Instruction/ maintenance manual of the product MT1091 Memorex
Go to page of 20
MT1091 9” Color Television Owner’s Manual Multi Function Remote On Screen Display VOLUME CHANNEL POWER R As an E NERGY S TAR ® Partner, MEMCORP has determined that this product meets the E NERGY S TAR ® guidelines for energy efficiency.
– 1 – BEFORE YOU OPERATE YOUR NEW TELEVISION To get the most from your new color television, read and follow this Owner’s Manual carefully. INSTALLATION GUIDELINES • Place your TV in a room with adequate ventilation. • Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.
– 2 – FEATURES • On-screen graphics guide you through setup features and operations • Automatic programming of channels allows easy selection of stations available in your viewing area • Sle.
– 3 – LOCATION OF CONTROLS IN VIDEO EXT.ANT. UHF/VHF AUDIO DC−12V Multi Function Remote On Screen Display VOLUME CHANNEL POWER R 7 6 5432 1 @!0 9 8 7 EARPHONE JACK ( ) 8 ANTENNA HOLDER 9 AUDIO IN (put) JACK 10 VIDEO IN (put) JACK 11 DC INPUT JACK 12 VHF/UHF EXT.
– 4 – The REMOTE CONTROL unit requires two 1.5 volt “ AA ” size batteries. The BATTERY COMPARTMENT is located on the back of the unit. To open, press down of the lid and slide toward the bottom of the unit. Install the batteries exactly as shown by the diagram in the compartment.
– 5 – CHANNEL VOLUME MUTE MENU RECALL SLEEP TV/VIDEO POWER Q.REV. Remote Control Number Buttons Press to select a channel. For channels 1-9, press 0, then the channel you want to watch. For example, for channel 6, press 0, 6. For channels 100-125, press the 100 button, then press the last two digits of the channel you want to watch .
– 6 – ANTENNA CONNECTIONS If you are using an indoor antenna (included) or an outdoor antenna (not included) follow the instructions below that correspond to your antenna system. If you are using a cable television service (CATV), refer to CATV connections.
– 7 – A — Allows viewing of scrambled channels through converter/descrambler box. B — Allows full use of TV tuner and Remote Control. NOTE: For other cable connections, consult your cable company. Some cable companies offer “ premium pay ” channels in which the signal is scrambled.
– 8 – You can connect the TV to a household outlet or to the cigarette lighter of your car. AC Power Connect the polarized AC cord plug to a 120V AC 60Hz household outlet. NOTES 1. NEVER CONNECT THE AC LINE CORD PLUG TO OTHER THAN THE SPECIFIED VOLTAGE.
– 9 – SELECTING A LANGUAGE QUICK USE GUIDE If you ’ re already familiar with TV hookup and operation, just follow the quick steps below to make some basic connections and adjustments before using your new TV. a Place batteries in the remote control.
– 10 – SETTING THE CLOCK a Press the MENU button twice to bring up the menu screen and select CLOCK SET. CLOCK SET SUN – – : – – AM EXIT [MENU] : MOVE [+] / [ – ] : ADJUST s Use the + or – button to select the cor- rect day of the week.
– 11 – PROGRAMMING CHANNELS With automatic programming, the TV automatically places every channel you receive in its memory, allowing you to scan through those channels when you press the CHANNEL (Up/Down) buttons. With manual programming, you tell the TV what channels you want to scan through when you press the CHANNEL (Up/Down) buttons.
– 12 – ADDING/DELETING CHANNELS Manual Programming a Press the MENU button to bring up the menu screen. MENU TUE 1:35PM CLOCK SET PROGRAM TIMER PICTURE ADJUST CH PROGRAM LANGUAGE DEMONSTRATION EXIT [+] / [ – ] : MENU SELECT [MENU] : ENTER s Use the + or – button to highlight CH PROGRAM, then press the MENU but- ton to select it.
– 13 – SETTING THE TIMERS You can program your TV to turn on a specific channel at a preset time once (one day timer) or at the same time every day or every week (weekly timer). You also can program your TV to turn itself off after a specified amount of time (sleep timer).
– 14 – Weekly Timer a Press the MENU button to bring up the menu screen. MENU TUE 1:35PM CLOCK SET PROGRAM TIMER PICTURE ADJUST CH PROGRAM LANGUAGE DEMONSTRATION EXIT [+] / [ – ] : MENU SELECT [MENU] : ENTER s Use the + or – button to highlight PRO- GRAM TIMER, then press the MENU button.
– 15 – Sleep Timer a Press the SLEEP button to bring up the sleep timer screen. SLEEP 00 s Press the SLEEP button until the desired sleep time (10, 20, 30, 40, 50, 60, 70, 80 or 90 minutes) appears on-screen. The timer will begin counting down to zero, and the on-screen display will dis- appear.
– 16 – ADJUSTING THE PICTURE a Press the MENU button to bring up the menu screen. MENU TUE 1:35PM CLOCK SET PROGRAM TIMER PICTURE ADJUST CH PROGRAM LANGUAGE DEMONSTRATION EXIT [+] / [ – ] : MENU SELECT [MENU] : ENTER s Use the + or – button to highlight PIC- TURE ADJUST, then press the MENU button.
– 17 – USING THE AUDIO, VIDEO AND EARPHONE JACKS Audio/Video Input The AUDIO and VIDEO IN (put) jacks on the back of the TV allow you to receive au- dio (sound) and video (picture) from exter- nal sources, such as VCR, Video Disc, etc. Follow the instructions below to play video from an external source.
– 18 – CABLE TV OPERATION a Press the MENU button to bring up the main menu screen. s Use the + or – button to highlight CH PROGRAM, then press the MENU button to select it.
– 19 – PROBLEM SOLUTION • Make sure the unit is plugged in. • Unplug the unit from the electrical outlet for 60 seconds. Then plug it in and turn it on again. No Power • Make sure the antenna is properly connected at the back of the TV. • Make sure the antenna is not broken.
An important point after buying a device Memorex MT1091 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Memorex MT1091 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Memorex MT1091 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Memorex MT1091 you will learn all the available features of the product, as well as information on its operation. The information that you get Memorex MT1091 will certainly help you make a decision on the purchase.
If you already are a holder of Memorex MT1091, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Memorex MT1091.
However, one of the most important roles played by the user manual is to help in solving problems with Memorex MT1091. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Memorex MT1091 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
