Instruction/ maintenance manual of the product SS-602 Michley Electronics
Go to page of 14
Model SS 602 Instruction Manual For correct usage read these instructions carefully and keep in a safe place for future reference. Please note that this sewing machine is only suitable for domestic use.
Caution: 1 This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety .
When using an electrical appliance, basic safety precautions should always be followed, including the following: Read all instructions before using this appliance. DANGER ---To reduce the risk of electric shock: 1. An appliance should never be left unattached when plugged in.
TROUBLESHOOTING Problem Problem cause Amendment No power or the machine runs slowly Skipping stitches Bobbin t hread c annot be drawn u p Thread keeps breaking Stitches too loose or uneven Needle brea.
TABLE OF CONTENTS Name of Parts....................................................................................................1 Accessories.......................................................................................................2 Connecting Machine to Power Supply .
NAME OF PARTS 23 24 25 26 27 1 Stitch choosing button 2 Power switch & speed adjusting button 3 Reverse stitch control 4 Reset 5 Stitch panel 6 Thread tension lever 7 Thread winding bobbin 8 Threa.
Foot pedal 1 Thread spool 2 Bobbin 2 Needle threader 1 Needle 1 Accessories SECTION . NAME OF PARTS 2 Button Sewing Stitch selector: 2 to 3 1.Draw the accessory table and you will see an adjusting button for button sewing. Push the button to the left, thus, machine is in the state of button sewing.
Connecting Machine to Power Supply Power supply plug Outlet Machine socket Machine plug Power switch 1.Turn off the power switch . 2.Insert the machine plug 3.Insert the power supply plug into the outlet . 4.Turn the power switch to the left or right to turn on the power.
Presser Foot Lifter Presser foot lifter The presser foot lifter raises and lowers the presser foot. Thread Cutter Thread cutter You do not need a pair of scissors to cut the thread after sewing.
Changing Needle Needle clamp screw Needle clamp Turn of f the power switch. Raise the needle to its highest position by turning the handwheel counterclockwise, toward you, and lowering the presser foot. Loosen the needle clamp screw by turning it counterclockwise.
To Remove and Attach the Foot Holder Thumb screw Foot holder Presser foot lifter To remove Remove the thumb screw by turning it counterclockwise with a screwdriver. To attach Match the hole in the foot holder with the threaded hole in the presser foot lifter Fit the thumb screw into the hole.
Bobbin Winding Horizontal spool pin Spool pin Spool holder Lift up the spool pin . Place a spool of thread on the spool pin with the thread coming off the spool as shown. Attach the spool holder , and press it firmly against the spool of thread. • Bobbin winding Draw the thread from the spool Guide the thread around the thread guide.
The position of the bobbin winder stopper is adjustable depending on the required amount of thread on the bobbin. Using a screwdriver , loosen the screw one turn or less ,so that you can adjust the position of the bobbin winder stopper. Do not take the screw all the way out.
• • Removing the hook cover plate Hook cover plate release button Hook cover plate Slide the hook cover plate release button to the right, and remove the cover plate Inserting the bobbin End of thread Notch Notch Place a bobbin in the bobbin holder with the thread running off counterclockwise.
An important point after buying a device Michley Electronics SS-602 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Michley Electronics SS-602 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Michley Electronics SS-602 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Michley Electronics SS-602 you will learn all the available features of the product, as well as information on its operation. The information that you get Michley Electronics SS-602 will certainly help you make a decision on the purchase.
If you already are a holder of Michley Electronics SS-602, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Michley Electronics SS-602.
However, one of the most important roles played by the user manual is to help in solving problems with Michley Electronics SS-602. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Michley Electronics SS-602 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
