Instruction/ maintenance manual of the product 66103 MGE UPS Systems
Go to page of 120
www.mgeops.co m Net w ork Management Card (66102 & 66103) User manual ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 1/120.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 2/120 Contents 1 MGE OFFICE PROT ECTION SYS TEMS NET WORK SOLUTION 5 1.1 G ENERAL P RESENTATION 5 1.1.1 Connecting the U PS to the Ethernet network 6 1.1.2 Protection of the co mputers/serve rs 6 1.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 3/120 4.3.1 Email Notification 43 4.3.2 E-mail Message Set tings 45 4.4 C ONFIGURATION 47 4.4.1 Network settings 48 4.4.2 System 50 4.4.3 Notified A pplications 52 4.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 4/120 7.4 JBUS TABLE 91 7.4.1 Data for Pulsar 700 / 1000 / 1500 91 7.4.2 Data for Pulsar M 2200 / 3000 93 7.4.3 Data for Pulsar MX 4000 / 5000 / 10000 95 7.4.4 Data for Pulsar MX frame 15 / 20 97 7.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 5/120 1 MGE Office Prote ction Sy stems Netw o rk Solution 1.1 General Presentation MGE Office Protect ion Syst ems.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 6/120 1.1.1 Connecting the UPS to the Ethernet network This function can be performed either through net work Cards.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 7/120 1.1.3 Supervision of the UPSs over the netw ork Depending on y our needs, y ou can either use: Your Internet .
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 8/120 1.1.4.1 How to connect UPS / agent / network: Insert the optional card in the U PS and connect the UPS to the computer network. Start the MGE Office Protection Systems UPS, then the co mputers.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 9/120 Network Management Ca rds are compatible with the "Enterprise Power Management" su pervision sy stem and with the MGE Office Protect ion Syst ems network protection sy stem.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 10/120 1.3 Technical data 1.3.1 Hardware characteristics Dimensions Dimensions (L x l x H) 132 x 66 x 42 mm Weight .
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 11/120 1.3.4 A dminis tration Up to 50 workstat ions protected by Network Shutdo wn Modules - Central or local configurati on. Up to 5 browsers connected at t he same time (3 in SSL).
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 12/120 ◗ Recording of events and measur ements in the card log ◗ Possibility of shutting down the installation .
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 13/120 1.3.8 Default parameters Function Parameter Default value Possible value Network IP address 172.17.16.16 Network IP address Subnet mask 255.255.0.0 Network IP address Gateway A ddress 0.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 14/120 2 Installation 2.1 Unpacking and check on contents The installation kit contents: ◗ A Network Management Card (6 6102) ◗ A serial communication cable for confi guration (34003 918) ◗ Installation man ual (34003905 ) 2.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 15/120 Ethernet port LED Colour A ctivit y Description ACT Green ◗ Off ◗ Card not connecte d to the net work.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 16/120 2.4 Sensor installation (option) The Environment sens or is available as a n option on the Net work Manage ment Card and is ava ilable from MGE Office Protection Sy stems (reference 66846).
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 17/120 3 Configuration 3.1 Configure IP parameters Once the card has start ed: Connect one end of the cable (340 03918) to the Service po rt.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 18/120 3.1.1 Your network is equipped with a DHCP serv er The card is configure d by default with this service act ivated. The card automat ically collects IP parameters.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 19/120 3.1.2 Your network is not equipped with a DHCP server In the main menu enter 2, then 2 again . The menu is d isplaye d: Follow the instruct ions and ente r the static IP para meters.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 20/120 4 Supervision and a dministration by browser ◗ On a computer equ ipped with a Web browser (Internet Explorer , FireFox or Nets cape recommen ded), enter the address initialised previously in the Installation chapter (e.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 21/120 4.2 UPS 4.2.1 UPS properties page This page is automatica lly refreshed every 10 seconds. From this page, acce ss to the m ain UPS information is available thanks to the comb o box (see s creen copy below).
