Instruction/ maintenance manual of the product 99-7402 Metra Electronics
Go to page of 12
INST ALLA TION INSTRUCTIONS FOR P ART 99-7402 1-800-221-0932 www .metr aonline.com KIT FEA TURES © COPYRIGHT 2004 METRA ELECTRONICS CORPORA TION • DIN Radio Provision with pocket • ISO Radio Prov.
Dash Disassembly Nissan 350Z 2003-2005....................................1, 2 Kit Assembly Din Mount Radio Provision with pocket.......................................................... 3 ISO Mount Radio Provision with pocket........................
99-7402 D ASH DIS ASSEMBL Y Disconnect the negative battery terminal to prevent an accidental short circuit. 1 For vehicles with automatic trans- mission, Unsnap and remove smaller trim-ring from around shifter . (Figure A) For vehicles with manual transmis- sion, Unscrew and remove shifter knob .
99-7402 D ASH DIS ASSEMBL Y 6 Remove (2) screws above the r adio and (2) screws below the radio . Also remove (2) screws securing the radio/trim panel assembly . (Figure E) 7 NISS AN 350Z 2003-2005 Remove (4) screws securing the radio to the trim panel and remove the radio .
Attach the radio / housing assembly to the radio trim panel using the factory screws removed during disassembly . (Figure C) 1 Slide the radio into the DIN cage until it snaps into place . (Figure B) 4 99-7402 KIT ASSEMBL Y Secure DIN cage to radio housing b y bending the locking tabs outwar d.
Snap the ISO trim-plate onto the front of the assembled radio and housing . (Figure B) 3 4 NOTE: T o remove the radio unsnap and remov e the ISO trim-plate. Using a flat blade screwdriver disengage ISO brack ets from the radio housing and slide radio out of r adio housing.
Place one of the ISO spacer brackets and the left factory mounting bracket (removed from radio during disas- sembly) on the left side of the radio . The spacer bracket should be between the radio and the factory bracket.
Place one of the ISO spacer brack- ets and the left factory mounting bracket (Remo ved from radio during disassembly) on the left side of the ISO units.
FINAL ASSEMBL Y 1 Locate the factory wiring har ness in the dash and make the connection as shown. Metra recomends using the proper mating adapter and making the connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.
99-7402 NOTES 8.
99-7402 NOTES 9.
99-7402 INSTRUCTIONS 1-800-221-0932 www .metr aonline.com © COPYRIGHT 2004 METRA ELECTRONICS CORPORA TION INST99-7402 REV . 05/05/06.
An important point after buying a device Metra Electronics 99-7402 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metra Electronics 99-7402 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metra Electronics 99-7402 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metra Electronics 99-7402 you will learn all the available features of the product, as well as information on its operation. The information that you get Metra Electronics 99-7402 will certainly help you make a decision on the purchase.
If you already are a holder of Metra Electronics 99-7402, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metra Electronics 99-7402.
However, one of the most important roles played by the user manual is to help in solving problems with Metra Electronics 99-7402. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metra Electronics 99-7402 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
