Instruction/ maintenance manual of the product KM 465 Miele
Go to page of 36
Operating instructions Ceramic hobs KM 460 / KM 465 KM 461 / KM 464 / KM 466 KM 463 / KM 468 / KM 469 T o avoid the risk of accidents or damage to the appliance it is essential to read these operating instructions before it is installed or used for the first time.
2.
Guide to the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 KM 460 / KM 465 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 KM 461 / KM 464 / KM 466 .
KM 460 / KM 465 Ceramic hob Control area abcd Single circle zone e Control ar ea f Cooking zone controls and displays g Hob ON / OFF h Safety lock Indicator light for: i Safety lock Guide to the appli.
KM 461 / KM 464 / KM 466 Ceramic hob Control area a Double circle zone bcd Single circle zone e Control ar ea f Cooking zone controls and displays g Hob ON/OFF h Safety lock j Switching on the outer c.
KM 463 / KM 468 / KM 469 Ceramic hob Control area a Double circle zone bd Single circle zone c Extended cooking zone (Multi-zone) e Control ar ea f Cooking zone controls and displays g Hob ON/OFF h Sa.
Cooking zone controls and displa ys l Cooking zone symbol m Displays: 0 = Cooking zone r eady for use 1 to 9 = Power settings H = Residual heat F = Fault message (see on "Safety switch-of f") n Indicator light for Auto heat-up o - and + sensor switches for selecting the power setting Guide to the appliance 7 m o n p 8.
Description of the cooking zones Cooking- zone KM 460 / KM 465 KM 461 / KM 466 ø in cm Rating in watts ø in cm Rating in watts y 21.0 2000 14.5 / 21.
Installation and connection The appliance must be installed and connected by a suitably qualified and competent person in strict accordance with national and local safety regulations. The manufactur er cannot be held liable for damage caused by incorrect installation or connection.
Correct usage T o avoid the risk of accidents and damage to the appliance you should read these operating instructions carefully befor e using it for the first time. They contain important notes on the safety , operation and care of the appliance. For safety reasons this appliance must only be operated after it has been built in.
Safety with children The appliance is only intended for use by adults who have read these operating instructions. This appliance is not a toy! T o avoid the risk of injury keep children well away and do not let them play with it or use the controls. They will not understand the potential dangers posed by it.
Protecting the appliance fr om damage Do not drop anything on the ceramic surface. Even a light object could cause damage in certain circumstances. Do not use pots or pans on the ceramic hob with bases with pronounced edges or ridges. These could scratch or scour the hob surface permanently .
Protection fr om burning and scalding The surface of the appliance is hot when in use, and remains hot for quite a while after being switched off. There is a danger of burning until the residual heat indicators go out. For added protection it is advisable to use heat-resistant pot holders or gloves when using the appliance.
Appliance faults In the event of damage or a defect, switch off the appliance immedi - ately . Disconnect completely from the electricity supply . If the appliance has not yet been fully installed, the electricity cable must be disconnected from the supply point.
Disposal of packing material The transport and protective packing has been selected from materials which are envir onmentally friendly for disposal and can normally be recycled. Packaging (e.g. cling film, polystyrene) and plastic wrappings must be kept out of the reach of babies and young children.
General notes A data plate for your appliance is supplied with this documentation. It should be stuck into the space provided at the end of the instruction book. Keep these instructions in a safe place for refer ence and pass them on to any future user .
Sensor switc hes This hob is equipped with electronic sensor switches which react to finger contact. T o operate a cooking zone touch the relevant sensor switch.
Settings Cooking process Settings Melting butter , chocolate etc. Dissolving gelatine Preparing yoghurt 1 - 2 Thickening sauces containing egg yolk and butter W arming small quantities of food/liquid Keeping warm food which sticks easily Cooking rice 1 - 3 W arming liquid and semi-solid foods Thickening sauces, e.
A uto heat-up When Auto heat up has been activated, the cooking zone switches on automatically at the highest setting and then switches to the continued cooking setting which you have previously selected. The "heat up" time depends on which continued cooking setting has been chosen (see chart).
Switching on an e xtended area Depending on the model of hob, the outer circle of the double cir cle zone or the extended cooking zone can be switched on to provide an extended cooking area when cooking with larger pans. ^ Switch the zone on by pressing the - or + sensor and select a power setting.
Switching off and residual heat indicators T o switc h off a cooking zone: ^ Press the - and + sensors for the zone you want to switch off at the same time . A 0 will light up in the display for that zone for a few seconds. If the cooking zone is still hot, residual heat will then be indicated in the display .
Suitable pans – For optimum energy consumption during cooking, only pans with flat or very slightly concave bases should be used. When the pan is hot, the base should rest evenly on the hob. Uneven bases will lengthen cooking time. Check for suitability when purchasing new pans.
Safety loc k Keep children away fr om the hob for their own safety . In addition, your appliance is equipped with a safety lock to prevent the hob and the cooking zones being switched on or any settings being altered. The safety lock can be activated when the hob is switched off as well as when it is in use.
Safety s witch-off Safety s witch-off with an over -long cooking time Y our hob is fitted with a safety switch-off feature in case you forget to switch it of f yourself.
Safety s witch-off if the sensors are covered Y our hob will switch itself off automatically if one or several of the sensors remain cover ed for more than about 10 seconds, for example by finger contact, food boiling over , or by an object such as an oven glove or a tea towel.
Overheating protection Each cooking zone is equipped with overheating protection. An internal temperature limiter switches of f the heating elements in the cooking zone before the ceramic surface overheats. Once the ceramic has cooled down to a safe level the heating will automatically switch back on again.
Do not use a steam cleaner to clean this appliance. The steam could reach electrical components and cause a short circuit. Pressurised steam could also cause permanent damage to the surface and to components, for which the manufacturer cannot accept liability .
Should any sugar , plastic or aluminium foil spill or fall on to a hot cooking zone while it is in use, first switch off the appliance. Then, immedi - ately , while they are still hot, scrape off all remains of these materials using a shielded scraper blade.
Installation work and repairs to electrical components of this appliance must only be carried out by a suitably qualified and competent person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous.
... the sensors are over sensitive or do not react at all. The sensitivity level of the sensors has changed. It can be corrected as follows: – Make sure that ther e is no direct light (from the sun or fr om an artificial source) falling onto the hob and that the surrounding ar ea is not too dark.
All electrical work should be carried out by a suitably qualified and competent person in strict accordance with national and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous. The manufactur er cannot be held liable for unauthorised work.
W ARNING THIS APPLIANCE MUST BE EARTHED The electrical safety of this appliance can only be guaranteed when continuity is complete between the appliance and an effective earthing system, which complies with local and national regulations.
Electrical connection A US/NZ All electrical work should be carried out by a competent person, in strict accordance with national and local safety regulations. The voltage and rated load are given on the data plate. Please ensure that these match the household mains supply .
Customer contact The address of the near est Service Depar tment is given on the back page. The voltage and rated load are given on the data plate. Please quote these data, together with the model description and serial number when contacting the Ser - vice Department.
35.
Alteration rights reserved / 4004 M.-Nr . 05 397 124 / 01 e n-–.
An important point after buying a device Miele KM 465 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Miele KM 465 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Miele KM 465 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Miele KM 465 you will learn all the available features of the product, as well as information on its operation. The information that you get Miele KM 465 will certainly help you make a decision on the purchase.
If you already are a holder of Miele KM 465, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Miele KM 465.
However, one of the most important roles played by the user manual is to help in solving problems with Miele KM 465. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Miele KM 465 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