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 22/120 4.2.1.1 "UPS" zone: general information on the UPS . Indication of the picture and gene ric name of the UPS range Computer room : Customised name of your sy stem.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 23/120 UPS without auto matic by pass Note: In case of loss of commu nication with the UPS, all the ele ments of the sy noptic are grey .
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 24/120 ◗ Battery : Remaining capacity > 50% Remaining capacity < 50% Battery to be checked (battery test re.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 25/120 ◗ A C A utomatic By pass Flow : Energy flow present No energy flow ◗ A C A utomatic By pass Status : Pow.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 26/120 ◗ UPS measurements : ◗ Boxes showing measurements a ppear when sy noptic elements are hovered by the pointer . See example belo w. These measurements are availa ble for AC to DC conver ter, Battery , DC to AC convert er and automatic by pass.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 27/120 4.2.1.2 "UPS status" zone: Essential informat ion ◗ "Active source s": (available on p.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 28/120 4.2.1.3 Viewing the modules ◗ Click on "UPS Modules" scroll li st to view the infor mation about the UP S modules.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 29/120 ◗ The Status can take the next forms: or when the mo dule is working properly with no alarm. when the module has at least one alarm (level Warnin g) active. when the module has at least one alarm (level Critical) act ive.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 30/120 4.2.1.4 Viewing the alarms Click on "A larm Table" scroll list to view the list of current alarms. T he table of managed alarms is included in the appendix .
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 31/120 ◗ A larm table for modular UPS.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 32/120 4.2.1.5 Viewing the “Abou t your UPS” windo w Click on "A bout your UPS" scroll list to view the informati on about the U PS and the card .
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 33/120 4.2.2 On-line help On-line contextual help in Engli sh is available at the top of each page by clicking on the Help link, which is alway s located on the top r ight corner.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 34/120 4.2.3 UPS control Click on the "UPS C ontrol" section in the menu The parameters of t his menu can on ly be modified after entering the "Log in" and "Pass word".
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 35/120 UPS configuration may prevent the shutdown and rest art comm ands from being pro perly run. Re ad the UPS user manual for more information. This page enables tr iggering of startup and shutdo wn sequence s for the UPS main output and c ontrolled outlets.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 36/120 "Immediate On" : A se quence to switch on out put power is launc hed immediate ly. The output is re-powered an d the systems supplied sta rt up correct ly.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 37/120 4.2.4 UPS weekly schedule programmi ng Click on the "Weekly schedule" section of the menu . UPS configuration may prevent the shutdown and rest art comm ands from being pro perly run.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 38/120 4.2.5 Shutdown parameters This page enables v iewing and configurat ion of UPS operating parameters in battery mode and for power restorati on. Click on the "Shutdo wn paramet ers" section in the men u to see the list of parameters.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 39/120 For the main outlet ( "Master" by default) The first shutdow n criteria initiates the re start of the shutdow n sequence .
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 40/120 4.2.6 Measurements Click on " Meas urements " in the menu ◗ The next windo w shows the measurements for a mono phases UPS. The following measurements ar e saved and time-st amped (env.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 41/120 4.2.7 Event log ◗ Click on "Event Log". in the me nu ◗ "Save log" enab les all saved value s to be opened or sav ed in CSV format. (compati ble with Excel ty pe spreadsheets) ◗ "Clear log" enab les deletion of all records.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 42/120 4.2.8 System log ◗ Click on "System log". in the menu ◗ "Save log" enab les all saved value s to be opened or sav ed in CSV format.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 43/120 4.3 Notification 4.3.1 Email Notification The card offers the possibility of redirecting UPS alar ms to an e-mail server. The format of thes e e-mails is compatible with mobile telephone tra nsfer sy stems using text messages (S MS).
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 44/120 ◗ Recipient List : On the left side of t his page, up to four recipients can be configured to receive e-mails from the card. Each addressee has its o wn trigger eve nts, selected from the r ight side of the page, for which an e-mail is sent.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 45/120 4.3.2 E-mail Message Se tti ngs This page enables c ustomisation of the content of the messages received by recipients of e-mails sent by the card. Customisation is c ommon to th e four recipients that can be not ified (see E-mail notificati on ).
