Instruction/ maintenance manual of the product SP616EB MicroNet Technology
Go to page of 7
Quick Installation Guide EtherFast 10/100M S witch Model No.: SP616EB http://www .micronet.info.
Introduction Micronet SP616EB 10/100M Switch provides powerful, high-performance Ethernet switch, with all 16 ports capable of 10M and 100M auto-negotiation operation. With its intelligent addressing engine, it provides users with a wire-speed filtering and forwarding of the traffic.
2 Features y Compliant with IEEE802.3 10Base-T , IEEE802.3u 100Base-TX and IEEE802.3x flow control y Supports speed (10/100Mbps) and duplex mode(Half/Full) and auto-detection y Supports MDI/MDI-X auto crossover y Supports full and half duplex operation on all ports y Supports back-pressure (Half/Full ) and flow control (IEEE 802.
Physical Description SP616EB front view Please refer to the following table for LED definition. LED Status Operation On Power is on. POWER Off Power is off. On/Green Connection established. Blink/Green T ransmitting or receiving data. LNK/ACT Off No link.
4 Inst allation Installation is easy-- simply connect the cables and the power cord. The system is ready, and you can use all the features. Connect each station to the switch by twisted-pair cable. Plug one of the RJ-45 connectors into a RJ-45 port of the s witch, and plug the other RJ-45 connector into the station’s network adapter .
5 Specifica tions Standa rd IEEE802.3, IEEE802.3u, IEEE802.3x, compliant Interface 16 * 10/100M RJ-45 ports Cable Connections 10BASE-T : Cat. 3, 4, 5 UTP/STP 100BASE-TX: Cat.
CE Mark W arning This equipment complies with the requirements relating to electromagnetic compatibility , the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the Member S tates relating to electromagnetic compatibility .
An important point after buying a device MicroNet Technology SP616EB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MicroNet Technology SP616EB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MicroNet Technology SP616EB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MicroNet Technology SP616EB you will learn all the available features of the product, as well as information on its operation. The information that you get MicroNet Technology SP616EB will certainly help you make a decision on the purchase.
If you already are a holder of MicroNet Technology SP616EB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MicroNet Technology SP616EB.
However, one of the most important roles played by the user manual is to help in solving problems with MicroNet Technology SP616EB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MicroNet Technology SP616EB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
