Instruction/ maintenance manual of the product POP-2/4 Merco Savory
Go to page of 8
INSTALLATION & PARTS AND SERVICE MANUAL POP-2/4 POP-UP TOASTER The POP-2/4 Pop-Up Toaster is designed to allow the operator to toast a wide vaariety of bread products. The wide mouth opening (1”) will accommodate varioues thicknesses of bread, from thin sliced to Texas toast.
TABLE OF CONTENTS OPERATING INSTRUCTIONS------------------------------------------------------------------- 2 CLEANING INSTRUCTIONS---------------------------------------------------------------------.
INSTALLATION Install the POP-2/4 in the most convenient location for ease of cleaning, maintenance, and general operation. Avoid installing in locations with drafts, close proximity to grease or vapor-producing appliances, or other high ambient heat equipment.
SEQUENCE OF OPERATIONS On the POP2/4 toaster, the sequence of operations is separate but identical for both left and right toasting slots. Power is permanently supplied to the power switch. Depressing the toast arm closes the power switch which supplies voltage to the control board.
REMOVAL, INSTALLATION AND ADJUSTMENTS CAUTION: UNPLUG UNIT AND ALLOW TO COOL BEFORE ATTEMPTING ANY SERVICE PROCEDURES IN THIS MANUAL A. CASE COVER / CONTROL PANEL 1. Carefully place toaster upside down on a non-abrasive surface 2 Remove crumb tray. 3.
C. P .C. BOARD 1. Remove case cover and control panel. (Section A) 2. Remove knob from front of control panel. NOTE: Thecontrol knob on the front panel consists of two parts the knob and the knob cap. The cap must be snapped off before removing the knob.
WARNING (FOR MODELS MANUFACTURED BEFORE 9/1/90) WHEN ATTACHING WIRE CONNECTIONS< MAKE SURE CARGLAS SLEEVING IS FULLY INSERTED THROUGH OPENINGS AND COMPLETELY COVER TERMINAL ENDS. FAILURE TO DO SO WILL CAUSE ELECTRICAL SHORTING. G. Center Heater Card Assembly 1.
Figure 5 Figure 6 8.
An important point after buying a device Merco Savory POP-2/4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Merco Savory POP-2/4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Merco Savory POP-2/4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Merco Savory POP-2/4 you will learn all the available features of the product, as well as information on its operation. The information that you get Merco Savory POP-2/4 will certainly help you make a decision on the purchase.
If you already are a holder of Merco Savory POP-2/4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Merco Savory POP-2/4.
However, one of the most important roles played by the user manual is to help in solving problems with Merco Savory POP-2/4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Merco Savory POP-2/4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
