Instruction/ maintenance manual of the product 06 707 900 Miele
Go to page of 52
Operating and Installation instructions Ceramic hobs KM 500 KM 503 KM 507 To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time.
Guide to the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 K M5 0 0 ...........................................................4 K M5 0 3 .........................................................
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 After sales service, data plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Installation . . . . . .
KM 500 Hob Control panel Cooking zones: abcd Single circle zones e Control panel f Safety lock indicator lamp Sensor switches for: g Safety lock h Power level i Hob ON/OFF j Cooking zones ON/OFF Guide.
KM 503 Hob Control panel Cooking zones: a Double circle zone bd Single circle zones c Extended cooking zone e Control panel f Indicator lamp for outer circle of the double circle / extended zones Sens.
KM 507 Hob Control panel Cooking zones: a Double circle zone bd Single circle zones c Extended cooking zone e Control panel f Indicator lamp for outer circle of the double circle / extended zones Sens.
Cooking zone display (Example) k Display: 0 = Cooking zone ready for use 1 to 9 = Power settings # = Residual heat l Indicator lamp for auto heat-up Cooking zones Zone KM 500 KM 503 / KM 507 C in cm Rating in watts for 230 V C in cm Rating in watts for 230 V y 18.
To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using it for the first time. They contain important notes on its installation, safety, use and maintenance.
Correct use ~ For safety reasons this appliance must only be operated after it has been built in. This is necessary to ensure that all electrical components are shielded. ~ This appliance is intended for domestic use only and is not to be used for commercial purposes.
Safety with children ~ Use the safety lock to prevent children operating the appliance or altering the settings. ~ The appliance is only intended for use by adults who have read these instructions. ~ This appliance is not a toy! To avoid the risk of injury, keep children well away, and do not allow them to play with it or use the controls.
Protecting the appliance from damage ~ Do not use pots and pans on the ceramic hob with bases with pronounced edges or ridges, e.g. cast iron pans. These could scratch or scour the hob surface permanently. ~ Never heat an empty pan unless the manufacturer of the pan expressly states that you can do so.
Protection from burning and scalding ~ The surface of the appliance is hot when in use, and remains hot for quite a while after being switched off. There is a danger of burning until the residual heat indicators go out. ~ For added protection, it is advisable to use heat-resistant pot holders or gloves when using the appliance.
Appliance faults ~ In the event of damage or a defect, switch off the appliance immediately. Disconnect completely from the electricity supply. Contact the Miele Customer Contact Centre. Do not reconnect the appliance to the mains electricity supply until after it has been repaired.
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children.
Please stick the extra data plate for the appliance supplied with this documentation in the space provided in the "After sales service" section of this booklet. Cleaning for the first time Remove any protective wrapping and stickers. Before using for the first time, clean the appliance with a damp cloth only and then wipe dry.
Single circle cooking zones have one heating element, whilst double circle (vario) cooking zones and extended zones have two. Depending on the model, the heating elements may be separated by an isolating ring.
Sensors This hob is equipped with electronic sensor switches which react to finger contact. To operate a cooking zone, touch the relevant sensor. Each time you touch a sensor switch, an audible tone sounds. Take care to keep the control area clean. Do not place anything on the control area.
Switching on The hob must be switched on before any of the zones can be used. Do not leave the appliance unattended whilst it is being used. To switch the hob on: ^ Touch the ON/OFF sensor s . 0 appears in each of the cooking zone displays. If no further entry is made, the hob will switch itself off after a few seconds for safety reasons.
Settings Cooking process Settings* Melting butter, chocolate etc. Dissolving gelatine Preparing yoghurt 1-2 Thickening sauces containing egg yolk and butter Warming small quantities of food/liquid Keeping warm food which sticks easily Cooking rice 1-3 Warming liquid and semi-solid foods Thickening sauces, e.
Auto heat-up When Auto heat-up has been activated, the cooking zone switches on automatically at the highest setting and then switches to the continued cooking setting selected. The heat-up time depends on which continued cooking setting has been chosen (see chart).
Switching on an extended area (On certain models only) Depending on the model of hob, the outer circle of a double circle zone or the extended cooking zone can be switched on to provide an extended cooking area when cooking with larger pans. Proceed as follows: ^ Switch on the cooking zone required, and select a power setting.
Switching off and residual heat indicators To switch off a cooking zone: ^ Touch the sensor switch for the relevant cooking zone twice. A 0 flashes in the cooking zone display for a few seconds. If the cooking zone is still hot, the residual heat indicator will then appear in the display.
Pans – Pans made from any material can be used on a ceramic hob. – However, the best pans are those with a thick base which is very slightly concave when cold. When heated, the base flattens to rest evenly on the hob, optimising the conduction of the heat.
Tips on saving energy – Use a pan lid whenever possible to minimise heat loss. Uncovered Covered – Select a smaller pan when cooking small quantities. A small pan on a small cooking zone uses less energy than a large, partially filled pan on a large cooking zone.
Safety lock Keep children away from the hob for their own safety. Your appliance is equipped with a safety lock to prevent the hob and the cooking zones being switched on or any settings being altered. The safety lock can be activated when the hob is switched off as well as when it is in use.
Safety switch-off Safety switch-off with an over-long cooking time Your hob is fitted with a safety switch-off feature in case you forget to switch it off yourself.
Overheating protection Each cooking zone is equipped with overheating protection. An internal temperature limiter switches off the heating elements in the cooking zone before the ceramic surface overheats. Once the ceramic has cooled down to a safe level the heating will automatically switch back on again.
