Instruction/ maintenance manual of the product 63 TD 61, 70 TD 64, 72 TD 66, 72 TD 67, 82 TE 93, 70 TE 65 Metz
Go to page of 56
TV . VIDEO. AUDIO. MEC ABLITZ Elba 63 TD 61 – 1 00 MT Hawaii 70 TD 64 – 1 00 MT Linea – SF 72 TD 66 – 1 00 MT Linea de luxe – SF 72 TD 67 – 1 00 MT Gemini– SF 82 T E 93 – 1 00 MT Morea.
2 Contents Hints for use of the Operating Instructions Remote control handset RB 11 . . . . . . . . . . . . . . . . . 3 1. Setting up and connecting . . . . . . . . . . . . . . . . . . . . 4 1.1 Turning the TV on and off . . . . . . . . . . . . . . . .
3 Remote control handset RB 11 RB 1 1 123 456 789 0 OK P + P - Ȅ AV TV ? MENU INFO ķ PRG. ɮ + - VTR ɚ ıı ľľ REC TIMER B A ı ı ľľ ıı 10 0 H z IJ -/-- • ON - Set switches to last viewed .
4 Connecting the aerial Standard SAT and terrestrial station aerial sockets are fitted at the rear of the TV. Thunderstorms represent a danger for all electrical appliances! If lightning strikes the power line or the aerial, the TV may be damaged even if it is switched off.
5 1.1 T urning the TV on and off Press this key on the remote control.... The screen displays Explanation 1. Call the Equipm. Configuration menu OK P + + - AV --/- - P 123 456 789 0 A B TV ? MENU Equipm.
2.1 TV menu and operator help Menu control of the TV, and the versatility of the system, ensure that supposed complicated settings and entries are made easily and clearly comprehensible for everyone. Operator Help can be called with the key when in TV mode.
7 Press this key on the remote control.... The screen displays Explanation 2.2 Programme selection 1. Select the programme position (e.g. Prog number 10) 2. Next programme With this key, you can switch back and forth between the last two programme positions you selected.
Press this key on the remote control.... The screen displays Explanation 4. Store the setting and return to TV picture TV picture Prog Logo Channel Signal ▲▼ >> weitere Einstellungen Std., Pict., Sound 698-03A-GB VTR1 ARD ZDF SA T 1 00 06 34 40 Video Rec.
3. Presetting TV stations Autostore function, sorted to countries The autostore function automatically scans through the entire reception range to locate stations. The located stations are presented in the station table and can then be stored by way of the key.
10 3.1 Sorting stations IIn the „Sort“ submenu you can move, exchange, copy, or delete the stationss stored in the programme positions. The „Sort“ submenu is displayed automatically after the autostore function has found all available stations.
Press this key on the remote control.... The screen displays Explanation 11 3.2 Fine tuning The individual channels are automatically tuned to channel centre for station tuning. As a rule, this automatic tuning will be sufficient. Apply manual fine tuning if automatic tuning does not produce satisfactory results.
Press this key on the remote control.... The screen displays Explanation TV picture 12 3.3 Allocating a station logo A logical logo consisting of up to 5 characters can be allocated to each station. The station RTL 2, for example, can be allocated the logo RTL 2.
4. Changing individual picture settings Press this key on the remote control.... The screen displays Explanation 13 1. Adjusting the luminance 2. Adjusting the contrast 40 change: + - OK Luminance 40 .
Press this key on the remote control.... The screen displays Explanation 14 4.2 Adjusting the video and audio standard v alues 1. Call the TV menu 2. Example 1: Call the „Video standard values“ sub- menu. Adjust and store the luminance. 3. Example 2: Call the „Audio standard values“ sub- menu.
Press this key on the remote control.... The screen displays Explanation 15 5. Equipment configuration Assigning the function keys The remote control handset has two factory programmed function keys A and B. Press the key in normal television mode to reveal the factory programming.
Press this key on the remote control.... The screen displays Explanation 16 5. Equipment configuration Assigning the function keys 4. Select the function for TV mode (in this example „Subtitles“) 5. Switch to Megatext mode and program the function keys 6.
17 Press this key on the remote control.... The screen displays Explanation 5. Equipment configuration Settings for programme change 1. Call the settings for programme change 2. Set spatial sound when changing programmes 3. Select stereo wide when changing program 4.
Press this key on the remote control.... The screen displays Explanation 18 5. Equipment configuration RGB priority V olume adaptation 2. Set the RGB priority 3. Activate and deactivate the volume adaptation 4. Store the settings and return to TV picture OK P + + - AV --/- - P 123 456 789 0 A B TV ? MENU Equipm.
Press this key on the remote control.... The screen displays Explanation 19 Programme Std Pict. ▲▼ << weitere Einstellungen Logo, Channel, Signal VTR1 ARD ZDF SA T 1 Auto.
20 Press this key on the remote control.... The screen displays Explanation Programme Std Pict. ▲▼ << weitere Einstellungen Logo, Channel, Signal 698-06C-GB VTR1 ARD ZDF SA T 1 Auto.