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 46/120 The body of the e-mail sent is comp osed of: - Message text, whic h is free tex t. - The date and ti me of the event, as sav ed in the log. - URL of the card, enab ling a direc t link with the card to be established.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 47/120 4.4 Configuration The parameters of t his menu can on ly be modified after entering the "Log in" and "Pass word".
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 48/120 4.4.1 Network settings Click on "Network" in the menu. This menu enables the administ rator to configure the network para meters of the card a nd authorisation of the remote upgrade of the embe dded sy stem.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 49/120 parameters. If no resp onse is rec eived from the server, t he card boots with the last saved para meters from the previous start. The se parameters are those shown on the page.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 50/120 4.4.2 System Click on " System " in the menu. This menu enables the customis ation of the information on the UPS propert ies pages. ◗ UPS Contact: Th is text field is li mited to 49 charact ers.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 51/120 ◗ Factory Reset button: enables r estoration of the defau lt configura tion of all the card’s parameters.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 52/120 4.4.3 Notified Applications Click on " Notified Appl ications " in the menu. Security : The administrator has t o enter his/her login/pass word in order to view this informati on.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 53/120 ◗ Output: number of the UPS outp ut from which t he client is po wered. ◗ Configuration : shows where the parameters of the Net work Shut down Module come from: Local (c oming from the application) or Central (coming f rom the card).
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 54/120 4.4.4 Central shutdown configuration Click on "Notified A pplications" in the menu, then "C onfiguration".
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 55/120 4.4.5 A ccess control Click on " Acces s Control " in th e menu. To access this page , the login a nd password are sy stematically requested if they have not already been entered.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 56/120 ◗ SSL A ccess: When selected, acce ss to the Web interf ace is made in secure mode (https). Connections with Network Shutdo wn Modules stay in standard mode (secure TCP) SSL Security Implementation: SSL version 3.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 57/120 4.4.6 Date and time Click on " Date and Time " in the menu . This menu enables initialisation of the date and time of the card in three diff erent way s.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 58/120 ◗ Sy nchronize with NTP server: E nables connection with a time se rver, either available on the company ’s internal network or on the Web. This ser ver communicates G MT time.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 59/120 4.4.7 Firmware upload Click on " Firmware Upload " in t he menu.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 60/120 4.5 Environment Sensor (option ) The environment sens or (66846) is an o ption that enables te mperature and humidity to be measured, and indication of the position of t wo external cont acts.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 61/120 4.5.2 Environment Status For both measure ments, a graduate d gauge proposes the following functio ns: The cursor indicates the current value.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 62/120 4.5.3 Environment Settings The environment sens or measur es temperature, hum idity and gives the status of the 2 contacts (use d for door, alar ms or generator unit).
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 63/120 Hysteresis must be se t to preve nt multiple notificat ions if humidity fluctuates around a threshold.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 64/120 4.5.4 Log The two environ ment sensor measure ments: Temperature and Humidity are recorded at an int erval defined by the Environment log interv al in the System settings pa ge.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 65/120 5 Server protection 5.1 Set-up of the shutdown pa rameters The Network Shut down Module, on protected server.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 66/120 Start of the shutdo wn sequence Delay before shutdown Utility fa ilure Remaining autono my 100% Shutdown aft.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 67/120 5.1.1.3 Shutdown when backu p time is less than When the Network Management Card detec ts that the percent age of backu p time remaining is less than the value set, the shutdown seq uence is started.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 68/120 5.1.2 Controlled outlets Certain UPS mode ls are equippe d with controlled out lets (generally 2) which are alway s dependant on the U PS's main outlet. Shutdown of the main outlet sys tematically caus es shutdown of the pro grammable outlet s.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 69/120 5.1.3.2 Sequential startup It is possible to de lay outlet po wer-on to reduce inrus h currents on startup or to sequence the sta rtup of several devices. Controlled outlet star tup after a given t ime is based on sta rtup of the ma in outlet.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 70/120 Shutdown duration Start shutdown main output Utility failure Utility Battery c apacity under : NSM 2 on outp.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 71/120 5.3 Shutdown management with 2 NMC bo ards Certain UPS can have 2 NMC bo ards in order to: ◗ Increase the nu mber of protecte d servers, ◗ Protect 2 groups of server conne cted to different net works physically separate d.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 72/120 6 Configuration via R S232 ◗ Use the cord supp lied with the c ard. ◗ Connect the card to a computer equipped with a hypert erminal ty pe emulator. The serial link mu st be set at 9600 baud, 8 bits, no parity, 1 stop bit , and without flo w control.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 73/120 6.1 Choice 1: Restart / Reset Use this function to restart the c ard; two choices are possible 1 : Hardware Reset: Equivalent to a rest art of the elect rical power supp ly.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 74/120 6.2.2 Choice 2: Modif y Network settings Enables the modificat ion of network parameters For each of the fol lowing questions, y ou can press <Return> to se lect the value shown in braces, or you can ent er a new value.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 75/120 6.3 Choice 3: Lost password / Set Login Pa ssw ord to Default In the even the login or password is lost, cho.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 76/120 6.4 Choice 4: Return to Default Configuration Enables restoratio n of the default confi guration of all the .
