Instruction/ maintenance manual of the product G 663 Miele
Go to page of 40
Installation instructions Integrated dishwasher To prevent accidents and machine damage, read these instructions before installation or use, M-Nr, 05 620 662.
Contents iMPORTANT SAFETY INSTRUCTmONS ................................. 3 mNSTRUCTmONS mMPORTANTES SUR LA SECURmTE ..................... 5 Caring for the environment .......................................... 7 Disposal of the packing material ......
iMPORTANT SAFETY iNSTRUCTiONS mnstallation Insta!lation, maintenance and repair work shou,d be by a M,e,e authorized service technician. Work by unqualified persons could be a hazard and may void the warranty.
iMPORTANT SAFETY iNSTRUCTiONS E_ectrica_ safety Before installation, make sure the voltage and frequency listed on the data plate correspond with the household electrical supply.
iNSTRUCTiONS JMPORTANTES SUR LA SECURJTE Installation Si vous avez des doutes au sujet de I'installation, contactez le D6- L'insta,ation et les travaux de r6pa- ration et d'entretien do.
iNSTRUCTiONS JMPORTANTES SUR LA SECUFHTE S6curite 61ectrique Avant I'installation, s'assurer que la tension et fr6quence 6num6r6es sur la plaque signal6tique correspon- dent b, la source d'61ectricit6 de la resi- dence.
Caring for the environment Disposa_ of the packing materia_ The cardboard box and packaging protect the appliance during shipping. These materials are biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of children.
Opening the door Opening the door without a pane[ in place Without the mounting bracket in place: [] Gently pull on the upper portion of the mounting bracket until the door latch releases (small arrow.
Product and Cut-out Dimensions G 600 Series Dishwashers Full size models G 643 - G 663 Removing the Jeg extensions The black leg extensions can be removed to reduce the machine height to 32 1/4"- 33" (819-838 ram) (see Inset). A = Black leg extension (removable) B = White leg (must be installed on machine).
Product and Cut-out Dimensions G 800 Series Dishwashers Full size models G 843 - G 863 greater than 35" (889 ram), extended ill legs (part# 02 702 601) are necessary.
Installation 1. mnstall the steam deflector A stainless steel steam deflector is supplied to protect the countertop from steam and condesation when the dishwasher is opened, If the countertop is made .
installation [] Center the steam deflector in the opening for the dishwasher and align with the lower front edge of the cou ntertop, [] Press the optic indicator reflector in place, Note: For rounded .
installation Stone or marble countertops: The steam deflector is not required for countertops made of solid, waterproof material. But it is needed for determining the correct position of the optic indicator reflector. [] Remove the black plastic reflector holder and the tape holding it in place from the steam deflector.
installation 2. Install the mounting brackets To ensure stability this dishwasher should be securely attached to the countertop with the two mounting brackets included, [] Insert the tab of each brack.
installation 4, Install the dishwasher under the countertop The dishwasher must be installed so that the water and electricity supplies can be accessed through an adiacent cabinet. The supplies must not be located behind the machine. z_WARNING - Fire hazard Do not cover or crush the plug of an electric appliance.
installation 5. Leve_ the _egs [] The rear leveling legs can be adiusted with a T20 Torx screwdriver by turning the screws at the front of the slide skis, To raise the machine turn clockwise, To lower the machine turn counter clockwise, Several turns may be needed to set the correct heighL Do not use a power screwdriver.
installation 6. mnstaH the custom door pane_ A custom door panel must be installed on the dishwasher before it can be safely operated. A single large panel or a two piece panel separated at the drawer line can be used.
installation The door panel is attached to the dishwasher using the mounting bracket that comes secured to the front of the unit, To remove the bracket: [] Open the door 2- 4" (5 - 10 cm), [] Loo.
Installation Install the bracket on the rea_ of the custom doo_ panel [] Make sure the dishwasher is leve!, [] Measure the distance X between the round hole in the machine outer door panel (shown in inset) and the lower edge of the adioining cabinet door.