Press this key on the remote control.... The screen displays Explanation 21 The picture format of each TV programme position must be set to 4:3. If a video recorder with 16:9 format detection is connected, the picture format of the related programme position must be set to 16:9.
Press this key on the remote control.... The screen displays Explanation 22 Output Video Rec.2 Video Rec.1 Camcorder 698-07A-GB A V -recording no recording A Device connection Input Video Rec.2 Video Rec.1 Camcorder Pr . 1: ARD ? MENU return Help TV picture red white yellow blue 698-07B-GB A V -recording Camcorder ➜ Video Rec.
Press this key on the remote control.... The screen displays Explanation 23 7. AV recording Video recorder ➜ video recorder Example: You wish to copy a film from video recorder 1 to video recorder 2. 1. Call the AV menu 2. Select the desired AV device (in this example: video rec.
Press this key on the remote control.... The screen displays Explanation 24 Switch-on time: Switch-off time: Reminder time Time of day: OK P + + - AV --/- - P 123 456 789 0 A B TV ? MENU Time settings.
25 TV picture Press this key on the remote control.... The screen displays Explanation 4. Enter the reminder time (Example: 21.45 hr) 5. Enter the time manually (Example: 14.
Press this key on the remote control.... The screen displays Explanation 26 Time settings Childlock Timer recording Basic setting of MVS OK P + + - AV --/- - P 123 456 789 0 A B TV ? MENU Timer/childlock 698-08F-GB ? MENU return Help TV picture white yellow blue REC Ȅ 8.
27 Press this key on the remote control.... The screen displays Explanation 4. Enter your personal code 5. Enter the beginning and end of the viewing period Call the TV menu and enter your personal code OK P + + - AV --/- - P 123 456 789 0 A B TV ? MENU Childlock 698-08I-GB 01 02 05 -- -- ---- -- : -- -- : -- C hi ld lo ck .
Press this key on the remote control.... The screen displays Explanation 28 Prog. Date VPS enter date 19.03. 14:20 698-08K-GB — — — — — — — — — — : : : : : : : : : : : : : : : : : : : : - - Timer recording .
29 9. Connecting headphones Headphones can be connected to the TV by way of the connecting socket underneath the fascia cover at the front. The socket will only accept headphones with a 3,5 mm jack plug ( Elba 6,35 mm ). We recommend the use of headphones with an impedance of at least 32 Ohms.
30 The Megatext file displays all the subjects available on a specific programme position and the chapters belonging to the currently selected subject. The range of subjects and chapters depend on the transmitting station and can therefore be completely different in each programme position.
31 This function enables you to run through the individual pages. Just as in a book, you can leaf forwards or backwards from the displayed page. Press the right side of the key to step backwards, and the left side of the key to step forwards. This function enables you to run through the individual chapters.
32 10. Megatext Press this key on the remote control.... The screen displays Explanation 1. Recognizing multiple pages 2. Selecting subpages 422 ARD/ZDF Di. 12.10.93 13:08:00 AEG AMB A GIV Allianz Altana Asko BSAF Bayer Bay . Hypo BHF-Bank BMW Bay . V erbank ohne Gewähr Kurse Ffm.
33 Select a file card for any desired subject. Continue pressing the blue key to run through the file- card box. The displayed choice of chapters is adapted to the selected subject. Select a file card for any desired chapter. Continue pressing the yellow key to run through the file-card box.
34 Press the 0 key to return to the previous numerically called page or, if not numerically called, to the index page of the displayed choice. The adjoining picture shows the index page of the ARD channel as an example. 10. Megatext Press this key on the remote control.
35 * When the B* key is pressed for the first time, the upper part of the selected page is displayed with the font size doubled. You can scroll slowly through the page by holding down the key.
36 There will be certain Megatext pages, e.g. stock market, news, weather forecast, etc., that you will want to read repeatedly. We have pro- grammed a way of making it easier to read such pages. 10 marks per position can be set on each of the first ten programme positions.
37 When the required page is displayed (in our example subpage 422/2), press the red key again. „MARK 2“ is now displayed in green lettering in the top left-hand corner of the screen. 10 marks can be set as described in steps 1 - 4 in each of the first 10 programme positions.
38 10. Megatext Press this key on the remote control.... The screen displays Explanation 1. From TV picture to the first mark 2. Step forward to the next mark 3. Return to TV picture MARKE 1 400 ARD/ZDF Di. 12.10.93 10:52:00 Deutschland Wetterv orhersage Früh- bzw.
39 Erasure of the mark on the current text page changes the sequence of the remaining marks. Example: 3 marks have been set in the current programme position: - Mark 1 on text page 400 - Mark 2 on text page 422/2 - Mark 3 on text page 503 You now erase the mark 2 on text page 422/2.
40 * The teletext transmitted by the station is superimpo- sed on the picture at the bottom of the screen. The subtitle function can be activated or deactivated with the A or B function key. This TV enables you to display programme subtitles automatically.
41 11. Special picture effects (not for Gemini) 1. Switch on the zoom function and enlarge the picture 2. Call the zoom function for the current programme position Variable Zoom All programmes that ar.