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 77/120 7 Industrial Net w o rk Management Car d (INMC option) 7.1 Presentation 7.1.1 Overview 7.1.2 Functions The Industrial Net work Manage ment Card (INMC) provides the same functions tha n the NMC card desc ribed in the previous section of this docume nt.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 78/120 7.1.3 Technical characteristics Functions Parameters Default values Possible values JBUS/MODBUS communicatio.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 79/120 7.2 Installation 7.2.1 RS232 link configuration and c onnection Set the SA2 switches like below: The next fi.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 80/120 7.2.2 RS485 link configuration and c onnection 7.2.2.1 RS485 connection La liaison EIA RS485, en 2 fils o u .
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 81/120 The settings of the RS485 link ar e made through the SA 1 switches: SA1 description: 1: reserved 2: reserved.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 82/120 7.2.2.2 RS485 link configura tion for 2 wires connexion Set the SA2 switches like below to set the RS485 mod.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 83/120 Set the SA1 switches to select t he two wires config uration with t ermination: The next figure gives a ty p.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 84/120 7.2.2.3 RS485 link configura tion for 4 wires connexion Set the SA2 switches like below: Set the SA1 switche.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 85/120 Set the SA1 switches to select t he four wires confi guration with termination: The next figure gives a ty p.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 86/120 7.2.3 Configuration of the JBUS/MODBUS communication parame ters ◗ Use the cord supp lied with the c ard. ◗ Connect the card to a computer equipped with a Hy per terminal type emulator.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 87/120 ◗ The next menu appears : ----------- ------------------------- --------------------- --------------------.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 88/120 Setting Jbus config uration : Set Slave number : 0x7 Set the Baud Rate [1 : 38400, 2: 19200, 3: 9600, 4: 480.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 89/120 7.2.3.6 Choice 6: Display Jbus frames Enables the disp lay of the Jbus frames: Recv : 01 01 00 00 00 64 3d e1 Send : 01 81 02 c1 91 Recv : 01 03 00 62 00 64 e5 ff Send : 01 03 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 .
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 90/120 7.3 Additional Web pages The INMC card Jbus parameters coul d be set through the next pa ge:.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 91/120 7.4 JBUS table 7.4.1 Data for Pulsar 700 / 1000 / 1500 7.4.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 92/120 7.4.1.2 Measurements tab le Description of the physical qua ntity Word (hex) Unit I output 109 A U output 12.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 93/120 7.4.2 Data for Pulsar M 2200 / 3000 7.4.2.1 Status table Status description Status to 0 Status to 1 Word (he.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 94/120 7.4.2.2 Measurements tab le Description of the physical qua ntity Word (hex) Unit I mains 2 106 A I output 1.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 95/120 7.4.3 Data for Pulsar MX 4000 / 5000 / 10000 7.4.3.1 Status table Status description Status to 0 Status to 1.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 96/120 7.4.3.2 Measurements tab le Description of the physical qua ntity Word (hex) Unit I mains 1 10 0 A I mains 2.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 97/120 7.4.4 Data for Pulsar MX frame 15 / 20 7.4.4.1 Status table Status description Status to 0 Status to 1 Word .
