Instruction/ maintenance manual of the product H 5240 BP Miele
Go to page of 72
Operating and installation instructions Oven H 5140 BP, H 5240 BP To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time.
Warning and safety instructions .....................................5 Caring for the environment .........................................1 1 Guide to the appliance ............................................1 2 H 5140 BP, H 5240 BP ................
Temperature indicator ...........................................2 5 Pre-heating ......................................................2 5 Switching on and off automatically ....................................2 6 Entering a cooking duration .........
Defrost .........................................................4 5 Cooking ready meals ..............................................4 6 Cleaning and care ................................................4 7 Appliance front ..........................
This appliance conforms to current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using it for the first time.
Safety with children ~ This appliance is not toy! To prevent the risk of injury do not let children play with the appliance or its controls. ~ Older children may only use the oven when its operation has been clearly explained to them and they are able to use it safely, recognising the dangers of misuse.
~ Before connecting the appliance, make sure that the connection data on the data plate (voltage and connected load) match the mains electricity supply. This data must correspond in order to avoid the risk of damage to the appliance. Consult a competent person if in doubt.
Correct use Caution. Danger of burning. High temperatures are produced by the oven. ~ Use oven gloves when placing food in the oven, turning or removing it and when adjusting oven shelves etc. in a hot oven. Be very careful that you do not burn yourself on the top heating / grill element.
~ Do not line the floor of the oven with aluminium foil when using "Conventional V "/"Bottom heat X "/"Intensive bake O "/"Rapid heat-up S ". This would cause a build-up of heat which could cause damage to the floor of the oven.
Accessories ~ Only use genuine Miele spare parts and accessories with this appliance. If spare parts or accessories from other manufacturers are used, this will invalidate the guarantee, and Miele cannot accept liability.
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children.
H 5140 BP, H 5240 BP a Function selector, retractable when it is at "0" b Display c Sensors V , OK, W , N d Temperature selector, retractable e Door lock for pyrolytic operation f Top heat/g.
Oven controls In addition to operating the various cooking programmes to bake, roast and grill the controls also offer the following: – a time of day display, – a minute minder, – a timer to automatically switch cooking programmes on and off, – settings that can be customised.
Pyrolytic cleaning The oven interior can be kept clean by using the "Pyrolytic ^ " function. During the pyrolytic process the oven is heated to over 400 °C. Any residual soiling is broken down and reduced to ash by the high temperatures. See "Cleaning and care" for more information.
Baking tray, universal tray and rack with non-tip notches The baking tray, universal tray and rack are inserted into the oven between the two rails of a shelf runner. The trays and rack have non-tip safety notches in the middle which prevent them being pulled right out when they only need to be partially pulled out.
Function selector The left-hand control is used to select the function. It can be turned clockwise or anti-clockwise. The function selector can only be retracted when it is at "0".
Temperature selector The right-hand control V 6 W is used to select the temperature. It can be turned clockwise or anti-clockwise. The temperature selector can be retracted in any position. Sensors The sensors underneath the display react to touch. A keypad tone sounds each time a sensor is touched.
Symbols in the display I2:00 h min % N m TS 0 V The following symbols will appear in the display depending on the position of the function selector and/or whether a sensor has been touched: Positi.
Triangle V in the display I60 % m TS V When a sensor is touched, the symbols of functions which can be altered will light up in the display. These will vary depending on programme. Touch the V or W sensor repeatedly until triangle V is underneath the symbol of the required function.
Your oven has a range of appliance functions for preparing a wide variety of recipes. Functions Notes V Conventional – For baking traditional recipes, e.g. fruit cake, casseroles. – Also ideal for soufflés. – If using an older recipe or cookbook, set the oven temperature for Conventional, 10°C lower than that recommended.
Functions Notes S Rapid heat-up – For pre-heating the oven compartment. The oven function required must then be selected. U Fan plus – For baking and roasting.
Before the oven can be used, you will need to – release the controls by pressing them in, if they are pushed in when the oven is delivered. – set the time of day. To set the time of day for the first time The time can only be entered when the function selector is at "0".
