Instruction/ maintenance manual of the product EGW602-14 Miele
Go to page of 20
Operating and installation instructions Built-in plate w ar mer EGW 602 - 14 T o prevent accidents and machine damage, read UV these instructions before installation or use.
W arning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Caring for our en vironment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Guide to the plate warmer . .
This appliance is intended for resi - dential use only . Only use the appli - ance for its intended purpose. Improper use of the appliance can lead to personal injury and material damage. The manufacturer cannot be held responsible for damages caused by improper use of the plate warmer .
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner . Retur n the ap - pliance to the nearest authorized servi - ce facility for service. Installation, repair and mainte - nance work should be by a Miele authorized service technician.
General notes Children should not be left alone or unattended in an area wher e an appliance is in use. They should never be allowed to sit or stand on any part of the appliance. Caution : Do not store items of inter est to children in cabinets above or in the plate warmer .
Disposal of the packing material The transport and protective packing materials are envir onmentally friendly for disposal and may be recyclable. Ensure that any plastic wrap is dis - posed of safely and kept out of the reach of babies and young childr en.
a On/Off button b T emperature contr ol c W ar ming drawer d Non-slip mat e Rail f On/Off indicator light Guide to the plate warmer 7.
The plate warmer is only intended for warming dishes . Do not use the plate warmer to re-heat, cook or keep food or drinks warm. Condensation from food or drinks could cause moisture dam - age to the appliance. The appliance operates with a hot air system .
W arming dishes Procedur e in brief: ^ Place the dishes in the warming drawer . ^ Select the desired temperatur e set - ting. ^ T ur n on the appliance ( j ). ^ Close the drawer . The indicator on the front of the appli - ance lights up to show that the appli - ance is on.
Selecting a temperature The temperature control is used to ad - just the temperature setting. Only turn the temperature control clockwise and then back again. Stop when you feel a resistance. Forcing the contr ol past this point will damage it. The heat will shut off automatically when the selected temperature is reached.
Never use abrasive cleaners, scour - ing pads, steel wool or caustic (oven) cleaners on the plate warmer . They will damage the surface. Cleaning the exterior The exterior of the plate warmer can be cleaned with warm water and liquid dish soap applied with a soft sponge.
Installation, maintenance and repairs to the electrical components of this appliance should only be by a quali - fied technician in accordance with national and local safety regulations. Repairs and other work by unquali - fied persons could be dangerous and may void the warranty .
In the event of a fault which you cannot correct yourself please contact: – Y our Miele Dealer or – The Miele T echnical Service Department USA 1-800-999-1360 techserv@mieleusa.
The electrical installation instructions for any appliance installed in combi - nation with the plate warmer must be observed. When another appliance is installed in combination with the plate warmer to the same circuit br eaker , operat - ing both appliances at the same time could cause an overload.
The plate warmer may only be installed beneath one of the following Miele ap - pliances: – Steam oven (DG 155) – Coffee machine (CV A 610) Read all the operating and installa - tion instructions for any other appli - ance installed in combination with the plate warmer .
The plate warmer must be installed above a fixed interim shelf within the cabinet to ensure that the cabinetry can support the weight of it and of any other appliance installed in combination with it. When installed in combination with another appliance, the plate warmer must always be installed beneath the other appliance.
Adhering the insulation strips ^ Remove the protective foil fr om the adhesive strips. ^ Align the metal strips flush against the side and rear walls of the cabinet a and stick them on to the plate warmer b (see illustration). The third metal strip is not needed if the cabinetry does not have a rear panel.
18.
19.
Alteration rights reserved / 22 / 001 USA / CDN - 3401 M.-Nr . 05 478 600 (EGW 602 - 14) This paper consists of cellulose which has been bleached without the use of chlorine.
An important point after buying a device Miele EGW602-14 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Miele EGW602-14 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Miele EGW602-14 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Miele EGW602-14 you will learn all the available features of the product, as well as information on its operation. The information that you get Miele EGW602-14 will certainly help you make a decision on the purchase.
If you already are a holder of Miele EGW602-14, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Miele EGW602-14.
However, one of the most important roles played by the user manual is to help in solving problems with Miele EGW602-14. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Miele EGW602-14 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
