Instruction/ maintenance manual of the product DC-1088 Argus Camera
Go to page of 17
DC-1088 USER MANUAL Package Contents: Argus DC-1088 Digital Camera Use r Guide USB Cable Wrist Strap Installation CD 3 AAA Batteries.
2 T able of Contents Safety And General Information .......................3 Getting T o Know Y our Camera .........................5 Before Using The Camera ................................7 Operating The Camera .....................................7 Installing The Software .
3 Safety and General Information Thank you for purchasing the Argus DC-1088. Please read this manual carefully before using the camera and follow the instructions to avoid any damage that could be caused by improper operation. We built in a 4X16Mb SDRAM memory in this camera.
4 Copyright Information Unless agreed by the rightful owner , pictures taken with this digital camera cannot be used in violation of copyright law . Moreover , when there is a “No Photography” restriction in place, you cannot record any performance, improvisation, or exhibit even for personal use.
5 How to maintain your camera 1. If the lens, LCD display , or viewfinder is dirty , use the accompanying cleaning cloth to wipe the surface clean. Avoid touching these areas with your fingers. 2. When not in use, keep the camera in its carrying case, otherwise you risk scratching the lens, LCD display or viewfinder .
6 Button Shutter Button This button has two functions: Shoot - Press this button for more than 1 second to take pictures. Select - During mode change, press this button to confirm the selected function. ON/OFF button: Press this button to turn the camera on.
7 Operating the Camera Press the mode button to change the settings of the camera. The mode setting cycles by pressing the Up and Down button. SX G A H Q S X G A s ta nd b y s t a te fla s h l ig h t .
8 Note: When flash is charging, “ ” will blink on the LCD display . If the battery is low and the flash is on AUTO or ON mode, the “ “ will blink on the LCD display and the camera will not take picture. Image Quality or Press the UP/Down button and select LO/HI.
Camera Mode or or Press the UP/Down button and select Camera mode. Press Up or Down to make the selec - tion and press the shutter button to confirm. 9 Note: When flash is charging, “ ” will blink on the LCD display .
10 - is the default mode of the camera. - When the icon is displayed, the camera to take 3 continuous pictures. - When the icon mode is displayed, the camera goes into video mode. Press and hold the shutter button to start recording; release to stop. The picture sequence is stored in A VI-format.
11 Deleting Images or Press the UP/Down button until you see mode. Change the mode by pressing Up or Down to make the selection and press the shutter button to confirm.
12 When the camera is disconnected from the computer , it will returns to DSC mode and auto power off. --> USB disconnect --> - T o turn off the camera, press and hold ON/OFF button until the display on the LCD panel disappears.
13 Downloading Photos Connect the camera to the rear USB port of the computer using the supplied cable. Follow the Found New Hardware Wizard installation process. Open PhotoImpression 4 and click on “Camera/Scanner .” Select your camera under select source and click on “ .
14 An interface will appear , click “Get Dsc”. “DSC VIEWER” appears, click “Download Images” The function button: “Download Images”: Download Images from your camera. “Save Images”: Save Images to default folder “Erase DSC Images”: delete the images from camera.
15 Frequently Asked Question My camera does not turn on. The battery is not properly installed. Remove and reinstall the batteries. Insufficient battery voltage. Do not use old batteries or batteries with mixed battery life. Why would I get fuzzy , unclear photos? There might be some movements of your body or hands when taking photos.
16 How do I contact technical support? Argus Technical Support: (888) 552 - 7487 support@arguscamera.com www.arguscamera.com T echnical Specifications Image Resolution : 1.3M 1280x1008 300K 640x480 Built-in memory: 4x16Mb (SDRAM) Photos ： (Memory 4x16Mb SDRAM) Photos to be saved are subject to change from different ambient light 1.
17 PC Compatibility 1. CPU ： 486/66MHz or above 2. memory ： 64MB or above 3. monitor ： 800X600 or above, 24bit or above 4. Windows 98SE / Me / 2000 / XP 5.
An important point after buying a device Argus Camera DC-1088 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Argus Camera DC-1088 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Argus Camera DC-1088 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Argus Camera DC-1088 you will learn all the available features of the product, as well as information on its operation. The information that you get Argus Camera DC-1088 will certainly help you make a decision on the purchase.
If you already are a holder of Argus Camera DC-1088, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Argus Camera DC-1088.
However, one of the most important roles played by the user manual is to help in solving problems with Argus Camera DC-1088. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Argus Camera DC-1088 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
