Instruction/ maintenance manual of the product RE450 Abocom
Go to page of 14
10M Ethernet PC Card Adapter Quick Installation Guide.
FCC REGULATORY S TATEMENTS Part15, Class B This device complies with Part 15 of FCC rules. Operation is subject to the following two conditio ns: 1. This device may not cause harmful interface, and 2. This device must ac cept any int erface received, including interface that may cause undesired operation.
- 1 - INTRODUCTION The PCMCIA Ethernet card is a cr edit-card-size T ype II PCMCIA Ethernet ad apter that comp lies with the PCMCIA 2.1 and IEEE 802.3 standards.
- 2 - • Windows 95 • Windows 98 • Windows ME • Windows 2000 • Windows XP • Lantastic 6.0 • IBM OS/2 Warp Version 3 Physical Speci fication • PCMCIA Type II • 3.
- 3 - INSTALLATION Hardware Connections 1. Insert the PCMCIA Ethernet card into the PCMCIA slot with the 68 pin con nector toward your notebook’s PCMCIA slot and the label facing up. 2. Connect the media coupler to the PC card’s 15-pin connector. 3.
2. Pleas e input the path, A: and insert driver diskette. The driver will be inst alled and you may be asked for the original Windows 95 CD/disks. 3. For the first time instal lation, please click Network icon in Control Panel to add Protocols, Client and Service if you needed 4.
2. Select Search fo r the best… and press Next. 3. Select Floppy disk drives and insert driver diskette. Then press Next , the driver will be installed.
Windows ME Installation 1. Once the PC Card is connected to your computer, Windows will automatically detect the new device. Insert the device Driver Disk into the floppy disk drive of your system. Select Automatic search for a better dr iver (Recommended) and click Nex t .
- 7 - Windows NT 4.0 1. Make sure that the Network Services already installed in the NT 4.0 system. 2. Insert the Ethernet Adapter into one of the system's PCMCIA Slots 3. Power up Windows NT 4.0 4. Open My Computer 5. Open Control Panel 6. Run the Network 7.
2. Select Search for a su itable driver for my device (recommende d) . Click Next. 3. Select Floppy disk drives and insert the disk associated with t he PCMCIA Ethernet card in the disk drive.
4. Click Next to make Windows install the appropriate driver for the new d evice. 5. Click Yes to continue. - 9 -.
6. Click Finish to complete the softwar e installation. Windows XP Installation 1 Once the device is connected, Windows will automatically detect the new device. Insert t he device Driver Disk into the floppy disk drive of your system. Click Install the software automatically (Recommended) and click N ext.
2. Click Continue Anyway to proceed. 3. Wait while Windows c opies the appropriate driver to your system. 4 Click Finish to complete the software installation.
- 12 -.
An important point after buying a device Abocom RE450 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Abocom RE450 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Abocom RE450 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Abocom RE450 you will learn all the available features of the product, as well as information on its operation. The information that you get Abocom RE450 will certainly help you make a decision on the purchase.
If you already are a holder of Abocom RE450, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Abocom RE450.
However, one of the most important roles played by the user manual is to help in solving problems with Abocom RE450. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Abocom RE450 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