For Miele branded cleaning and conditioning products see "Optional accessories". Do not use a steam cleaner to clean this appliance. The steam could reach electrical components and cause a short circuit. Only use proprietary cleaning products which are suitable for cleaning ceramic hobs.
Spots caused by limescale deposits, water and aluminium residues (which have a metalic appearance) can be removed using the ceramic cleaner. Should any sugar, plastic or aluminium foil spill or fall on to a hot cooking zone while it is in use, first switch off the appliance.
You can change the standard settings of your hob. ^ With the hob switched off, touch the hob ON/OFF sensor s and the safety lock sensor $ or the sensor for the outer circle of the double circle/extended zones ? as required, until P (Programme), S (Status) and a number appear in the cooking zone display.
Installation work and repairs to electrical appliances must only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous.
... it is taking too long for the contents of the pan to come to the boil You can test the power level of the cooking zone (see "To test the power level"). ... one or more residual heat indicators are flashing – There was an interruption to the power supply during operation, and the hob has switched itself off.
You can test the power level of a cooking zone by measuring how long it takes to bring a specific amount of water to the boil. The pan (and lid) must be stainless steel or enamel. The diameter of the pan must match the cooking zone, and be flat-bottomed or slightly concave.
C cooking zone in cm Rating in watts for 230 V Quantity of water in litres Max duration in minutes (approx.) 12.0 700 / 750 1.0 13.0 14.5 1000 / 1100 1.0 9.0 14.5 1350 1.0 8.0 17.0 1500 1.5 9.5 18.0 1250 1.5 11.0 18.0 1700 / 1800 1.5 9.0 21.0 2000 2.0 10.
The Miele range has cleaning products especially for your appliance. Ceramic and stainless steel hob cleaner 250 ml Removes heavy soiling, limescale deposits and aluminium residues E-Cloth Removes fin.
In the event of any faults which you cannot remedy yourself, or if the appliance is under guarantee, please contact: – Your Miele dealer, or – the Miele Customer Contact Centre (see back cover for address). When contacting Miele, please quote the model and serial number of your appliance.
Safety instructions for installation Fit the wall units and extractor hood before fitting the hob to avoid damaging the appliance. ~ The veneer or laminate coatings of worktops (or adjacent kitchen units) must be treated with 100 °C heat-resistant adhesive which will not dissolve or distort.
Safety distance above the hob A minimum safety distance must be maintained between the hob and the cooker hood above it. See the cooker hood manufacturer’s operating and installation instructions for details.
Safety distances to the sides of the hob Ideally the hob should be installed with plenty of space on either side. There may be a wall at the rear and a tall unit or wall at one side. On the other side, however, no unit or divider should stan - d higher than the hob (see illustrations).
Safety distance when installing the appliance near a wall with additional niche cladding There must be a minimum distance of 50 mm between the niche cladding and the worktop cut-out. This distance is only necessary for niche cladding made of wood or any other combustible material.
Building-in dimensions KM 500 a Spring clamps b Building-in depth c Front d Mains connection box with mains connection cable, L = 1440 mm e Wiring harness, L = 1550 mm Installation 41.
KM 503 a Spring clamps b Building-in depth c Front d Mains connection box with mains connection cable, L = 1440 mm e Wiring harness, L = 1550 mm Installation 42.
KM 507 a Spring clamps b Building-in depth c Building-in depth for mains connection box d Front Installation 43.
Preparing the worktop ^ Make the worktop cut-out following the dimensions applicable. Remember to maintain a minimum safety distance of 50 mm from the back wall, as well as from any tall unit or side wall to the right or left of the hob (in the case of the KM 503, the minimum distance from a tall unit or side wall to the left should be 70 mm).
Fixing the spring clamps Worktops made of wood ^ Position the spring clamps (supplied) a in the positions shown (see "Appliance dimensions and worktop cut-out") so that they are flush with the top edge of the cut-out, and secure with the 3.5 x 25 mm screws supplied.
Installing the hob ^ Feed the hob connection cable down through the cut-out. ^ Lightly position the hob on the spring clamps a . ^ Using both hands, press down evenly on the sides of the hob until it clicks into position. When doing this make sure that the seal under the hob sits flush with the worktop on all sides.
Mains connection box The connection box can be positioned as follows: – placed in base unit underneath the hob – on the side wall of a base unit underneath the hob – on the wall behind a base unit – in a neighbouring unit.
Protective shelf After installing the hob, you need to make sure that the underside of the appliance cannot be accessed or touched. A fascia panel and a protective shelf must be fitted if: – no oven or cooker is installed underneath the hob. – the appliance is wider than the oven, cooker or control unit.
Electrical connection All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current local and national safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous.
WARNING THIS APPLIANCE MUST BE EARTHED The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system, which complies with current local and national safety regulations.
Wiring diagram N.B. This appliance is supplied single phase only in the U.K. / AUS / NZ Installation 51.
Alteration rights reserved / 3207 M.-Nr. 06 707 900 / 04.
An important point after buying a device Miele 06 707 900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Miele 06 707 900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Miele 06 707 900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Miele 06 707 900 you will learn all the available features of the product, as well as information on its operation. The information that you get Miele 06 707 900 will certainly help you make a decision on the purchase.
If you already are a holder of Miele 06 707 900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Miele 06 707 900.
However, one of the most important roles played by the user manual is to help in solving problems with Miele 06 707 900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Miele 06 707 900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
