Instruction/ maintenance manual of the product QD-123 MicroBoards Technology
Go to page of 21
QD-MultiDrive Series User’s Manual www.microboards.com Version 1.3.
2.
3 Table of Contents Introduction ................................................................................................................... ............. 5 Unpacking y our sy stem ..............................................................
4.
5 Introduction The QD-MultiDrive Series include s the QD-123, QD-125, and QD-127. Each is a high speed, low cost CD Recordable duplication sy st em from Microboards Technology, LLC. The QD-MultiDrive is perf ect for any user requiring easy copying of audio, video, or Data CDs.
6 Hardware Description The QD-MultiDrive system consists of a CD read er, 3, 5, or 7 CD recorders (based on mode l) and Controller module. The master discs always go into the TO P CD Reader drive. The blank CD media will always go into t he CD Recorder drives below the Reader.
7 Main Menu 1 .0 Copy 2.0 Tes t 3 .0 Te s t & Copy 4 . 0 Verify 5 . 0 Com pare 6 .0 Presc an 7 . 0 Disc Info 8. 0 Edit Track 9. S e t up Source Disc A nalyzing… . Copying – 52 x 17 % 150 .4 MB 01 :15 1. 0 Copy O K : 07 ESC Load Next Blank Disc ENT Source Disc A nalyzing… .
8 1. Copy Copying – 52x 18% 150.4MB 01:15 2. Test 3. Test & Copy Testing – 52x 18% 150.4MB 01:15 1.0 Copy OK: 07 2.0 Test OK: 07 Functions There are 9 different functions for th e QD-Mul tiDrive duplicator: Copy, Test, Test & Co py, Verify, Compare, Prescan, Disc Info, Edit Trac k and Setup.
9 Copying – 52x 18% 150.4MB 01:15 3.0 Copy OK: 07 Compare OK: 7 Fail: 0 Diff: 0 Tgt: 00 CD-RW Identical When this operation completes, the unit will start the Copy proces s: When the job is completed, the reco rded discs will be ejected from the recorder drives.
10 8. Edit Track 8-01. Edit Track CD to CD Edit Select Track: 1/16 04:53 Select Track: + 1/16 04:53 Select Track: End 1Track 04:53 End Edit Disc And burn? YES Copying – 52x Edit 1/16 → 1/1 Burn Complete! OK: 07 Place the master disc int o the TOP reader driv e.
11 Continue Edit Next disc? NO Continue Edit Next disc? NO 8. Edit Track 8. Press the ESC button to take you to this screen: If you wish to continue to add more audio tracks to the di sc in the recorder drive, press t he ▼ button to change the NO to YES.
12 Setup 9 .Setup 9 - 01 . Setup Language Language English Idioma Spanish ENT ESC ENT ▼ ▲ 9-02. Setup CD Burn Speed CD Bur n Speed Maximum CD Burn Speed Available speeds : 48x, 40x, 32x, 24x, 20x, 16x, 10x , 4x ▲ ▼ ENT ▼ ▼ 9-05. Setup Start Up Menu Maximum Start Up Menu 1.
13 Setup Menu The Setup menu include s many setting the user can select to customiz e the use of the QD- MultiDrive duplicator. Here is a descript ion of the options in the setup menu. Language The QD-MultiDrive duplicat or has two language options, Engli sh and Spanish.
14 Display Time The display time function is used to display the total record time, after the recording is completed. The default setting is Off. Button Sound The Button Sound function is used to turn on or off the be ep sound a button makes when pressed.
15 Adv Setup 11 - 01 A dv Setup Under Run Protect 11 . A dvanced Setup Under Run Protect ON 11 - 02 A dv Setup Overburn 11 - 03 A dv Setup Read Error Skip 11 - 04 A dv Setup Burn - In 11 - 05 A dv Set.
16 Advanced Setup Menu To get to the Advanced Setup Menu, press and hold the ESC button for three second s. The Advanced Setup menu includ es options for the more advanced user. Normally these functions are not used in the daily operation of the QD-MultiDr ive duplicator.
17 CD+G The CD+G feature, when set to ON in the Advanced Setup Menu, will allow you to copy a CD+G Karaoke master disc. The default setting is O FF. Important Note : The CD+G value must be set to OFF to use the Track Extraction feature. To enable CD+G duplication, perform the followi ng steps: 1.
18 S pecifications – QD-MultiDrive Series • Product Interface ATAPI/ IDE • Read Speed 52X • Write Speed 52X • System Display LED • Write Method Auto Detect (DAO, TAO ) • Operation Mode C.
19 Appendix 1 List of Functions 1 Copy 2 Test 3 Test & Copy 4 Verify 5 Compare 6 Prescan 7 Disc Info 8 Edit Track 8-1 CD to CD Edit 8-2 Play Audio Track 8-3 Close Session 9 Setup 9-1 Language (Def.
Appendix 2 LCD Messages Normal Conditions: Initialize SDRAM ........................ ........... .................. ............... ..Initialize the memory of the s ystem. Detect Drives ............................... ............... ......Detect what drives are connected with the system.
21.
An important point after buying a device MicroBoards Technology QD-123 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MicroBoards Technology QD-123 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MicroBoards Technology QD-123 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MicroBoards Technology QD-123 you will learn all the available features of the product, as well as information on its operation. The information that you get MicroBoards Technology QD-123 will certainly help you make a decision on the purchase.
If you already are a holder of MicroBoards Technology QD-123, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MicroBoards Technology QD-123.
However, one of the most important roles played by the user manual is to help in solving problems with MicroBoards Technology QD-123. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MicroBoards Technology QD-123 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