Cleaning and heating up for the first time Before use, please remove – any stickers from the oven and from any accessories. – any protective foil from the oven front. See "Cleaning and care" for more information. Before using the oven for the first time – take all accessories out of the oven and wash them.
Using the oven ^ Place the food in the oven. ^ Select the function you want (e.g. Fan plus U ). The following will appear in the display: I60 % V – "160" - the recommended temperature, – the temperature indicator light , – the triangle V under the % symbol.
Changing the temperature If your recipe requires a temperature which is different from the recommended temperature for that function you can use the temperature selector to change it within a given range. The temperature can be changed in increments of 5°C.
Switching on and off automatically You can programme the oven to switch off automatically or on and off automatically. For automatic switching off you need to enter the duration or the duration and a finish time. The maximum duration which can be set is 12 hours.
Entering a cooking duration and delaying the finish time To use the automatic switching on and off function on the oven, both the cooking duration and the finish time must be entered. For example: The time now is 10:45; you want a dish with a cooking duration of 90 minutes to be ready at 13:30.
The end of a cooking programme At the end of the duration – the oven heating switches off automatically. – the cooling fan will continue to run for a while. – the S symbol (Finish) will start flashing. – a buzzer will sound, if the buzzer is switched on (see "Settings % "- P2 ).
The minute minder can be used to time any activity in the kitchen, e.g. boiling eggs. A maximum minute minder time of 59 minutes and 55 seconds can be set. You can set the minute minder at the same time as another timed programme, e.g. as a reminder to stir a dish or add seasoning etc.
Your oven is supplied with standard factory default settings. These settings " P " can be changed by altering their status " s " (see chart).
To change the "status" of a setting ^ Select " % Settings". PI " PI " will appear in the display. ^ Touch the V or W sensor repeatedly until the setting required appears in the display. ^ Touch the OK sensor. S0 The current status " S " of the setting will appear in the display.
Your oven has a system lock 0 which prevents it from being used unintentionally, for example, by children. ^ Turn the function selector to "0". 0 0 V ^ Touch the W sensor repeatedly until triangle V is underneath the 0 symbol. ^ Touch the OK sensor.
Refer to the baking charts for suggestions of temperatures, shelf levels and cooking durations. These take into account a range of different baking tins, quantities and cooking traditions. Handling and preparing food correctly is essential for maintaining good health.
Notes about the charts Temperature, baking duration To achieve even results without over-browning the food, – always select the lowest temperature given in the chart. Do not set a temperature higher than that recommended. Increasing the temperature may reduce the cooking time, but will lead to uneven browning, and unsatisfactory cooking results.
Fan plus Cakes / biscuits Temperature in °C Recommended shelf level Duration 1) in min. Creamed mixture Sponge cake Ring cake Foam cake (tray) Marble, nut cake (tin) Fresh fruit cake with filling (tr.
Conventional heat Cakes / biscuits Temperature in °C Recommended shelf level Duration 1) in min. Creamed mixture Sponge cake Ring cake Foam cake (tray) 1) Marble, nut cake (tin) Fresh fruit cake, wit.
Intensive bake Particularly suitable for – dishes that require a moist topping and crisp base like pizza and quiche lorraine. – cakes with a filling where the base has not been pre-baked, e.g. some cheesecakes. Cakes / biscuits Temperature in °C Recommended shelf level Duration 1) in min.
Recommendations Notes Function Fan plus U You can also use Conventional V . Containers Any heat-resistant containers The Miele Gourmet oven dish, roasting pans with a lid, ovenproof china or glass, roasting bags, the universal tray, the rack on top of the universal tray, the anti-splash insert (if you have one) in the universal tray.
Useful tips Browning Browning only occurs towards the end of the roasting time. Remove the lid about halfway through the roasting time if a more intensive browning result is desired. Standing time At the end of the programme, take the roast out of the oven, wrap in aluminium foil and leave to stand for about 10 minutes.
