settings can be adjusted (see table). ^ While the cooktop is turned off, touch On/Off " s " control and Child Safety Lock " $ " control at the same time until the Child Safety Lock indicator flashes. The burner display shows P (Program) and S (Status) with a number.
Programming Table Program* Status** Setting P0 Demonstration mode and factory default settings S 0 Demonstration mode on S1 Demonstration mode off S 9 Restore Factory default settings P1 Keypad tone w.
Program * Status** Settings P1 2 Auto-heat S 0 off S1 Activate by setting the power level with – . S 2 Activate by setting the power level with + . S 3 Activate with every turn on P1 3 Residual heat.
, Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage. The cooktop or the burners cannot be turned on. Possible fault Solution The cookware is not suitable.
A single burner or the cooktop turns off automatically. Possible fault Solution The overheating protection has been activated. See "Overheating protection". One of the following errors occurs: – The booster function turns off automatically ahead of time.
The cooktop is turned off, the timer display shows numbers and the burner displays show A , F and numbers. Possible fault Solution The touch controls could not be reset automatically. They must be reset manually, see "Resetting the touch controls - Manual reset".
In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department using the information on the back of this manual. When contacting Technical Service quote the serial number and model of the cooktop. This information is visible on the silver data plate.
Installation Instructions To prevent accidents and machine damage read these instructions before installation or use..
Note to the installer: Please leave this instruction book with the consumer for the local electrical inspector’s use. The minimum distances given in these Installation Instructions must be observed in order to ensure safe operation. Failure to do so increases the risk of fire.
~ To eliminate the risk of burns or fire by reaching over heated surfaces cabinet storage space above the cooktop should be avoided. If cabinet storage is necessary, the risk can be reduced by installing a venting hood to project horizontally a minimum of 5" (127 mm) beyond the bottom of the cabinets.
Cooktops flush with the countertop a Wall b Wall covering c Back splash d Countertop e Countertop cut-out f 2" (50 mm) minimum distance Frame/Facet cooktops Installation 44.
Installation dimensions a Front of cooktop b Installation height c Power cord encased by flexible metal conduit Length = 3' 11" (1200 mm) C = 3 / 4 " (19 mm) d Installation height for t.
Ventilation a Front of cooktop b Cut-out at the rear wall of the cabinet for ventilation c Protective base If a protective base is fitted, there must be a distance of at least 4 ½" (110 mm) between the top of the protective base and the top of the countertop, for proper ventilation of the appliance.
Cut out ^ Make the countertop cut-out following the dimensions given in the illustration. Remember to maintain a minimum distance of 2" (50 mm) between the rear wall and the right or left side. See also the "IMPORTANT SAFETY INSTRUCTIONS".
The sealing strip under the edge of the top part of the cooktop provides a sufficient seal for the worktop. Do not let sealant get in between the cooktop frame and the worktop. This could cause difficulties if the cooktop ever needs to be taken out for servicing and possibly result in damage to the cooktop frame or the worktop.
, CAUTION: Before installation or servicing, disconnect the power supply by either removing the fuse, shutting off the main power supply or manually "tripping" the circuit breaker. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards.
Disposal of packing materials The cardboard box and packing materials are biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of an old appliance Old appliances contain materials that can be recycled.
51.
Alterations rights reserved / 4513 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
An important point after buying a device Miele KM 5773 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Miele KM 5773 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Miele KM 5773 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Miele KM 5773 you will learn all the available features of the product, as well as information on its operation. The information that you get Miele KM 5773 will certainly help you make a decision on the purchase.
If you already are a holder of Miele KM 5773, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Miele KM 5773.
However, one of the most important roles played by the user manual is to help in solving problems with Miele KM 5773. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Miele KM 5773 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
