Instruction/ maintenance manual of the product 95-7321 Metra Electronics
Go to page of 8
INST ALLA TION INSTRUCTIONS FOR P ART 95-7321 1-800-221-0932 www .metr aonline.com KIT FEA TURES © COPYRIGHT 2010 METRA ELECTRONICS CORPORA TION • DDIN Head Unit Provision • ISO Stacked Head Unit.
Dash Disassembly ........................................................................ 1-2 Kit Preparation ................................................................................. 3 Kit Assembly ............................................
95-7321 DASH DISASSEMBL Y Disconnect the negative batter y terminal to prevent an accidental short circuit. 1 Unclip and remove the trim panel surrounding the radio and including the a/c vents. (Figure A) 2 HYUNDAI ACCENT 2006-2010 KIA RIO / RIO 5 2006-2010 Remove (4) Phillips screws securing the radio .
95-7321 DASH DISASSEMBL Y Disconnect the negative batter y terminal to prevent an accidental short circuit. 1 Unclip and remove the entire panel surrounding the radio and including the A/C controls. Note: Start at bottom of panel. (Figure A) 2 KIA SPORT AGE 2005-2010 Remove (4) Phillips screws to extr act radio from dash.
3 HYUNDAI ACCENT : Cut and remove shaded areas. (Figure A) 1 A KIA RIO: Cut and remove shaded areas. (Figure B) 2 KIA SPORT AGE: Cut and remove shaded areas.
4 Locate the factor y wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative batter y terminal and test the unit for proper operation. 1 A Attach the Double DIN brack ets to the inside edge of the Double DIN trim plate .
95-7321 NOTES.
95-7321 INSTRUCTIONS 1-800-221-0932 www .metr aonline.com © COPYRIGHT 2010 METRA ELECTRONICS CORPORA TION INST95-7321 REV . 04/26/10 METRA. THE W ORLD’S BEST KITS.
An important point after buying a device Metra Electronics 95-7321 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metra Electronics 95-7321 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metra Electronics 95-7321 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metra Electronics 95-7321 you will learn all the available features of the product, as well as information on its operation. The information that you get Metra Electronics 95-7321 will certainly help you make a decision on the purchase.
If you already are a holder of Metra Electronics 95-7321, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metra Electronics 95-7321.
However, one of the most important roles played by the user manual is to help in solving problems with Metra Electronics 95-7321. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metra Electronics 95-7321 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center