Food Recom- mended shelf level Fan plus U Conventional V 1) Temperature in °C 2) Time in min. 3) Temperature in °C 2) Time in min. 3) Topside of beef, approx. 1k g 2 170 – 190 100 – 120 190 – 210 100 – 120 Beef fillet or roast beef, approx. 1 kg 4) 2 190 – 210 45 – 55 200 – 220 45 – 55 Venison, approx.
, Grill with the oven door closed. If you grill with the door open, hot air will escape from the oven instead of being cooled by the cooling fan. The controls will get hot. Danger of burning. Function Notes Full grill Y : For grilling thin cuts in large quantities and for browning large baked dishes.
Recommendations Notes Containers Rack on the universal tray Anti-splash insert in the universal tray (if you have one) Do not use the baking tray. Shelf level from the bottom Please refer to the grilling chart. For thin cuts use shelf level 4 or 5 For thicker cuts use shelf level 3 or 4 Pre-heating is necessary Pre-heat the grill for approx.
Preparing food for grilling Rinse briefly under running cold water, pat dry and season with pepper and herbs. Do not season meat with salt before grilling as this draws the juices out. Add a little oil to lean meat if necessary. Do not use other types of fat as they can burn and cause smoke.
Pre-heat the grill for approx. 5 minutes with the door shut. Food to be grilled Recom- mended shelf level Full grill Y / Economy grill Z Fan grill Temperature in °C Total grilling time in min.
The Defrost P function uses the fan to circulate air at room temperature. Please note: – Where possible remove the packaging and put the food to be defrosted on the universal tray or into a suitable dish.
We recommend using Fan plus U . ^ Select the required function and set the temperature. ^ When the temperature indicator light goes out, place the dish in the pre-heated oven. Cook frozen cakes and pizza on baking paper on the rack rather than on the baking tray or the universal tray.
Miele branded cleaning and conditioning products are available from the Miele Spare Parts Department or via the internet on www.miele-shop.com. , Do not use a steam cleaner to clean the appliance. The steam could reach electrical components and cause a short circuit.
Remove all accessories as well as the runners and any extra accessories such as FlexiClip telescopic runners from the oven interior before starting the pyrolytic cleaning process. The high temperatures needed for pyrolysis will damage the accessories.
PerfectClean Before using for the first time remove any stickers from PerfectClean surfaces. The enamelled surfaces of the baking tray, universal tray and anti-splash insert (if applicable) have been treated with a special type of enamelling called "PerfectClean" .
Do not attempt to use on a hot oven or accessories. Allow the PerfectClean surfaces to cool down to room temperature before applying an oven spray. Apply a spray oven cleaner to the soiled areas.
Oven interior The oven interior is coated with dark pyrolytic enamel which facilitates cleaning. This is a particularly hard enamel with an extremely smooth surface and very good anti-stick properties. Manual cleaning of the oven interior Allow the oven to cool down before cleaning by hand.
Pyrolytic cleaning of the oven interior Before starting a pyrolytic cleaning process please note the following: Remove any coarse soiling from the oven before you start. There is a fibre-glass door seal around the oven cavity. This seal is particularly sensitive and should not be cleaned unless absolutely necessary.
Starting a pyrolytic process ^ Take all accessories out of the oven. ^ Select the "Pyrolytic ^ " function. Py I PY I will appear in the display. The number will start flashing. ^ Use the V or W sensor to scoll between PY I , 2 and 3 . ^ Start the pyrolytic process required with the OK sensor.
After the pyrolytic process any debris (e.g, ash), can easily be wiped away. Remember to wait until the oven has cooled down before doing so! Danger of burning. Try not to wipe over the fibre-glass seal when cleaning the oven cavity. It is particularly sensitive and should not be cleaned unless absolutely necessary.
To remove the oven door The oven door is connected to the oven by hinges. Before removing the door, the locking clamps on both hinges have to be released. ^ Open the door fully. ^ To release the locking clamps on the hinges turn them upwards as far as they will go until they are at an angle.
