Instruction/ maintenance manual of the product SOLO6C Microlab
Go to page of 4
Prior to first use, please read the manual carefully User Manual SOLO6C Microlab T echnology Co.,Ltd Made in China All symbols and logo belong to the respective brand holder or registered holder . All specifications and information are subject to changes without further notice.
1 Important Safety Instructions Frequently Asked Questions (F AQ) W ARNINGS: 1. Read Instructions - All the safety and operating instructions must be read before the product is operated. 2. Retain Instructions - The safety and operating instructions should be kept product for future reference.
5 Introduction T echnical Information 19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 20. Please remove the power plug form the main power source or wall power source when not in use.
Product connection and operation Illustrations 3 4 Front View 1. Multimedia speaker connections 2. Operation a. Connect the interconnect speaker cable to the Sub speaker and the other end to the Main speaker's audio output jacks (terminals) b. Ensure the terminal polarity connections are matched both ends.
An important point after buying a device Microlab SOLO6C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Microlab SOLO6C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Microlab SOLO6C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Microlab SOLO6C you will learn all the available features of the product, as well as information on its operation. The information that you get Microlab SOLO6C will certainly help you make a decision on the purchase.
If you already are a holder of Microlab SOLO6C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Microlab SOLO6C.
However, one of the most important roles played by the user manual is to help in solving problems with Microlab SOLO6C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Microlab SOLO6C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
