Instruction/ maintenance manual of the product G-300 Midland
Go to page of 24
http://www.midlandradio.com - 1 - Owner’s Manual For Model G-300 GMRS/FRS Radio FEATURING • 22 Channels • 38 CTCSS codes • VOX • Monitor function • Call Alert • Back-Lit LCD • Vibrate .
http://www.midlandradio.com - 2 - Use and Care 1. Do not use alcohol or cleaning solutions to clean the radio. 2. Do not immerse the radio in water. 3. Use a soft damp cloth to clean the radio 4. Dry the radio with dry lint-free cl oth should it get wet.
http://www.midlandradio.com - 3 - Index Accessories 4 Accessories order form 5 Introduction 6 FCC Licensing Information 6 Controls and Buttons 7 LCD Display 8 Installing Batte ries 9 Charging the Batt.
http://www.midlandradio.com - 4 - Accessories – Accessories can be purchased at www.midlandradio.com or fill in the form on the following page and mail it to our address. AVP- 1 AVP-2 - 2 Over the ear Mic. - Headsets w/ PTT. - $19.95 - One Dual Desk Charger - 2 Rechargeable battery packs - 1 AC Adapter - $39.
http://www.midlandradio.com - 5 - ACCESSORIES ORDER FORM Please send Money Order or fill in Visa/Master Card information and mail to the address below.
http://www.midlandradio.com - 6 - Introduction Your G-300 represents the state-of-the-art in high-tech engineering. Designed for General Mobile Radio Service operation, this compact package is big in performance. It is a quality piece of electronic equipment, skillfully constructed wi th the finest components.
http://www.midlandradio.com - 7 - Control Buttons & Indicators Speaker Microphone Use to: Monitor Chan nel Activity Use to: - Scan for active channels - Lock the key pad Use t o: - Turn On/Off t he Radio - Enter/Exit the menu Use to: - Increase the v olume - Scroll through t he menu Use to: - Decrease the Volu me - Scroll through the menu Ext.
http://www.midlandradio.com - 8 - LCD Display VOX Icon Low Battery level Indic ator Key Pad Lock Icon Vibrate Mode Icon (G-227 ONLY) Transmit (TX) Icon Channel Indicator CTCSS Channel Indicator Receiv.
http://www.midlandradio.com - 9 - Installing Batteries Your G-300 radio operates with either 4 AAA Alkaline Batteries or optional NiMH battery Pack. The belt clip should be removed (Page 18) to ease i nstallation or removal. To install the batteries: 1.
http://www.midlandradio.com - 10 - Charging the batteries Your G-300 is equipped to allow using a rechargea ble NiMH batter y pack (not included) which can be recharged by an A/C Charger/Adapto r (not included) through the MIC Jack of the radio, or using a Desktop Charger (not included).
http://www.midlandradio.com - 11 - Operation Power On/Off : Press the button for more than 1 second to turn the radio on. Press the button for over 3 seconds to turn the radio off. Volume : Press the button to increase the volume, and press the button to decrease the volume durin g normal operation.
http://www.midlandradio.com - 12 - Call Tone : Your G-300 can transmit a call tone for a fixed length of time. To send a call tone, press the PTT twice rapidly. The T X icon will appear during tra n smitting a call tone and tone can be hear d on the sp eaker for confirmation.
http://www.midlandradio.com - 13 - User Interface To access the advanced features of your G-225/227, your r adi o has the following menu functions: Note : The unit will auto matically go to norm al mode after 5 seconds of no button activity during menu se tting.
http://www.midlandradio.com - 14 - CTCSS Selection : Your G-300 has 38 CTCSS codes avail abl e. The selected CTCSS code may be different for each channel. T o select a CTCSS code for the current channel: • With the desired channel selected, repeat edly press until the current CTCSS Code number or “oF” flashes.
http://www.midlandradio.com - 15 - Power Selection : Your G-300 has two transmit po wer levels. To select the po wer level on channels 1~7 an d 15 ~22: • Press until the “Pr” appears on the display. • Press or to select between high and low power levels.
http://www.midlandradio.com - 16 - Vibrate Alert (G-300 onl y): Y our G-300 is equipped with a Vibrate alert for silent operation of the radio. T he radio will vibrat e when receiving a call tone transmission instead of emitting a call tone sound.
http://www.midlandradio.com - 17 - External Speaker/Microphone Jack : Your G-300 can be used with an optional external speaker/microphone or headset, fr eeing your hands for other tasks.
http://www.midlandradio.com - 18 - Belt Clip : To install the belt clip: • Slide the clip up into the slot on t he back of the radio until the latch in g mechanism clicks. To remove the belt clip: • Pull the latching tab out ward, then gently slide the belt clip do wn toward the bottom of the radio.
http://www.midlandradio.com - 19 - PROBLEM SOLUTION No Power - Check battery installation and/or replace batteries Cannot Receive Messages - Confirm the radios have the same channel settings. - Make sure the you are with in range of the other t ransceivers.
http://www.midlandradio.com - 20 - Technical Specification A. Specification Channels 22 Channels Operating Frequency UHF 462.550 0 ~ 467.7125 MHz Power Source 4 AAA Alkaline or rechargeable Ni-MH Batteries Output Power Typically 2.5 Watts HI, 0.5 Watts LO B.
http://www.midlandradio.com - 21 - Channel Frequency Char t CH. No CH. Freq. CH. No CH. Freq. CH. No CH. Freq. 1 462.5625 9 467. 5875 17 462.6000 2 462.5875 10 467. 6125 18 462.6250 3 462.6125 11 467. 6375 19 462.6500 4 462.6375 12 467. 6625 20 462.6750 5 462.
http://www.midlandradio.com - 22 - Limited Warranty Midland Radio Corporation w ill repair or replace, at its op tion without char ge, any Midland FRS/GMRS transceiver w hich fails due to a defect in material or workmanship within One Year follow ing the initial consumer purchase.
http://www.midlandradio.com - 23 - Come see our COMPLETE PRODUCT line at www .midlandradio. com S.A.M.E. Weather CB Radios w/ESP 2-Way Radios Alert Radios.
http://www.midlandradio.com - 24 - Midland Radio Corporation 1120 Clay St. N. Kansas City MO 64116 Call 816.241.8500 visit us at http://w ww.midlandradio.com Note: Features & Specific ations are subject to Change w ithout notice. MIDLAND is no t responsible for unintentio nal errors or omissions on its packa ging.
An important point after buying a device Midland G-300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Midland G-300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Midland G-300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Midland G-300 you will learn all the available features of the product, as well as information on its operation. The information that you get Midland G-300 will certainly help you make a decision on the purchase.
If you already are a holder of Midland G-300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Midland G-300.
However, one of the most important roles played by the user manual is to help in solving problems with Midland G-300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Midland G-300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center