Instruction/ maintenance manual of the product BT-1 Merco Savory
Go to page of 4
0201-JDM 07151 INSTALLATION & OPERATION MANUAL for BT-1 Mini Conveyor Bagel Toaster THIS MANUAL SHOULD BE RETAINED FOR FUTURE USE BEFORE INSTALLATION NOTE: Upon receipt of this unit, immediately unpack and inspect for possible concealed shipping damage.
2 INSTALLATION INSTRUCTIONS Install the BT-1 in the most convenient location for ease of cleaning, maintenance and general operation. Avoid installing in locations with drafts, close proximity to grease or vapor-producing appliances or other high ambient heat equipment.
3 CONTROL PANEL FEATURES Main Power Switch - This switch is located to the left of the panel, has three positions: Stand-By, Off and Full Power. It controls the power going to the conveyor system and the heating element.. When the switch is in the “Full” position all available power is reaching the heating elements.
1111 N Hadley Rd. Fort Wayne, In. 46804 Tel. 800-701-2992 Fax (260) 436-0735 www.mercosavory.com 4 CLEANING INSTRUCTIONS CAUTION: UNPLUG TOASTER AND ALLOW TO COOL BEFORE CLEANING. The BT-2 is designed for easy cleaning. The lustrous outer surfaces need nothing more than a daily wiping with a soft damp cloth.
An important point after buying a device Merco Savory BT-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Merco Savory BT-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Merco Savory BT-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Merco Savory BT-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Merco Savory BT-1 will certainly help you make a decision on the purchase.
If you already are a holder of Merco Savory BT-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Merco Savory BT-1.
However, one of the most important roles played by the user manual is to help in solving problems with Merco Savory BT-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Merco Savory BT-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
