Instruction/ maintenance manual of the product SNMP 10BT MGE UPS Systems
Go to page of 14
51029486EN/AA - Page 1 Installation and user manual Nothing will stop you now THE MERLIN GERIN KNOW-HOW SNMP 10BT communication card.
Page 2 - 51029486EN/AA Introduction Thank you for selecting an MGE UPS SYSTEMS product to protect your electrical equipment. The SNMP communication card has been designed with the utmost care. We recommend that you take the time to read this manual to take full advantage of its many features.
51029486EN/AA - Page 3 1. Presentation 1.1 Check on contents ........................................................................................................... .............................. 4 1.2 Storage .....................................
Page 4 - 51029486EN/AA 1. Presentation 1.1 Check on contents The product is made up of the items listed below: ◗ A communication card. ◗ Solution-Pac UPS-management software on a CD-ROM. ◗ A special front panel for Galaxy PW UPSs. ◗ This installation and user manual.
51029486EN/AA - Page 5 1 2 3 1. Presentation 1.3 Functions The SNMP 10BT communication card is an agent for UPS supervision using the SNMP protocol. It provides a number of objects (MIB) on the Ethern.
Page 6 - 51029486EN/AA U-T alk UPS 2. Installation 2.1 Setup The SNMP communication card may be installed in either: ◗ A UPS (see figure 1). ◗ A MultiSlot module (see figure 2). The front of the card must be secured to the device frame using the two screws provided.
51029486EN/AA - Page 7 ◗ Once the card has been inserted in the device, the red LED 1 on the front goes on, indicating that the card is supplied with power.
Page 8 - 51029486EN/AA 2. Installation Crossover 10 Base-T cable: Connection to a computer If the SNMP card is directly connected to a computer, use a crossover cable. 2.3 Ethernet connections To take full advantage of the potential card performance, it is advised to use shielded cables equipped with shielded RJ45 connectors.
51029486EN/AA - Page 9 0080C8ABAA01 3. Operation 3.1 MAC address - Default IP address The label 7 on the SNMP card and the three other labels indicate the MAC address. The MAC address is made up of six bytes expressed in hexadecimal format. The format is 0080C8LLMMNN: ◗ 0080C8 is the manufacturer’s code (always the same).
Page 10 - 51029486EN/AA 3.3 Personalised network parameters Personalisation may be carried out using the HWConf software from MGE UPS SYSTEMS. It is available on the Solution- Pac CD-ROM that is supplied with the SNMP card (in the Emb/Hwconf directory) or on the www.
51029486EN/AA - Page 11 4. T roubleshooting The red LED 1 does not go on when the card is inserted: ◗ Check that the UPS or the MultiSlot module are energised. ◗ Remove and reinsert the SNMP communication card. The green LED 2 does not go on when the cable is connected: ◗ Check that the correct type of cable is connected (see section 2.
Page 12 - 51029486EN/AA IP address When the TCP/IP protocol is installed on a computer system, that system is assigned a unique address. The address is made up of four numbers, each from 0 to 255. For example, 168.8.156.210. MAC address The physical address of the card expressed in hexadecimal format.
51029486EN/AA - Page 13 5. Appendices MultiSlot MGE UPS SYSTEMS module offering a number of functions: - connection of additional cards, - use of other communication protocols, - data concentrator for parallel-connected UPSs. NMS A platform used to manage SNMP devices connected to the TCP/IP network.
Page 14 - 51029486EN/AA 5. Appendices 5.2 Index Address .................................................................... 5, 7, 9 LEDs ...................................................................... 5, 7, 11 MAC .............................
An important point after buying a device MGE UPS Systems SNMP 10BT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MGE UPS Systems SNMP 10BT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MGE UPS Systems SNMP 10BT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MGE UPS Systems SNMP 10BT you will learn all the available features of the product, as well as information on its operation. The information that you get MGE UPS Systems SNMP 10BT will certainly help you make a decision on the purchase.
If you already are a holder of MGE UPS Systems SNMP 10BT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MGE UPS Systems SNMP 10BT.
However, one of the most important roles played by the user manual is to help in solving problems with MGE UPS Systems SNMP 10BT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MGE UPS Systems SNMP 10BT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
