Instruction/ maintenance manual of the product METRA 99-7603 Metra Electronics
Go to page of 12
INST ALLA TION INSTRUCTIONS FOR PART 99-7603 99-7603 APPLICA TIONS Nissan V ersa 2007-201 1 KIT FEA TURES • DIN Mount Radio Provision with Pocket • ISO Mount Radio Provision with Pocket • Double.
Dash Disassembly - Nissan V ersa 2007-201 1 ... .................. . . . . . . 1, 2 Kit Assembly - DIN Mount Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . . 3 - ISO Mount Radio Provision with Pocket. . . . . . . . . . . . .
99-7603 DASH DISASSEMBL Y NISSAN VERSA 2007-201 1 A B C 1 D isconnect the negative battery ter- minal to prevent an accidental short circuit. 1 Unclip and remove the panel above the radio . ( Figure A,B) 2 Remove (2) Phillips screws securing the radio trim panel then unclip and remove the entire panel surrounding the radio and a/c controls.
99-7603 DASH DISASSEMBL Y NISSAN VERSA 2007-201 1 D E V OL CD L OAD S CRL AUDIO S CAN C AT CH AUX 6 CD CHANGER RPT RDM DISP CLOCK RADIO P RESET A-B-C SE EK T RACK F ILE T UNE FF-REW F OLDER P WR P USH 1 2 3 4 5 6 2 Remove (4) Phillips screws securing radio , unplug and r emove radio.
99-7603 KIT ASSEMBL Y 3 A B DIN MOUNT RADIO PROVISION Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs outwar d. (Figure A) Note: Y ou will need to remove the aftermarket radio’ s trim ring if equipped. 1 Slide the aftermarket radio into the cage until it snaps into place .
99-7603 KIT ASSEMBL Y 4 FRONT F ACE- RIGHT SIDE BRACKET A B C ISO MOUNT RADIO PROVISION Mount the ISO Brackets to the after- mark et radio using the screws sup- plied with the r adio . (Figure B) 1 Note: The f ollo wing modification will need to be made to both ISO brackets when using the ISO mount radio pr o vision.
99-7603 KIT ASSEMBL Y 5 A B DOUBLE DIN MOUNT RADIO PROVISION Mount the factory brackets (removed from factory radio during disassembly) to the sides of the double DIN radio using screws supplied with the double DIN radio . (Figure A) 1 Place the double DIN trim plate on the front of the double DIN radio .
99-7603 KIT ASSEMBL Y 6 A B ST ACKED ISO UNITS PROVISION Mount the factory brackets (removed from factory radio during disassembly) to the sides of the stacked ISO units using screws supplied with the ISO units. (Figure A) 1 Place the double DIN trim plate on the front of the stacked ISO units.
99-7603 FINAL ASSEMBL Y FINAL ASSEMBL Y (A) Strip wire ends back 1/2" B) T wist ends together C) Solder D) T ape A B C D Locate the factory wiring har ness in the dash. Metra recommends using the proper mating adapter and making connections as shown.
NOTES 8 99-7603 I.
NOTES 9 99-7603.
99-7603 INSTRUCTIONS 1-800-221-0932 REV . 10 / 06 /10 © COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORA TION INST99-7603 www .metr aonline.com ...... ------------------ .
An important point after buying a device Metra Electronics METRA 99-7603 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metra Electronics METRA 99-7603 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metra Electronics METRA 99-7603 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metra Electronics METRA 99-7603 you will learn all the available features of the product, as well as information on its operation. The information that you get Metra Electronics METRA 99-7603 will certainly help you make a decision on the purchase.
If you already are a holder of Metra Electronics METRA 99-7603, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metra Electronics METRA 99-7603.
However, one of the most important roles played by the user manual is to help in solving problems with Metra Electronics METRA 99-7603. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metra Electronics METRA 99-7603 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
