Instruction/ maintenance manual of the product ESW4802Vi Miele
Go to page of 8
Installation Instructions ESW4802Vi en-CA Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the pr ovided installation instructions.
Miele appliances can be installed flush or proud. Discuss your installation requirements with your architect, designer and installer. Check that the base of the warming drawer is clean and level. Only then will it function properly. When inserting the appliance, wear work gloves to avoid injuries.
Aligning the appliance front After installation it may be necessary to align the appliance front and/or the gap between the appliances/furniture front above. Remove the screws from the left and right sides of the drawer front. Carefully lift the control panel out of the drawer.
^ Loosen the 2 screws b on the inside of the drawer front. ^ Align the front. ^ Tighten the screws on the inside of the drawer front. ^ Replace the control panel, use caution with the power cord. ^ Replace the screws on the left and right sides of the drawer front.
Integrated installations Custom made front panels can be installed with models ESW 4702 FB and ESW 4802 FB. The custom panel must be at least 3 / 8 " (10 mm) thick and made of heat resistant material 140 °F (60 °C). The front panel, including handle, must not exceed 11 lb (5 kg) in weight.
^ Remove the cable tie from the panel. ^ Screw the removed panel to the custom panel (see illustration). ^ Hook the panel into the bottom. Make sure the seal is seated correctly. ^ Replace and slightly tighten the screws on the inside of the drawer front.
, CAUTION: Before servicing, disconnect the power supply by either removing the fuse, shutting off the power main or manually "tripping" the circuit breaker. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards.
Alteration rights reserved / 1009 For the most updated manual see the Miele web site. M.-Nr. 07 342 380 / 04.
An important point after buying a device Miele ESW4802Vi (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Miele ESW4802Vi yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Miele ESW4802Vi - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Miele ESW4802Vi you will learn all the available features of the product, as well as information on its operation. The information that you get Miele ESW4802Vi will certainly help you make a decision on the purchase.
If you already are a holder of Miele ESW4802Vi, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Miele ESW4802Vi.
However, one of the most important roles played by the user manual is to help in solving problems with Miele ESW4802Vi. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Miele ESW4802Vi along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
