Instruction/ maintenance manual of the product 99-7606 Metra Electronics
Go to page of 12
INST ALLA TION INSTRUCTIONS FOR P ART 99-7606 T orx T -10 Driver • Small Flat Blade Scr ewdriver • Phillips Scr ewdriver 1-800-221-0932 www .metr aonline.
T ABLE OF CONTENTS 99-7606 • Dash Disassembly - Nissan Titan 2006 -07 ................................................................1, 2 - Nissan Pathfinder Armada 2006-07...........................................1, 2 • Kit Assembly: - Pre-Kit Assembly .
1 99-7606 D ASH DISA SSEMBL Y OFF A B C Disconnect the negative batter y terminal to prevent an accidental short circuit. 1 Unclip and remove entire panel including radio and climate controls. (Figure A) 2 Remo ve (4) Phillips screws to remove radio from sub-dash.
2 99-7606 D ASH DISA SSEMBL Y Unclip and remove the Hazard Light switch assembly . (Figure D) 6 Remove (2) T10 T orx screws from the passenger air bag off light assembly and remove . (Figure D) Note: The small round stick er also needs to be remo ved from the factory panel and placed onto the 99-7606 radio housing.
3 99-7606 PRE-KIT ASSEMBL Y Attach the passenger air bag off light assembly to the 99-7606 Radio Housing using the factor y hardware remo ved in the dash disassembly . Also , apply to air bag button the small round airbag sticker pr eviously remo ved in Step 4 dash disassembly .
4 99-7606 KIT ASSEMBL Y Snap the pocket into the radio housing . (Figure C) 3 Slide the DIN cage into the Radio Housing and secure b y bending the metal locking tabs down. (Figure A) 1 Slide the aftermarket radio unit into the cage and secure . (Figure B) 2 DIN R ADIO PRO VISION WITH POCKET Continue to final assembly .
5 99-7606 KIT ASSEMBL Y Snap the pocket into the radio hous- ing . (Figure D) 4 Slide the radio into the radio opening until the side clips engage . (Figure B) 2 Snap the T rim plate into the Radio Housing . (Figur e C) 3 ISO R ADIO PRO VISION WITH POCKET A Mount the ISO Brackets to the radio with the screws supplied with the radio .
6 99-7606 KIT ASSEMBL Y Slide the Double DIN radio into the Double DIN bracket/r adio housing assembly and secure the radio to the kit using the screws supplied with the head unit. (Figure C) 3 Cut and remove center divider from radio housing . (Figure A) 1 Snap the Double DIN trim plate onto the housing/radio assembly .
7 99-7606 KIT ASSEMBL Y Snap the Double DIN trim-plate onto the housing/radio assembly . (Figure C) 4 Snap the Double DIN brackets to the inside edge of the radio hous- ing . (Figure B) 2 Slide the stacked ISO units into the Double DIN bracket/r adio housing assembly and secure the units to the kit using the screws supplied with the head units.
8 FINAL A SSEMBL Y Make wiring connections using the EIA color code chart shown belo w and the instructions included with the head unit. Metra recommends making connections as shown below; Strip, Splice, Solder , T a pe. Isolate and individually tape off ends of an y unused wires to prevent electrical short circuit.
9 NOTES 99-7606.
99-7606 INSTRUCTIONS 1-800-221-0932 www .metr aonline.com REV . 02/22/08 © COPYRIGHT 2004-2008 METRA ELECTRONICS CORPORA TION INST99-7606.
An important point after buying a device Metra Electronics 99-7606 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metra Electronics 99-7606 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metra Electronics 99-7606 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metra Electronics 99-7606 you will learn all the available features of the product, as well as information on its operation. The information that you get Metra Electronics 99-7606 will certainly help you make a decision on the purchase.
If you already are a holder of Metra Electronics 99-7606, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metra Electronics 99-7606.
However, one of the most important roles played by the user manual is to help in solving problems with Metra Electronics 99-7606. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metra Electronics 99-7606 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
