Instruction/ maintenance manual of the product 99-7426 Metra Electronics
Go to page of 8
INST ALLA TION INSTRUCTIONS FOR PART 99-7426 1-800-221-0932 © COPYRIGHT 2010 METRA ELECTRONICS CORPORA TION www .metraonline.com Small Flat Blade Screwdriver or Panel Removal T ool • Phillips Scr e.
T ABLE OF CONTENTS 99-7426 • Dash Disassembly - Nissan Murano 2009-10 ............................................1, 2 • Kit Assembly: - DIN Mount Radio Provision with Pocket ........................3 - ISO Mount Radio Provision with Pocket ......
99-7426 DASH DISASSEMBL Y 1 1 Disconnect the negative battery ter mi- nal to prevent an accidental short cir- cuit. A B C Unclip trim panel at bottom center of dash. (Figure A) 2 Remove (1) Phillips screw from bot- tom of each side trim panel. Unclip and remove the side trim panels.
99-7426 DASH DISASSEMBL Y NISSAN MURANO 2009-10 D E 6 Remo ve (2) Phillips screws from the panel below the radio (containing the passenger air bag light) then unclip, unplug and remove the panel. ( Figure D) Remove (6) Phillips screws securing the radio to the sub dash.
99-7426 KIT ASSEMBL Y 3 A B C DIN MOUNT RADIO PROVISION WITH POCKET Slide the DIN cage into the radio hous- ing and secure by bending the metal locking tabs down. (Figure A) 1 Slide the aftermarket radio into the cage until it snaps into place . (Figure B) 2 Snap the pocket into the radio housing .
99-7426 KIT ASSEMBL Y 4 A B C ISO MOUNT RADIO PROVISION WITH POCKET Mount the ISO Brackets to the radio using the screws supplied with the r adio. (Figure A) 1 Slide the radio into the radio housing until it snaps into place . (Figure B) 2 Snap the T rim plate onto the front of the Radio Housing.
99-7426 KIT ASSEMBL Y 5 DOUBLE DIN RADIO PROVISION Cut and remove the center bar from the radio housing. (Figure A) 1 Snap the Double DIN brackets to the inside edge of the radio housing.
99-7426 FINAL ASSEMBL Y FINAL ASSEMBL Y (A) Strip wire ends back 1/2" B) T wist ends together C) Solder D) T ape A B C D Locate the factory wiring har ness in the dash. Metra recommends using the proper mating adapter and making connections as shown.
An important point after buying a device Metra Electronics 99-7426 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metra Electronics 99-7426 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metra Electronics 99-7426 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metra Electronics 99-7426 you will learn all the available features of the product, as well as information on its operation. The information that you get Metra Electronics 99-7426 will certainly help you make a decision on the purchase.
If you already are a holder of Metra Electronics 99-7426, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metra Electronics 99-7426.
However, one of the most important roles played by the user manual is to help in solving problems with Metra Electronics 99-7426. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metra Electronics 99-7426 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