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 98/120 7.4.4.2 Modular fault table Description du Status Status to 0 Status to 1 Word (hex) Bit General alarm A bse.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 99/120 Description du Status Status to 0 Status to 1 Word (hex) Bit General alarm A bsent Present 65 0 Fan failure .
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 100/120 7.4.4.3 Measurements tab le Description of the physical qua ntity Word (hex) Unit I1 (I phase 1) mains 1 10.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 101/120 Description of the physical qua ntity Word (hex) Unit U mains 1 (phase 1) 150 V U mains 1 (phase 2) 151 V U.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 102/120 7.4.5 Sensor data 7.4.5.1 Status table Status description Status to 0 Status to 1 Word (hex ) Bit Input 1 a.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 103/120 7.4.5.2 Measurements tab le Description of the physical qua ntity Word (hex) Unit Temperature measure 180 .
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 104/120 7.4.5.3 Read of the personal ization table Description Wor d (hex) Unit High threshold te mperature (° C) .
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 105/120 7.4.6 Other data Information descri ption Word (hex) Example Manufacturer name 1A0 « MGE Office Protecti o.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 106/120 8 Append ices 8.1 Tables of alarms and events 8.1.1 Table of alarms List of time dated alarms Alarm on A la.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 107/120 Inverter overload Inverte r load OK Inverter over temperature Inverter tem perature OK Inverter short circu.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 108/120 If the UPS is modular UPS, for eac h module: Battery fuse blow n Battery fuse OK No Battery B attery presen.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 109/120 Positive DC bus too low Positive DC bus OK Output switch (Q5N) open Output switch (Q5N) closed Normal AC NO.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 110/120 Inverter fault Inverter OK Inverter overload Inverter load OK Inverter overtempera ture Inverter temperat u.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 111/120 8.1.3 Table of system alarms Network Management Ca rd startup Send test mail SUCC ESS Send test mail ERROR .
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 112/120 8.2 SNMP objects 8.2.1 MGE MIB The NMC card imple ment reduc e MGE Office Protecti on Sy stems MIB, with the objects bellow ma naged. The entire MIB descr iption is ava ilable on www.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 113/120 mgoutputFrequency _1 deciHz {7,2,1,3,1,0} mgoutputFrequency _2 deciHz {7,2,1,3,2,0} mgoutputFrequency _3 de.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 114/120 If the Environment Sensor is det ected , the follo wing informatio n are managed. upsmgEnvironA mbientTemp 0.1 degré {8, 1,0} upsmgEnvironA mbientHumidity 0.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 115/120 8.2.2 Table des TRAPS : (1.3.6 .1.4.1.705.1.11) SNMP traps are sent when alar ms appears and desappea rs.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 116/120 - upsEnvironment Input1Open Trap 62 Level 2 - upsEnvironment Input2Open Trap 64 Level 2 - upsEnvironment Input2Closed Trap 63 Level 2 The level is used to se lect traps t o be sent to the supervis or.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 117/120 9 Glossary Bootp: Protocol based on UDP used to allocate an IP address correspondin g to an Ethernet card during the startup phase.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 118/120.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 119/120 NMS NET WORK MANA GEMENT STATION (SNMP) The dedicated PC or workstation is used on the company ’s networks to a dministrate all device s connected t o the network.
ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 120/120 programmed to perform specific tasks upon recepti on of the traps.
An important point after buying a device MGE UPS Systems 66103 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MGE UPS Systems 66103 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MGE UPS Systems 66103 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MGE UPS Systems 66103 you will learn all the available features of the product, as well as information on its operation. The information that you get MGE UPS Systems 66103 will certainly help you make a decision on the purchase.
If you already are a holder of MGE UPS Systems 66103, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MGE UPS Systems 66103.
However, one of the most important roles played by the user manual is to help in solving problems with MGE UPS Systems 66103. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MGE UPS Systems 66103 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