Installation [] Place the bracket on the door panel so the notches, _, cross the previously drawn centerline, and the bottom of the bracket lines up with the horizontal X line. [] Mark and drill pilot holes for the 3 Ii screws using a /32 (2,5 ram) drill bit.
installation Attach the front panel to the dishwasher [] Open the door 2- 4" (5 - 10 cm), [] Place the lower mounting clips into the slots of the dishwasher door as shown in the illustration, The.
installation 7. Adjust and secure the front panel Once installed, the panel can be raised or lowered up to 1/lfi" (2 ram) to match the cabinet lines. [] [] [] [] Once this side of the panel lines up with the cabinets, secure it by tightening the _ screw on the edge of the dishwasher door.
installation 8. Secure the dishwasher [] Open the dishwasher door. seal located at the top, outer edge of the dishwasher is tight against the bottom of the countertop. Do not drill any additional holes through the wash cabinet. If in doubt on how to secure the dishwasher, please call Miele's Technical Service Department.
installation s/,, (60 ore) For openings exactly 23 ,s wide: _x_f ''''¸''''''_''¸''_''''''''''''''¸' ...
installation 9. Adjust the door springs [] Open the dishwasher door halfway, If the door remains in this position when released, the springs are adiusted correctly, If the door drops, the tension on t.
installation 10. Make the p_umbing connections An air gap is built into the water inlet system to prevent potable water from mixing with waste water. The dishwasher can heat its own water to the temperatures required by the wash program. This allows the option of connecting the machine to either a hot or cold water source.
installation Existing pJumbing: ' me standard "__ copper p_umo_ng for s dishwasher a_reao', exIsfs wt_r a ,OfT Dresslon fitting aria awe as pictured [] Cut the :_/s" copper tubing after the valve. 3/ II [] Install the _s compression to "_/j4`' MHT (Male Hose Thread) adapter (supplied with the machine), as illustrated.
installation Drainage system specifications: The machine comes equipped with: - A5 fL long (1.5 m) flexible drain hose 7/ . with an internal diameter of ,8 (22 mm). Drain hose extensions can be ordered from Miele's Technical Service Department. - A built-in swivel connector allowing the drain hose to be routed in any direction.
installation Venting the drainage system If the dishwasher drain hose is connected to a floor drain or to a drain pipe that is less than 8" (20 cm) above the floor, the drain must be vented, Othe.
installation 11. Make the e_ectrica_ connection GROUNDmNG mNSTRUCTmONS In the event of a malfunction or break down, grounding will reduce the risk of electric shock by providing a path of least resistance for the electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug.
Installation Power outlet The power outlet for the appliance must be installed within a cabinet, on a wall adjacent to the undercounter space in which the dishwasher is located, An opening through the.
JnstaJJation 12. Test the unit Once the dishwasher is level and secured it should be tested. [] Remove all packing and literature from inside the unit. The yellow Child Safety Lock key hung on the upper basket must be removed before operating the dishwasher.
Installation 13. Install the toekick For installations using a continuous toekick or a cabinet matching toekick Before installing the toekick, measurements must be taken to ensure that the toekick wil.
G 800 Series dishwasher [] Insert the mounting bracket with the flange pointing toward the center of the machine, [] Push the mounting brackets in as far as possible by releasing the tension on the sp.
installation The included toekick will fit without modification if the machine is set to its maximum height and the toekick is recessed as far as possible (4"/10 cm). If the machine height is less than maximum, or if the toekick is not recessed 4" (10 cm), the toekick must be shortened.
installation [] Carefully open the dishwasher door until it hits the toekick. [] Using the front lower edge of the door panel as a guide, draw a line across the toekick.
37.
38.
39.
When contacting the Technical Service, please quote the model and seria| number of your appiianceo MieJe, Jnc, Nationam Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800o843o7231 609=419=9898 Fax: 609=419=4298 www.
An important point after buying a device Miele G 663 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Miele G 663 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Miele G 663 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Miele G 663 you will learn all the available features of the product, as well as information on its operation. The information that you get Miele G 663 will certainly help you make a decision on the purchase.
If you already are a holder of Miele G 663, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Miele G 663.
However, one of the most important roles played by the user manual is to help in solving problems with Miele G 663. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Miele G 663 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
