Instruction/ maintenance manual of the product 99-7501 Metra Electronics
Go to page of 6
rev. 300801 99-7501 INSTALLA TION INSTRUCTIONS TOOLS REQUIRED Cutting tool Phillips screwdriver KIT COMPONENTS Radio Housing (4) #8 Phillip Screws Pocket ISO-DIN Trimring ISO-DIN Spacers Equalizer Fac.
2 1. Disconnect the negative battery terminal to prevent an accidental short circuit. Gently pry the radio trim panel away from the dash. Remove (4) screws securing the dummy plate to the back of the bezel. (see Fig. A) 2. Convert the Radio Housing to SINGLE DIN by cutting along the lower scored lines and removing the bottom portion of the Housing.
4 1. Disconnect the negative battery terminal to prevent an accidental short circuit. Remove the ashtray and (2) Phillips screws exposed in the ashtray cavity. Remove the pocket from the trim panel and (2) Phillips screws exposed. Unclip the panel and remove (4) screws securing the factory dummy plate.
6 1. Disconnect the negative battery terminal to prevent an accidental short circuit. Remove (2) screws from each side of the console trim panel. Remove the ashtray and (1) screw from the rear support tab.
8 1. Disconnect the negative battery terminal to prevent an accidental short circuit. Remove the ashtray and (2) screws within the ashtray cavity. Carefully pull the trim panel away from the dash and disconnect any wiring. Remove (4) screws securing the factory radio to the sub-dash and disconnect the wiring.
1. Disconnect the negative battery terminal to prevent an accidental short circuit. Remove the ashtray and (2) screws within the ashtray cavity. Unsnap the shifter boot molding and remove the (2) screws exposed. Unsnap the a/c control bezel and remove the (2) screws exposed.
An important point after buying a device Metra Electronics 99-7501 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metra Electronics 99-7501 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metra Electronics 99-7501 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metra Electronics 99-7501 you will learn all the available features of the product, as well as information on its operation. The information that you get Metra Electronics 99-7501 will certainly help you make a decision on the purchase.
If you already are a holder of Metra Electronics 99-7501, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metra Electronics 99-7501.
However, one of the most important roles played by the user manual is to help in solving problems with Metra Electronics 99-7501. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metra Electronics 99-7501 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
