Instruction/ maintenance manual of the product EGW 3060-10 Miele
Go to page of 28
Operating and installation instructions Plate warmer EGW 3060-10 To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time.
Guide to the appliance .............................................3 Warning and Safety instructions .....................................4 Caring for the environment ..........................................8 Before using for the first time .......
a On/Off switch (lights up) b Temperature control c Warming drawer d Anti-slip mat e In-operation indicator f Warning sticker (Caution: Danger of burning on the heating element) Guide to the appliance.
This appliance complies with all relevant local and national safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using it for the first time.
Safety with children ~ This appliance is only intended for use by adults who have read these instructions. The appliance is not a toy! To avoid the risk of injury, keep children away from it at all times, and do not let them play with it or use the controls.
~ This appliance may be connected via a fused plug and switched socket. If you wish to connect it to a fused spur connection unit, or if the appliance is supplied without a plug, it must be installed and connected by a suitably qualified and competent person in strict accordance with current local and national safety regulations.
Correct use ~ Depending on the temperature selected and the length of time the appliance is being used, the inside of the drawer can get extremely hot during use, and remain hot for some time after being switched off. ~ For added protection, it is advisable to use heat-resistant pot holders or gloves when using the appliance.
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children.
Please stick the extra data plate for the appliance supplied with this documentation in the space provided in the "After sales service" section of this booklet. Cleaning and heating up for the first time ^ Remove any protective foil and sticky labels.
Do not use the appliance to re-heat, cook or keep food or drinks warm. Condensation from the food or drinks could lead to corrosion in the appliance. Always use oven gloves to remove heated crockery from the drawer. The load bearing capacity of the appliance is 15 kg maximum.
Operation ^ Place the crockery inside the drawer. ^ Select the temperature required. ^ Switch on the appliance ( j ). The switch lights up. ^ Close the drawer. Switch the appliance off ( k ) before removing the heated crockery. Pull the drawer out to its full extent before unloading it.
Heating up times Various factors will affect the heating up times: – The material and thickness of the crockery – Maximum capacity – How the crockery is arranged – The temperature setting. It is therefore not possible to state precise times. However, the following information can be used as a guide: At a temperature setting of approx.
Capacity The quantity that can be loaded will depend to a great extent on the type and size of your own crockery. Example – 25 Cappuccino cups, C 88 mm or – 56 Espresso cups, C 60 mm Place cups and glasses upside down in the drawer so that they warm through thoroughly.
Under no circumstances use a steam cleaning appliance to clean this appliance. The steam could attack the electrical components and cause a short circuit. Only use domestic washing-up liquid to clean this appliance; commercial cleaning products are not suitable, and may damage the appliance.
To avoid damaging the surface of your appliance, do not use: – cleaning agents containing soda, ammonia, acids or chlorides, – cleaning agents containing descaling agents, – abrasive cleaning agents, e.
, Installation work and repairs to electrical appliances must only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). Repairs and other work by unqualified persons could be dangerous.
. . . the crockery does not heat up. Check whether – the mains fuse has tripped. If any of the following problems occur, please contact the Miele Service Department. . . . The crockery is too hot. The temperature control is faulty. . . . the On/Off switch does not light up when the appliance is switched on.
These can be ordered via the internet at www.miele-shop.com, or from the Miele Customer Contact Centre (see back cover for contact details) or from your Miele dealer. Anti-slip mat Anti-slip mat to keep crockery secure E-Cloth (microfibre cloth) Removes finger marks and light soiling.
~ Before connecting the appliance to the mains supply make sure that the connection data on the data plate (voltage and connected load) correspond with the mains electricity supply, This data must correspond in order to avoid the risk of damage to the appliance.
Possible combinations Coffee machine * Appliances with glass front ** Appliances with metal front Steam oven Building-in dimensions 20.
^ Push the appliance into the housing unit as far as the vapour strip and align it. Ensure that the housing unit is aligned at a right angle. ^ Open the drawer, and use the 2 screws supplied to secure the appliance to the side walls of the housing unit.
After building in the combination appliance, it may be necessary under certain circumstances to – align the front of the plate warmer – align the gap between the plate warmer and the combination appliance. To help you do this, there are adjusting points underneath the nuts which secure the drawer to the telescopic runners.
All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK).
Connection should be made via a suitable switched socket or a double pole fused spur connection unit which complies with national and local safety regulations and the on/off switch should be easily accessible after the appliance has been built in.
Important The electrical safety of this appliance can only be guaranteed when continuity is complete between the appliance and an effective earthing system, which complies with local and national regulations.
In the event of any faults which you cannot remedy yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – the Miele Customer Contact Centre (see back cover for address). Please note that telephone calls may be monitored and recorded to improve our service.
27.
Alteration rights reserved/ 0508 M.-Nr. 07 241 630 / 01.
An important point after buying a device Miele EGW 3060-10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Miele EGW 3060-10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Miele EGW 3060-10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Miele EGW 3060-10 you will learn all the available features of the product, as well as information on its operation. The information that you get Miele EGW 3060-10 will certainly help you make a decision on the purchase.
If you already are a holder of Miele EGW 3060-10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Miele EGW 3060-10.
However, one of the most important roles played by the user manual is to help in solving problems with Miele EGW 3060-10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Miele EGW 3060-10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
