Instruction/ maintenance manual of the product 4001 Midland Radio
Go to page of 12
.
2 How to install your Midland mob ile CB .................................. 3 Installation and operating accessories furnished with your Midland CB: ................................................................................................... 3 Where to locate your CB transceiver.
3 Welcome to the world of Midland electronics Congratulations. You have just purchased a state of the art mobile CB radio. In the years ahead, you can expect to realize-time and again the real reasons and meaning of the front running position Midland holds among CB users everywhere.
4 Safety and convenience are the prim ary considerations in deciding exactly where to locate your radio. Caution : Be sure that the unit is located so that it does not interfere with the driver, supplemental restraint system s (air bags), or impair access to any controls.
5 Step 4 Locate and secure the radio into the mounting bracket, allowing working space for later power connections. Power wiring ( negative ground only). Step 1 : If you have not determined whether your vehicle has a negative or positive ground, do so now.
6 Installation of microphone hanger. Mounting holes are provided on the microphone hanger bracket. The bracket can be attached to the vehicl e dash, or other convenient location. Antenna: How to select, position install and tune the right one for you.
7 Antenna installation. Follow the manufacturer’s insta llation instructions carefully. , Warning : Never operate your CB radi o without attaching an ant enna or with a broken antenn a cable.
8 Midland MODEL 4001 CB Operating controls FRONT PANEL CONTROLS ON/OFF VOLUME: In the off position your tr ansceiver power is off. Turn this control clockwise to sw itch on the unit and adjust the volume. SQUELCH CONTROL: Adjust this control until background noise just disappears.
9 MIC GAIN CONTROL: Adjust this control to suit individual voice characteristics and ambient noise conditions to provide maximum intelligibility. S/RF POWER METER: This meter is used in receiveing to indicate the relative signal strength of incoming signals.
10 BACK PANEL ANTENNA CONNECTOR: Connect a standard 50-ohm CB antenna to this connector. EXT SP: When a speaker is connected to th is jack the internal speaker is by-passed. All received signals will be heard through the external speaker. The speaker connected to the “EXT” jack should be rated at 8 ohms and 5 watts.
11 Power Supply ....................................................................13.8 VDC negative ground Size ……………………………………………………4-7/8”(W) x 6-1/2”(D) x 1-1/2”(H) Unit Weight…………………………………………………………………….
12 Midland Radio Corporation Hereby certifies that this unit has been designed, manufactured, FCC type accepted and certified in accordance with part 95 and Part 15, Subpart C of the current FCC rules and regulations as of the date of manufacture. ___________________________________________________________________ LIMITED WARRANTY.
An important point after buying a device Midland Radio 4001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Midland Radio 4001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Midland Radio 4001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Midland Radio 4001 you will learn all the available features of the product, as well as information on its operation. The information that you get Midland Radio 4001 will certainly help you make a decision on the purchase.
If you already are a holder of Midland Radio 4001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Midland Radio 4001.
However, one of the most important roles played by the user manual is to help in solving problems with Midland Radio 4001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Midland Radio 4001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