42 When you press this key, the current frame is „frozen“ on the screen. The TV programme (or the video film) continues to run in the backgro- und. Pressing the key again switches back to the cur- rent programme (or video film). 11. Special picture effects 1.
43 11. Special picture effects (only Gemini) Zoom Press this key on the remote control.... The screen displays Explanation 11. Special picture effects (only Gemini) 1.
44 12. Operation without remote control Programme selection: Press the - P + keys. Volume: Hold down the preselect key until the bar display for the volume appears on the screen. Now press the - P + keys to adjust the volume. Contrast: Hold down the preselect key until the bar display for contrast appears on the screen.
45 13. Connecting peripheral equipment Video recorders can be connected to the TV set via the antenna socket or a EURO socket. We recommend connection via a EURO (Scart) socket, since only such sockets have separate inputs and outputs for the picture and sound signals.
46 13. Equipment configuration Connecting external devices In the menu „Device connection“, you can define which AV devices are connected to the various sockets on the TV set. The box „Devices“ contains a list of common AV devices. Only certain devices can be connected to the FRONT sockets.
47 13. Connecting peripheral equipment V ideo recorder AV Fully assigned SCART or EURO cable, for S-VHS/Hi8 playback only Euro 1/2/3 S-VHS/i8 Video recorder VHS Video recorder Connections on the rear of the TV set Metz cable 087928010 only for copying S-VHS/Hi-8 films from EURO 2 to AV 3 In (phono input) V ideo Rec.
48 13. Connecting peripheral equipment V ideo recorders V ideo signal In the following example, video recorder 2 is to be connected to the EURO 1 socket.
49 The picture quality of a video film can be impro- ved in a terrestrial programme position with a standard channel. The video signal for this programme position must be set to „Aerial“. To ensure optimum picture quality the „VCR“ function must be switched on.
50 EURO EURO 13. Connecting peripheral equipment P ay-TV decoder This Pay-TV decoder decodes the scrambled signals of a Pay-TV station (e.g. Premiere) so that they can be displayed on the screen of the TV set. For connection of a Pay-TV decoder, you need a EURO (=Scart) cable in which all 21 pins are assigned.
51 13. Connecting peripheral equipment P ay-TV decoder Press this key on the remote control.... The screen displays Explanation 1. Select the Pay-TV program- me position and call the station table 2. Call the submenu „Signal“ 3. Select video signal „via decoder“ 4.
52 Mains voltage: 230 V ac, 50/60 Hz Power consumption: 14. T echnical data 14.2 Maintenance and care 14.1 Upgrade kits • Multi-standard upgrade kit 031 NB 1038 For reception of „Standard M“ and „Standard L“ stations. • NICAM upgrade kit 041 NB 1048 • SAT upgrade kit 081 NB 1010 For satellite reception without an additional receiver.
53 2-channel sound transmission: Separate reproduction of 2 sound channels, e.g. 2 different lan- guages. Audio Latin for „I hear“ - The sound frequency range audible to the human ear is between 60 to 20,000 Hz approx. Camcorder A video camera with integrated video recorder.
54 16. Remote control handset for video recorders RB 1 1 123 456 789 0 OK P + P - Ȅ AV TV ? MENU INFO ķ PRG. ɮ + - VTR ɚ ıı ľľ REC TIMER B A ı ı ľľ ıı 10 0 H z IJ -/-- • Video recorder.
55 17. Index A ccess to riddle solution . . . . . . . . . . . . . . . . . . .40 Aerial connection . . . . . . . . . . . . . . . . . . . . . . . . . .4 Allocating a station logo . . . . . . . . . . . . . . . . . . . .12 Audio . . . . . . . . . . . . . .
T elevisions sets Video recorders DVD players Quality – A matter of principle. With the trend-setting Metz technology you will allways make the correct choice.
An important point after buying a device Metz 63 TD 61, 70 TD 64, 72 TD 66, 72 TD 67, 82 TE 93, 70 TE 65 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metz 63 TD 61, 70 TD 64, 72 TD 66, 72 TD 67, 82 TE 93, 70 TE 65 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metz 63 TD 61, 70 TD 64, 72 TD 66, 72 TD 67, 82 TE 93, 70 TE 65 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metz 63 TD 61, 70 TD 64, 72 TD 66, 72 TD 67, 82 TE 93, 70 TE 65 you will learn all the available features of the product, as well as information on its operation. The information that you get Metz 63 TD 61, 70 TD 64, 72 TD 66, 72 TD 67, 82 TE 93, 70 TE 65 will certainly help you make a decision on the purchase.
If you already are a holder of Metz 63 TD 61, 70 TD 64, 72 TD 66, 72 TD 67, 82 TE 93, 70 TE 65, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metz 63 TD 61, 70 TD 64, 72 TD 66, 72 TD 67, 82 TE 93, 70 TE 65.
However, one of the most important roles played by the user manual is to help in solving problems with Metz 63 TD 61, 70 TD 64, 72 TD 66, 72 TD 67, 82 TE 93, 70 TE 65. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metz 63 TD 61, 70 TD 64, 72 TD 66, 72 TD 67, 82 TE 93, 70 TE 65 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