To dismantle the oven door The oven door is made up of four panes of glass and has vents at the top and bottom. When the oven is operating, air is circulated through the door to keep the outer pane cool. If condensate has worked its way in between the glass panes, the door can be dismantled in order to clean in between the panes.
You can now remove the inner and the two middle panes. ^ Gently lift the inner pane up and out of the cover strip. ^ Remove the seal. ^ Now gently lift up the upper of the two middle panes and remove it. ^ Gently lift up the lower of the two middle panes and remove it.
^ To refit the door: The two middle panes are identical. To ensure that they are refitted correctly, one of the corners is more angled than the others. When refitting the lower pane, the more angled corner must be inserted in the left hand retainer at the bottom.
^ Push the inner pane into the plastic strip and insert it in the retainers. ^ Flip the glass pane retainers inwards to close them. To refit the door ^ Hold the door securely at both sides and carefully fit it back onto the hinge guides. Make sure that the door goes back on straight.
^ Open the door fully. ^ Flip both locking clamps back up as far as they will go into a horizontal position. It is essential that the locking clamps are flipped down when the door is refitted after cleaning. Otherwise the hinges could work loose, resulting in damage to the door.
To lower the top heat/grill element Make sure the oven heating elements are switched off and cool. Danger of burning. ^ Remove the runners. ^ Unscrew the wing nut and lower the top heating element. Do not use force to pull it down as this can cause the element to break.
With the aid of the following guide, minor problems can be easily corrected without contacting Miele. , Do not attempt to open the appliance casing yourself! Installation, maintenance and repairs may only be carried out by a suitably qualified and competent person in strict accordance with current national and local safety regulations.
Problem Possible cause and remedy The door cannot be opened at the end of a pyrolytic cleaning programme. ^ Switch the appliance off. If the door lock will still not open please contact the Miele Service Department.
Problem Possible cause and remedy A fault code appears in the displa yF+a number You can rectify the following faults yourself: – Fault 23 : The temperature required for pyrolytic cleaning was not reached. This could have been caused by too much soiling in the oven to start with.
In the event of any faults which you cannot remedy yourself, or if the appliance is under guarantee, please contact – your Miele Dealer or – the Miele Customer Contact Centre (see back cover for address). A call-out charge will be applied for service visits where the problem could have been resolved as described in these instructions.
The following accessories may come as standard with some models. They are also available to order at extra cost via the internet on www.miele-shop.com, your Miele Dealer or the Miele Spare Parts Department. FlexiClip telescopic runners The FlexiClip telescopic runners can be used on any shelf level.
Gourmet oven dish The gourmet oven dish can be placed in the oven directly on the runners. It has non-tip safety notches like the universal tray to prevent it being pulled out too far. It has an anti-stick coating. It is available in two sizes: – HUB 5000-M (internal dimensions approx.
All electrical work should be undertaken by a suitably qualified and competent person in strict accordance with current national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous.
Appliance dimensions and unit cut-out Installation in a base unit Installation in a tall unit * Appliances with glass front ** Appliances with metal front Building-in diagrams 69.
Front dimensions A H 5140: 53.2 H 5240: 47.5 B Appliances with glass front: 2.2 Appliances with metal front: 1.2 Building-in diagrams 70.
, The appliance must not be operated until it has been correctly installed in its housing unit. Otherwise it poses an electric shock hazard. To ensure adequate ventilation to the oven once installed: – do not fit a rear panel into the housing unit. – make sure that the shelf on which the appliance is placed does not touch the wall.
Alteration rights reserved / 22 / 1609 (H 5140 BP; H 5240 BP) M.-Nr. 07 336 120 / 03.
An important point after buying a device Miele H 5240 BP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Miele H 5240 BP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Miele H 5240 BP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Miele H 5240 BP you will learn all the available features of the product, as well as information on its operation. The information that you get Miele H 5240 BP will certainly help you make a decision on the purchase.
If you already are a holder of Miele H 5240 BP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Miele H 5240 BP.
However, one of the most important roles played by the user manual is to help in solving problems with Miele H 5240 BP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Miele H 5240 BP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
