Instruction/ maintenance manual of the product 99-7509 Metra Electronics
Go to page of 12
METRA. THE WORLD’S BEST KITS.™ © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORA TION APPLICA TIONS 1-800-221-0932 metraonline.com INST ALLA TION INSTRUCTIONS FOR PART 99-7509 Small Flat Blade Scre.
T able of Contents Dash Disassembly – 2006-up Mazda 5 3-5 Kit Assembly – DIN radio provision with pocket 6 – ISO mount radio provision with pocket 7-8 – Double DIN/stacked ISO DIN head unit pr.
1. Remove the shifter . (Figure A) 2. Remove (2) Phillips screws exposed below shift lever trim panel. (Figure B) Continued on next page 3 Dash Disassembly 99-7509 P R N M-D A/C A/C (Figure A) (Figure.
4 99-7509 Dash Disassembly 3. Unclip and remove the center console side trim panels then remove (1) Phillips screw per side behind panels. (Figure C,D).
5 99-7509 Dash Disassembly 4. Unclip and pull the center console towards the rear of the vehicle. Note: Y ou do not have to remove the center console completely . (Figure E ) 5. Remove (2) Phillips screws at the bottom of the radio trim panel then unclip the panel inc luding the factor y radio.
Kit Assembly 99-7509 6 DIN radio provision with pocket (Figure A) (Figure B) (Figure C) 1. Locate the factor y wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the nega tive batter y terminal and test the unit for proper operation.
Kit Assembly 99-7509 7 ISO mount radio provision with pocket (Figure A) (Figure B) (Figure C) 1. Locate the factor y wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the nega tive batter y terminal and test the unit for proper operation.
Kit Assembly 99-7509 8 ISO mount radio provision with pocket (Figure D) 6. Snap the pocket into the radio housing. (Figure D) 7. Reassemble dash in reverse order of disassembly .
Kit Assembly 99-7509 9 Double DIN/Stacked ISO units provision (Figure A) (Figure B) (Figure C) 1. Locate the factor y wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the nega tive batter y terminal and test the unit for proper operation.
Notes.
Notes.
METRA. THE WORLD’S BEST KITS.™ © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORA TION 1-800-221-0932 metraonline.com INST ALLA TION INSTRUCTIONS FOR PART 99-7509 REV .
An important point after buying a device Metra Electronics 99-7509 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metra Electronics 99-7509 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metra Electronics 99-7509 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metra Electronics 99-7509 you will learn all the available features of the product, as well as information on its operation. The information that you get Metra Electronics 99-7509 will certainly help you make a decision on the purchase.
If you already are a holder of Metra Electronics 99-7509, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metra Electronics 99-7509.
However, one of the most important roles played by the user manual is to help in solving problems with Metra Electronics 99-7509. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metra Electronics 99-7509 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
