Instruction/ maintenance manual of the product 99-7612B Metra
Go to page of 16
METRA. THE WORLD’S BEST KITS.™ © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORA TION APPLICA TIONS 1-800-221-0932 metraonline.com INST ALLA TION INSTRUCTIONS FOR PART 99-7612 REV .
T able of Contents Dash Disassembly – Nissan Murano 2003-2007 3-5 Kit Assembly – ISO DIN head unit provision with pocket 6-7 – DDIN head unit provision 8-9 SWC Instructions – Wiring instructio.
1. Unclip and remove the trim panel surrounding the display and including the a/c vents. (Figure A) 2. Remove (2) Phillips screws exposed behind vent/display trim panel. (Figure B) 3. Unclip and remove the lower trim panel around the bottom of the radio panel.
4. Remove (1) Phillips screw per side of radio chassis exposed behind lower trim panel. (Figure D) 5. Remove radio/climate control assembly from the sub dash. 6. Remove (4) Phillips screws securing the radio chassis to the factory radio trim panel. Lift up slightly and proceed to step 7.
8. Remove the unified meter a/c amp from radio chassis assembly . (Figure G) 9. Remove (8) Phillips screws securing the switch panel to the radio trim panel.
6 Kit Assembly 99-7612 ISO DIN head unit provision with pocket (Figure B) (Figure C) 1. T rim the shaded areas from the factor y radio trim panel. (Figure A) Do not cut the locator and screw hole off as they will be necessary to mount the 99-7612 radio housing.
7 ISO DIN head unit provision with pocket (Figure D) (Figure E) 5. Mount the Unified Amp Meter to the radio/bracket assembly using (2) supplied 3/8” Phillips screws.
8 DDIN head unit provision (Figure B) (Figure C) 1. T rim the shaded areas from the factor y radio trim panel. (Figure A) Do not cut the locator and screw hole off as they will be necessary to mount the 99-7612 radio housing. (See detail) 2. Attach the 99-7612 Radio Housing to the Radio T rim Panel using (4) supplied 3/8” Phillips screws.
9 DDIN head unit provision (Figure D) 4. Mount the Unified Amp Meter to the radio/bracket assembly using (2) supplied 3/8” Phillips screws. (Figure D) 5. Plug the factory harness removed in disassembly into the 99-7612. 6. Mount the whole DDIN radio/meter assembly to the radio trim panel using (4) supplied 3/8” Phillips screws.
10 99-7612 Wiring Instructions From the included 7612 harness: 1. Plug the black 16-way connector into the 99-7612. 2. Plug the black 12-way connector into the 99-7612.
11 99-7612 Wiring Instructions SWC Programming After all connections are made, turn ignition and the 7612 buttons will flash the number of times that correspond with the radio installed (See list below). After the LED goes out test SWC functions. Force mapping a radio type Programming must take place within 20 seconds of turning the ignition on.
12 99-7612 SWC Button Reassignment/Remapping Let’ s say you have the 99-7612 programmed to your vehicle and your radio and you want to change the button assignment for the steering wheel controls.
13 99-7612 SWC Button Reassignment/Remapping For instance the next command to be mapped is the Volume Down command. Let’ s say you want the Mode button on your steering wheel to be the Volume Down command. Hold down the Mode button till the LED lights up solid red, and then release it.
Notes.
Notes.
METRA. THE WORLD’S BEST KITS.™ © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORA TION 1-800-221-0932 metraonline.com INST ALLA TION INSTRUCTIONS FOR PART 99-7612 REV .
An important point after buying a device Metra 99-7612B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metra 99-7612B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metra 99-7612B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metra 99-7612B you will learn all the available features of the product, as well as information on its operation. The information that you get Metra 99-7612B will certainly help you make a decision on the purchase.
If you already are a holder of Metra 99-7612B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metra 99-7612B.
However, one of the most important roles played by the user manual is to help in solving problems with Metra 99-7612B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metra 99-7612B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
