Instruction/ maintenance manual of the product Invert 130/60 Metabo
Go to page of 13
115 162 4029 / 0803 - 3.2 Bedienungsanleitung Operating Instructions Instructions de service Gebruiksaanwijzing Instrucciones de uso Invert 130/40 Invert 130/60 Achtung! Lesen Sie diese Anleitung vor der Installation und Inbetriebnahme aufmerksam durch.
ENG Table of Contents 1 Technical Specifications 2 Scope of Application 2.1 Information 3 Commissioning 4 Description 5 Operation 6 TIG-Welding (optional) 6.
2.1 Information - Shown On Type Plate The following explanations refer to the numbered boxes shown in Figure 2.3 according to ISO/IEC 60974-1. a) Identification Box l Name and address of the manufactu.
b) Welding Output Box 6 Welding process Symbol e.g.: Manual metal arc welding with covered electrodes Tungsten inert-gas welding Metal inert and active gas welding including the use of flux cored wire.
Column a) need not be used if the duty cycle (duty factor) for the rated maximum welding current is 60 % or 100 %. Column b) need not be used if the duty cycle (duty factor) at the rated maximum welding current is 100 %. c) Energy input Box 14 Energy input symbol e.
5 Operation The welding machines Invert 130/40 and 130/60 are primary clocked inverters, suitable for manual arc welding with coated stick electrodes and for direct current TIG welding (optional). The electrode diameter and the required welding current are selected according to the material to be welded.
Dust, dirt and metal chips will harm any welding machine. It is of particular importance that the air ventilation for cooling is not disabled. Prior to welding the joints must be cleaned and dirt, rust, grease and paint removed. Also slag from previous welds must be completely removed.
The correct arc length is important for a good weld, because with too short or too long an arc both welding current and working voltage change. A low working voltage causes insufficient penetration. Too high or too low welding current gives a poor welding seam.
6 TIG Welding (optional) Due to the same welding characteristics as with manual arc welding, TIG welding is possible with models Invert 130/40 and 130/60. For TIG welding a TIG torch model SR 17 V (see section 11) is used, which is always connected to the negative (-) pole.
9 Safety Precautions/Accident Prevention - This Welding Machine should only be used for its intended application (TIG and manual arc welding). - Operate machine only on power supply circuits having a fully operational protective bonding circuit (earth/ground lead).
10 Wiring Diagram Invert 130/40 and 130/60 (2) (5) (6) (1) (7) (3) (1) Power cable (2) Switch/plug (3) Control PCB (4) Transformer (5) Diodes (6) Choke (7) Fan (4) 11 Exploded View Drawing and Spare P.
D DEUTSCH ENG ENGLISH KONFORMITÄTSERKLÄRUNG DECLARATION OF CONFORMITY Wir erklären in alleiniger Verantwortlichkeit, dass dieses Produkt mit den folgenden Normen übereinstimmt* gemäß den Bestimmungen der Richtlinien**.
Country; Company; Address 1; Address 2; City; Phone; Fax; E-mail Albania; Extra Industrial Goods; Rl. Fadil Rada 88; ; Tirana; (+35 5) 42 - 3 30 62; (+355) 42 - 3 30 62; abeqiri@t-onli ne.de Algerie; Haddad Equipement Pro fessionel; 98 A, Site du Lycée ; ; 16012 Rouiba; (+213) 21 - 85 49 05; (+213) 21 - 85 57 72; heprouiba@hotmail.
An important point after buying a device Metabo Invert 130/60 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metabo Invert 130/60 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metabo Invert 130/60 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metabo Invert 130/60 you will learn all the available features of the product, as well as information on its operation. The information that you get Metabo Invert 130/60 will certainly help you make a decision on the purchase.
If you already are a holder of Metabo Invert 130/60, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metabo Invert 130/60.
However, one of the most important roles played by the user manual is to help in solving problems with Metabo Invert 130/60. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metabo Invert 130/60 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
