Instruction/ maintenance manual of the product ESW 4811 Miele
Go to page of 32
Operating and Installation Instructions Built-in Warming Drawer ESW 4701 / ESW 4711 / ESW 4721 ESW 4801 / ESW 4811 / ESW 4821 To prevent accidents and machine damages, read these instructions before installation or use.
2.
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Guide to the warming drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Guide to the controls . . . . . . . . . . .
WARNING- When using the warming drawer follow basic precautions, including the following: Read all instructions before instal - lation or use of the warming drawer to prevent injury and machine damage. This appliance is only intended for domestic use to hold cooked food at serving temperature.
~ This appliance must only be used after it has been installed in cabinetry to ensure all electrical components are shielded. ~ Never open the outer casing of the appliance. Tampering with electrical connections or components and mechanical parts is dangerous and can cause machine damage.
~ Do not replace the non-slip mat of the warming drawer with any other type of mat. ~ It is possible that some bacterial growth may occur in foods kept for lengthy periods of time at low temperature levels. ~ Before serving, be sure food is at a safe temperature.
General notes ~ Children should not be left alone or unattended in an area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance. Caution : Do not store items of interest to children in cabinets above or in the warming drawer.
a Timer b Temperature selector c Humidity control d Non-slip mat e Rack f Drawer Guide to the warming drawer 8.
The warming drawer is operated by the timer, the temperature selector, and the humidity control. The controls are only visible when the drawer is open.
Temperature selector The temperature is infinitely variable between the basic setting (see illustration) and the "High" setting. The temperature settings: – Basic setting: 97°F (36 °C) .
Humidity control The humidity control adjusts the humidity within the drawer. The humidity control can be set anywhere between "Moist" and "Dry". Use oven mitts when adjusting the humidity control. The control may become hot during use.
Temperature and Humidity Suggestions Food Temperature Humidity control Covered 1 / Uncovered Bacon 2 Medium Dry Uncovered Beef Medium / Well Medium Moist Covered Beef Rare Low Moist Covered Bread hard.
The drawer load will depend on the type and size of your dishes. The maximum load is 33 lbs (15 kg). Do not rest heavy items on the drawer. Use the supplied rack to increase the load space. The rack can be inserted in three positions: middle, left or right.
Tips – To keep different foods hot, set the temperature for the food requiring the highest temperature setting. Place the food needing the highest setting on the rack and the other food on the floor of the drawer. – For large quantities of food, it may be necessary to use a higher temp - erature and humidity level.
Keeping food warm For best results, preheat the warming drawer before warming food. ^ Open the drawer. ^ Turn the timer to the desired time setting. ^ Turn the temperature selector to the desired temperature setting. ^ Slide the humidity control to the desired humidity level.
Warming dishes The warming drawer can also be used to warm dishes. Do not preheat the drawer before warming dishes. Only use heat resistant dishes. ^ Open the drawer. ^ Place the dishes in the drawer. Arrange dishes evenly in the drawer and on the rack.
, CAUTION: Before servicing, disconnect the power supply by either removing the fuse, shutting off the power main or manually "tripping" the circuit breaker.
Drawer ^ Remove the non-slip mat. ^ Clean all surfaces of the drawer with a solution of warm water and liquid dish soap. ^ Wipe dry with a soft cloth. Non-slip mat ^ Clean the non-slip mat by hand with warm water and liquid dish soap. Only put the non-slip mat back in the drawer when it is completely dry.
, Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause an injury or machine damage. Some minor problems can be fixed without a service call. What if the drawer does not heat? Possible fault Fix There is no power to the warming drawer.
In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting Technical Service please quote the serial number and model of the warming drawer.
Installation Instructions.
Disposal of the packing materials The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
, CAUTION: Before servicing, disconnect the power supply by either removing the fuse, shutting off the power main or manually "tripping" the circuit breaker. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards.
Installation tips – The warming drawer should be placed at a convenient height for easy access. – The drawer should be installed clear of drafts caused by open doors and windows. – Proper clearance must be allowed for the warming drawer to open with out interference.
Dimensions for Solo Installation ESW 4711 / ESW 4721 a Material must be moisture resistant Installation 25.
ESW 4811 / ESW 4821 a Material must be moisture resistant Installation 26 (26) (757) (248) (582) (280) (659) (257) 29 10 1/8" 11" 13/16" 15/16" 25 15/16" 22 1" 9 3/4".
Dimensions for a combination installation with an oven ESW 4711 / ESW 4721 a Material must be moisture resistant Installation 27 (25) (596) 23 7/16" (580) (280) 11" (5) 3/8" (10) 1".
ESW 4811 / ESW 4821 a Material must be moisture resistant Installation 28.
Installing the warming drawer ^ Remove the drawer from the casing before installing the appliance into the cabinetry. Removing the drawer ^ Pull the drawer out and loosen the nuts on the left and right a sides. ^ Carefully lift the drawer and pull it slowly out.
Integrated installations Models 4701 FB and 4801 FB Custom made front panels can be installed with models 4701 FB and 4801 FB. Panel dimensions 4701 FB Width 27 3 / 8 " (695 mm) Height 11" (.
f Press the custom panel tightly onto the removed panel. g Screw the removed panel to the custom panel with the eight screws. h Hook the panels into the bottom on and secure at the top with two screws making sure the seal is seated correctly.
Alteration rights reserved / 3907 For the most updated manual see the Miele web site. M.-Nr. 07 179 280 / 00.
An important point after buying a device Miele ESW 4811 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Miele ESW 4811 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Miele ESW 4811 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Miele ESW 4811 you will learn all the available features of the product, as well as information on its operation. The information that you get Miele ESW 4811 will certainly help you make a decision on the purchase.
If you already are a holder of Miele ESW 4811, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Miele ESW 4811.
However, one of the most important roles played by the user manual is to help in solving problems with Miele ESW 4811. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Miele ESW 4811 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
